Kohler K-6665 Bedienungsanleitung

Installation Guide

Beverage Faucet and Optional Water Filtration

System

Mproduct numbers are for Mexico (i.e. K-12345M)

Los números de productos seguidos de

Mcorresponden a México (Ej.

K-12345M)

Français, page “Français-1”

Español, página “Español-1”

K-6665, K-6665-F K-6666, K-6666-F

1015061-2-G

Thank You For Choosing Kohler Company

We appreciate your commitment to Kohler quality. Please take a few

minutes to review this manual before you start installation. If you

encounter any installation or performance problems, please don’t

hesitate to contact us. Our phone numbers and website are listed on

the back cover. Thanks again for choosing Kohler Company.

Tools and Materials

Before You Begin

CAUTION: Risk of property damage. Do not install the unit

where the temperature may drop below freezing, may be

exposed to direct sunlight, or may be exposed to heat.

CAUTION: Risk of personal injury or property damage. Use

caution when installing near water pipes or electrical lines.

Observe all local plumbing and building codes.

Shut off the main water supply.

If possible, install the faucet before installing the sink.

Inspect the hoses for any sign of damage. Replace if necessary.

Install the water ﬁltration system to a cold water supply only. Do

not install the water ﬁltration system to a hot water supply.

If needed, clean the exterior of the unit with mild soap and water.

Do not use chemical cleaners.

The water ﬁltration system must be mounted vertically.

Do not use this water ﬁlter system with a standard faucet that

uses hot and cold inlets. A single inlet faucet, such as a Kohler

beverage faucet, must be used.

Thread

Sealant Tape

Adjustable

Wrench Phillips

Screwdriver Screws

1015061-2-G 2 Kohler Co.

Before You Begin (cont.)

The water ﬁltration system is designed to be installed under a

sink. Make sure that the bottom of the ﬁlter cartridge is at least 2″

(5.1 cm) from the ﬂoor of the cabinet.

Do not connect the water ﬁltration system to a dishwasher.

Do not install the water ﬁltration system to a water line with

more than 125 psi (862 kPa).

To ensure that this equipment is functioning properly and

effectively, replace the ﬁlter components after 10 years.

Replacement date:___________

Retain this installation guide for future use.

Kohler Co. reserves the right to make revisions in the design of

faucets without notice, as speciﬁed in the Price Book.

Kohler Co. 3 1015061-2-G

1. Install the Faucet Body

Contemporary Faucet

Install the O-ring into the groove in the bottom of the escutcheon.

Slide the escutcheon over the hose and stud so it rests against the

faucet bottom.

Traditional Faucet

Install the O-ring into the groove in the bottom of the faucet

body.

All Installations

Position the hose and stud through the sink hole and position the

faucet over the sink hole.

From under the sink, slide the hole in the bracket onto the stud.

Tighten the nut against the bracket to secure the faucet body to

the sink.

If you are not installing the optional water ﬁltration system,

proceed to the ″Connect the Supply″section of this guide.

Stud

Hose

O-Ring

Contemporary Faucet

Faucet

Bottom

Escutcheon

(Contemporary

Only)

Faucet

Stud

Hose

Sink Hole

Bracket Nut

Traditional Faucet

1015061-2-G 4 Kohler Co.

2. Assemble the Water Filtration System

Inspect the plumbing and supplies for damage. Replace or repair

as needed.

Write the system replacement date on the ﬁlter head label. This is

the installation date plus ten years.

Place the mounting bracket over the port marked ″OUTLET″on

the ﬁlter head.

Attach the mounting bracket to the ﬁlter head using the screws

provided. Do not overtighten.

NOTE: Apply four layers (four turns) of thread sealant tape to the

threads of each nipple to ensure a tight seal.

Apply four layers of thread sealant to the threads below each

nipple hex.

NOTE: Do not overtighten the nipple hex. The nipple hex should

not make contact with the ﬁlter head.

Thread the taped end of each nipple into the inlet and outlet port

of the ﬁlter head until ﬁnger tight plus one turn maximum. The

nipple hex should not make contact with the ﬁlter head.

Screws

Inlet

Outlet

Mounting

Bracket

Filter

Head

Filter Head

Nipples

Hoses

Hex

Apply thread

sealant tape.

Kohler Co. 5 1015061-2-G

3. Mounting the Water Filtration System

CAUTION: Risk of property damage. Do not install the unit

where the temperature may drop below freezing, may be

exposed to direct sunlight, or may be exposed to heat.

CAUTION: Risk of personal injury or property damage. Use

caution when installing near water pipes or electrical lines.

IMPORTANT! The unit must be mounted vertically.

IMPORTANT! The mounting location of the water ﬁltration system

is critical. Verify the following before mounting: the bottom of the

ﬁlter cartridge will be at least 2″(5.1 cm) from the ﬂoor of the

cabinet, the system will not interfere with other items under the

counter, and the hoses will not be under tension when installed to

the ports on the ﬁlter head.

Align the mounting holes of the mounting bracket at the

determined location.

Mark the mounting hole locations with a pencil. Set the unit

aside.

Pre-drill the holes, if necessary.

Partially thread the screws into the cabinet wall and slide the

mounting bracket over the screws.

Secure the screws into the cabinet wall.

Mounting

Bracket

Screws

(Not Supplied)

1015061-2-G 6 Kohler Co.

4. Install the Water Filtration Cartridge

Write the installation date on the new ﬁlter cartridge label.

Remove and discard the cap from the cartridge.

Inspect the cartridge for damage.

Verify both O-rings are present and positioned correctly in the

grooves.

Moisten the O-rings with water. Do not use petroleum products

to lubricate the O-rings.

Align the groove in the top of the cartridge with the word ″OFF″

on the ﬁlter head.

Insert the top of the cartridge into the ﬁlter head and turn the

cartridge counterclockwise 90° until hand-tight.

O-Rings

Cap

Cartridge

Filter Head

Groove

Write the date on

the cartridge label.

Kohler Co. 7 1015061-2-G

5. Connect the Supply

For installations using the water ﬁltration system:

NOTE: The hoses must be connected as directed. Do not reverse the

connections.

Using the provided adapter, connect the outlet hose from the

outlet port on the ﬁlter head to the faucet inlet.

Connect the inlet hose from the inlet port on the ﬁlter head to the

cold water supply.

For installations not using the water ﬁltration system:

NOTE: The faucet inlet hose will connect directly to a 3/8″male

compression ﬁtting.

Connect the faucet inlet hose to the cold water supply.

6. Installation Checkout

Turn on the main water supply and check for leaks. Repair as

needed.

Outlet

Hose

Cold

Water

Supply

Faucet

Inlet Hose

Adapter

Cartridge

1015061-2-G 8 Kohler Co.

Installation Checkout (cont.)

If the optional water ﬁltration system has been installed using the

K-203 ﬁlter, run the faucet for ten minutes to remove any air in

the system. For all other ﬁlters, run the faucet for two minutes.

Any air left in the system may temporarily cause the water to be

cloudy. If the optional water ﬁltration system has not been

installed, run water through the faucet for one minute to remove

any debris.

Kohler Co. 9 1015061-2-G

Guide d’installation

Robinet de fontaine et système optionnel de

ﬁltration d’eau

Outils et matériels

Merci d’avoir choisi la compagnie Kohler

Nous apprécions votre engagement envers la qualité Kohler. Veuillez

prendre s’il vous plaît quelques minutes pour lire ce manuel avant de

commencer l’installation. Ne pas hésiter à nous contacter en cas de

problème d’installation ou de fonctionnement. Nos numéros de

téléphone et notre adresse du site internet sont au verso. Merci encore

d’avoir choisi la compagnie Kohler.

Avant de commencer

ATTENTION : Risque d’endommagement du matériel. Ne pas

installer l’unité où la température pourrait baisser en dessous du

seuil du gel, peut être exposée à la lumière du soleil, ou à la

chaleur.

ATTENTION : Risque de blessures ou d’endommagement du

produit. Porter une attention particulière lors de l’installation

près de conduites d’eau et de câbles électriques.

Respecter tous les codes de plomberie et de bâtiment locaux.

Couper l’alimentation d’eau principale.

Si possible, installer le robinet avant d’installer l’évier.

Clé à molette

Tournevis

cruciforme Vis

Ruban d'étanchéité

pour tige filetée

Kohler Co. Français-1 1015061-2-G

Andere Handbücher für K-6665

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Kohler Sanitärprodukte Handbücher

Kohler

Kohler K-5814 Montageanleitung

Kohler

Kohler K-2271 Bedienungsanleitung

Kohler

Kohler K-3422 Bedienungsanleitung

Kohler

Kohler K-T13140 Bedienungsanleitung

Kohler

Kohler K-158 Bedienungsanleitung

Kohler

Kohler K-1844 Montageanleitung

Kohler

Kohler Iron Works K-2822 Bedienungsanleitung

Kohler

Kohler K-7114 Bedienungsanleitung

Kohler

Kohler Centerset K-15885 Montageanleitung

Kohler

Kohler 16366 Bedienungsanleitung

Kohler

Kohler K-6227 Montageanleitung

Kohler

Kohler K-2958 Montageanleitung

Kohler

Kohler Stillness K-956 Bedienungsanleitung

Kohler

Kohler K-T15231 Bedienungsanleitung

Kohler

Kohler K-8807 Bedienungsanleitung

Kohler

Kohler K-78172-BN Bedienungsanleitung

Kohler

Kohler K-2293 Montageanleitung

Kohler

Kohler K-7914 Montageanleitung

Kohler

Kohler Trend K-11935 Montageanleitung

Kohler

Kohler K-7825 Bedienungsanleitung

Kohler

Kohler 18492-CP Montageanleitung

Kohler

Kohler Rapport K-1496-H2 Bedienungsanleitung

Kohler

Kohler K-2529 Montageanleitung

Kohler

Kohler K-14281 Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung

Sanela

Sanela SLVN 07 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67478W-6001 Montageanleitung

Sterling Plumbing

Sterling Plumbing C741 Bedienungsanleitung