Kohler Mira Escape Thermostatic 9.0 kW J95Hb/c Bedienungsanleitung

11060688-W2-P

These instructions must be left with the user

Mira Escape Thermostatic

9.0, 9.8 kW

Installation and User Guide

For SPARES,

ADVICE or REPAIRS

please call us free

on 0800 001 4040

(UK only)

21060688-W2-P

WARNING - This shower can deliver scalding temperatures, cause

re, electric shock or other personal injury if not operated, or

maintained in accordance with the instructions, warnings and

cautions contained in this guide and on the appliance.

Please read the important safety information and the operation section

of this guide before using the shower. Failure to follow the instructions

provided with this shower will invalidate the guarantee.

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

1. Children younger than 3 years should not use this shower. Children

3 years to under 8 years should only use this shower under

continuous supervision. Children aged 8 years and above and

persons with reduced physical, sensory or mental capabilities or

lack of experience or knowledge can use the shower if they are

given supervision or instruction concerning use of the appliance

in a safe way and understand the hazards involved.

2. Children shall not be allowed to play with the shower.

3. DO NOT restrict the water ow from the shower outlet, temporarily

bending the shower hose or blocking the shower head while in use

can cause a hot shot of water to be discharged.

4. Cleaning and user maintenance shall not be made by children

without supervision.

5. The outlet must not be connected to any tap or tting other than

those specied.

6. The showerhead must be descaled regularly. Any blockage of the

showerhead or hose can cause damage to the shower.

7. Warning! DO NOT switch on if there is a possibility that the water

in the heater is frozen.

8. The shower must be provided with means for local disconnection

from the supply mains having a contact separation in all poles

that provide full disconnection under overvoltage category III,

the instructions state that means for disconnection must be

incorporated in the xed wiring in accordance with the wiring rules.

Important Safety Information

31060688-W2-P

9. Installation of the shower must be carried out in accordance with

these instructions by qualied, competent personnel. Read all

instructions before installing the shower.

10.DO NOT switch the shower on if water starts leaking from the shower

case. Isolate the electrical supply to the shower immediately.

11.DO NOT switch the shower on if the case appears to be damaged

or incorrectly tted. Isolate the electrical supply to the shower

immediately.

12.DO NOT increase the power setting or adjust the temperature

control rapidly while using the shower.

13.DO NOT switch the shower o󰀨 and back on while standing in the

water ow.

14.DO NOT change the handset model. Fit only shower heads

recommended by Mira and do no t any additional device to restrict

the water outlet ow.

15.When adjusting the handset mode, point handset away from body

and make sure that the water temperature has stabilised before

continuing to shower.

16.Use caution when altering the water temperature, always check

the temperature before continuing to shower.

17. Switch the shower o󰀨 at the electrical isolating switch when not in

use. This is recommended with all electrical appliances.

18.Installation of the shower must be carried out in accordance with

these instructions by qualied, competent personnel. Read all

instructions before installing the shower.

19.Isolate the electrical and water supplies before commencing

installation. The electricity must be isolated at the consumer unit

and the appropriate circuit fuse removed, if applicable. Mains

connections are exposed when the cover is removed.

20.DO NOT install the shower in areas with high humidity and

temperature (i.e. Steam rooms and saunas).

21.DO NOT install the shower where it may be exposed to freezing

conditions. Ensure that any pipework that could become frozen is

properly insulated.

41060688-W2-P

22.DO NOT connect the outlet of the shower to any tap, control valve,

trigger operated handset or showerhead other than those specied

for use with this shower as the outlet acts as a vent for the tank

body. Only Kohler Mira recommended accessories should be used.

23.DO NOT perform any unspecied modications, or drill or cut holes

in the product other than instructed by this guide. When servicing

only use genuine Kohler Mira replacement parts.

24.Always check the water temperature is safe before entering the

shower.

25.The water supplies to this product must be isolated if the product is

not to be used for a long period of time. If the product or pipework

is at risk of freezing during this period they should also be drained

of water.

26.If the shower is dismantled during installation or servicing then,

upon completion, an inspection must be made to ensure all

electrical connections are tight and that there are no leaks.

27.This appliance is intended to be permanently connected to the

water mains and not connected by a hose set.

28.The water inlet of this appliance shall not be connected to a water

supply obtained from any other water heating system.

29.Warning! This appliance is not to be used to provide a potable

water supply.

30.Maximum Static Pressure is 1000 kPa (10 bar).

31.Minimum Dynamic Pressure is 70kPa (0.7 bar) 9.0 kW and 9.8 kW

Decommissioning and Recycling

When this appliance has reached the end of its serviceable life, it

should be disposed of in a safe manner, in accordance with current

local authority recycling, or waste disposal policy. For more information

about recycling, please contact your local council o󰀩ce.

51060688-W2-P

Pack Contents

1 x Mira Escape

1 x Compression Nut

1 x Olive

3 x Case Inserts

Tick the appropriate boxes to familiarize yourself with the part names and to conrm

that the parts are included.

Documentation

1 x Installation and User Guide 1 x Installation Template

1 x Guarantee and Registration Document

Wiring Diagram

BROWN

BROWN BROWN

BLUE

GREEN

BROWN

BLACK

BLACK BLACK

RED

Thermal Cutout

Dual Disc

Tank Connection

Load

Inlet Connector

Pressure/Power

Selector Switch

Solenoid Valve

Low Flow Neon

Power On

Neon

START/STOP

Internal Wiring Diagram

61060688-W2-P

Design Registration: 000373543-0003

Patents: GB: 2 341 667, 2 404 000, 2 427 460,2 428 286

Ireland: 82835, 85128, 85163, 85912

Thank you for choosing a Mira shower. To enjoy the full potential of your new shower,

please take time to read this guide thoroughly, and keep it handy for future reference.

Products manufactured by Kohler Mira Ltd are designed to be safe, provided that

they are installed, used and maintained in good working order, in accordance with

our instructions and recommendations.

Follow all warnings, cautions and instructions contained in this guide, and on, or

inside the shower. This guide is also available in digital format from our website or

by contacting customer services.

Domestic Light Commercial 

Heavy Commercial Healthcare 

Product Variant Model No. Colour

Mira Escape 9.0 kW J95Hb/c Chrome, Satin/Chrome

Mira Escape 9.0 kW J95Hf White

Mira Escape 9.8 KW J95G/H Chrome, Satin/Chrome

Mira Escape 9.8 KW J95Gc White

Introduction

Products Covered

Recommended Usage

Patents and Design Registration

71060688-W2-P

Specications

Dimensions

Height 348 mm

Width 207 mm

Depth 90 mm

Electrical Variant

Escape 9.0 Escape 9.8

Nominal Power at 230 V ac 8.3 kW 9.0 kW

Nominal Power at 240 V ac 9.0 kW 9.8 kW

Recommended MCB Rating 40 A 45 A

Maximum Supply Cable Size 16 mm²

Recommended RCD Rating 30 mA tripping current

Recommended Isolator Switch 45 A double-pole with 3 mm contact separation

Appliance Sealing Rating IP X4 - Suitable for installation in Zone 1

Maximum Ambient Temperature 30°C

Minimum Ambient Temperature 2°C

Plumbing

Variant

Escape 9.0 Escape 9.8

Minimum Dynamic Pressure 70 kPa (0.7 bar) 70 kPa (0.7 bar)

Maximum Dynamic Pressure 500 kPa (5 bar)

Maximum Static Pressure 1000 kPa (10 bar)

Minimum Static Pressure 20 kPa (0.2 bar)

Maximum Inlet Temperature 30°C

Minimum Inlet Temperature 2°C

Inlet Connection 1/2” BSP Male / 15 mm Compression Fitting

Maximum Water Hardness 200 ppm CaCO3

Outlet Connection 1/2” BSP Male

81060688-W2-P

European Conformity Information

For domestic installations, Mira Showers guarantee the Mira Escape 9.0 kW and

9.8 kW against any defect in materials or workmanship for a period of two years

from the date of purchase (shower ttings for one year).

For non-domestic installations, Mira Showers guarantee the Mira Escape 9.0 kW

and 9.8kW against any defect in materials or workmanship for a period of one year

from the date of purchase. For terms and conditions refer to section “Customer

Services”.

Guarantee

The Mira Escape range of showers comply with the following European directives:

2006/95/EC Low Voltage Directive, 2004/108/EC EMC Directive.

The Mira Escape range of showers are high power appliances and are subject to

conditional connection. If the main electrical supply fuse is rated less than 80 Amps,

the local electricity supply company must be contacted to conrm if the electrical

supply is adequate.

The Mira Escape range of showers comply with the requirements of the UK’s water

regulations.

91060688-W2-P

Installation Requirements

Plumbing

1. The plumbing installation must comply with all national or local water regulations

and all relevant building regulations, or any particular regulation or practice

specied by the local water supply company.

2. DO NOT use sealing compounds on any pipe tting or joints.

3. DO NOT install the product in a position in which service access is limited.

4. Decide on a suitable position for the shower (minimum distance of 200 mm from

the ceiling to allow for cover t and removal).

5. The position of the shower and shower ttings must provide a minimum gap of

25 mm between the showerhead and the spill over level of any bath, shower

tray or basin and a minimum gap of 30 mm between the showerhead and the

spill over level of any toilet, bidet or other appliance with a Fluid Category 5

backow risk (see diagram on page 10).

6. The shower is suitable for installation within the shower area and is tted with

a pressure relief valve. It must be positioned over a water catchment area with

the controls at a convenient height for the user.

7. The shower must be tted to a waterproof at and even wall surface.

8. DO NOT t the shower to the wall and tile up to the case.

9. DO NOT seal the gap between the shower and the wall surface.

10. The showerhead should be positioned so that it discharges down the centre

line of the bath or across the opening of a shower cubicle.

11. The showerhead must be directed away from the shower unit, during normal

use the showerhead must not spray directly on to the shower unit.

12. DO NOT apply excessive force to plumbing connections; always provide

mechanical support when making plumbing connections. Any soldered joints

should be made before connecting the shower.

13. This shower is not designed to be plumbed directly from the rear. For rear-entry

supply, add an elbow to the supply pipe and connect as a rising or a falling

supply.

14. If pipework and/or electrical cables enter the shower from the rear through a

hole in the wall provision must be made to prevent water ingress back into the

wall structure.

15. Only use the inlet connector supplied with the shower. DO NOT use any other

type of tting.

16. A full bore/non restrictive servicing valve must be tted in a readily accessible

position adjacent to the shower to facilitate maintenance of the shower.

DO NOT use a valve with a loose washer plate (jumper) as this can lead to a

build up of static pressure.

101060688-W2-P

Zone of

Backflow Risk

30 mm

Minimum

Toilet or Bidet

FC5

Hand Basin

FC3

Bath or Shower

Tray FC3

Electric

Shower

25 mm

Minimum

25 mm Minimum

17. A water treatment device should be installed where the water hardness may

exceed 200 ppm. Malfunctions caused by excessive limescale formation are

not covered by this shower’s guarantee (see back page for details).

18. The installation must not cause the hose to be sharply kinked during normal

use.

19. DO NOT perform the electrical installation until the plumbing has been completed

and checked for leaks.

Hose retaining ring tted and shower ttings xed at a suitable height

preventing dirty water backow

Note: There will be occasions when the hose retaining ring will not provide

a suitable solution for Fluid Category 3 installations, in these instances

an outlet double check valve must be tted, this will increase the required

supply pressure typically by 10kPa (0.1 bar). Double check valves tted in

the inlet supply to the appliance cause a pressure build up, which a󰀨ect

the maximum static inlet pressure for the appliance and must not be tted.

For Fluid category 5 double check valves are not suitable.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kohler Sanitärprodukte Handbücher

Kohler

Kohler K-7514 Bedienungsanleitung

Kohler

Kohler K-8220 Bedienungsanleitung

Kohler

Kohler ELLISTON 75522T-4 Bedienungsanleitung

Kohler

Kohler 10586-4-SN Montageanleitung

Kohler

Kohler K-476, K-477 Montageanleitung

Kohler

Kohler K-35025-DWG Bedienungsanleitung

Kohler

Kohler LOURE 98452T-CP Bedienungsanleitung

Kohler

Kohler FAMILY CARE Bedienungsanleitung

Kohler

Kohler K-2529 Montageanleitung

Kohler

Kohler K-6814-3 Montageanleitung

Kohler

Kohler KUMIN 98827IN-4/4ND Series Bedienungsanleitung

Kohler

Kohler 72282T-4 Service-Handbuch

Kohler

Kohler K-2953 Montageanleitung

Kohler

Kohler K-98835T-L Bedienungsanleitung

Kohler

Kohler K-T944 Montageanleitung

Kohler

Kohler K-4709 Bedienungsanleitung

Kohler

Kohler K-690 Bedienungsanleitung

Kohler

Kohler K-5814 Montageanleitung

Kohler

Kohler JULY 16316M-4 Bedienungsanleitung

Kohler

Kohler K-1243 Bedienungsanleitung

Kohler

Kohler K-7344 Montageanleitung

Kohler

Kohler K-11550 Montageanleitung

Kohler

Kohler K-7305 Betriebsanleitung

Kohler

Kohler MasterShower K-T9472 Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung

Sanela

Sanela SLVN 07 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67478W-6001 Montageanleitung

Sterling Plumbing

Sterling Plumbing C741 Bedienungsanleitung