Kohler Mira Event XS Bedienungsanleitung

11293809-W2-E

Installation & User Guide

These instructions must be left with the user

Mira Event XS

Thermostatic Power Shower

21293809-W2-E

Important Safety Information

WARNING - This shower can deliver scalding temperatures, cause

re, electric shock or other personal injury if not operated, or

maintained in accordance with the instructions, warnings and

cautions contained in this guide and on the appliance.

Please read the important safety information and the operation section

of this guide before using the shower. Failure to follow the instructions

provided with this shower will invalidate the guarantee.

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

1. Children younger than 3 years should not use this shower. Children

3 years to under 8 years should only use this shower under

continuous supervision. Children aged 8 years and above and

persons with reduced physical, sensory or mental capabilities or

lack of experience or knowledge can use the shower if they are

given supervision or instruction concerning use of the appliance

in a safe way and understand the hazards involved.

2. Children shall not be allowed to play with the shower.

3. Cleaning and user maintenance shall not be made by children

without supervision.

4. Theoutletmustnotbeconnectedtoanytaporttingotherthan

thosespecied.

5. The showerhead must be descaled regularly. Any blockage of the

showerhead or hose can cause damage to the shower.

6. Warning! DO NOT switch on if there is a possibility that the water

in the heater is frozen.

7. The shower must be provided with means for local disconnection

from the supply mains having a contact separation in all poles

that provide full disconnection under overvoltage category III,

the instructions state that means for disconnection must be

incorporatedinthexedwiringinaccordancewiththewiringrules.

8. Installation of the shower must be carried out in accordance with

these instructions by qualied, competent personnel. Read all

instructions before installing the shower.

31293809-W2-E

9. DO NOT switch the shower on if water starts leaking from the shower

case. Isolate the electrical supply to the shower immediately.

10. DO NOT switch the shower on if the case appears to be damaged

or incorrectly tted. Isolate the electrical supply to the shower

immediately.

11. DO NOT increase the power setting or adjust the temperature

control rapidly while using the shower.

12. DO NOTswitchtheshowero󰀨andbackonwhilestandinginthe

waterow.

13. DO NOT change the handset model. Fit only shower heads

recommendedbyMiraanddonotanyadditionaldevicetorestrict

thewateroutletow.

14. When adjusting the handset mode, point handset away from body

and make sure that the water temperature has stabilised before

continuing to shower.

15. Use caution when altering the water temperature, always check

the temperature before continuing to shower.

16.Switchtheshowero󰀨attheelectricalisolatingswitchwhennotin

use. This is recommended with all electrical appliances.

17. Installation of the shower must be carried out in accordance with

these instructions by qualied, competent personnel. Read all

instructions before installing the shower.

18. Isolate the electrical and water supplies before commencing

installation. The electricity must be isolated at the consumer unit

and the appropriate circuit fuse removed, if applicable. Mains

connections are exposed when the cover is removed.

19. DO NOT install the shower in areas with high humidity and

temperature (i.e. Steam rooms and saunas).

20. DO NOT install the shower where it may be exposed to freezing

conditions. Ensure that any pipework that could become frozen is

properly insulated.

21. DO NOT connect the outlet of the shower to any tap, control valve,

triggeroperatedhandsetorshowerheadotherthanthosespecied

for use with this shower as the outlet acts as a vent for the tank

body. Only Kohler Mira recommended accessories should be used.

41293809-W2-E

Disposal and Recycling

End of Product Life

Electrical and electronic devices contain a range of materials that can

be separated for recycling and used in new products.

This product should not be disposed of with your general

household waste. When this product has reached the end

of its serviceable life, please take it to a recognised WEEE

(Waste Electrical and Electronic Equipment) collection

facility such as your local civic amenity site for recycling.

Your local authority or retailer will be able to advise you of your nearest

recycling facility.

22. DO NOTperformanyunspeciedmodications,ordrillorcutholes

in the product other than instructed by this guide. When servicing

only use genuine Kohler Mira replacement parts.

23. Always check the water temperature is safe before entering the

shower.

24. The water supplies to this product must be isolated if the product is

not to be used for a long period of time. If the product or pipework

is at risk of freezing during this period they should also be drained

of water.

25. If the shower is dismantled during installation or servicing then,

upon completion, an inspection must be made to ensure all

electrical connections are tight and that there are no leaks.

26. This appliance is intended to be permanently connected to the

water mains and not connected by a hose set.

27. Maximum Inlet Static Pressure is 100 kPa (1.0 bar).

Minimum Inlet Static Pressure is 0.8 kPa (0.008 bar).

51293809-W2-E

Product Model Number Colour

Mira Event XS Thermostatic B85IB White / Chrome

The Event XS Thermostatic is a surface mounted all-in-one thermostatic power

shower. It is designed for use with a mains voltage electrical supply and gravity

fed hot and cold water supplies. It features a built-in pump unit, thermostatic mixer

assemblyandseparatepower,owandtemperaturecontrols.

The thermostatic mixer assembly responds to changes in incoming water temperature

to maintain the showering temperature selected. The temperature control is preset

to give a maximum showering temperature of 41°C. However, it can be adjusted to

suit installation or user requirements.

Anoverridebuttonisttedtothetemperaturecontrol.Thisallowstheusertooverride

the maximum temperature and select higher showering temperatures. The button

can be disabled, if required.

Theproductisttedwitha15mmdualentrypush-tinletmanifoldwhichallows

pipe connections to the top, bottom or rear of the power shower. The inlet manifold

alsocontainsinletltersandcheckvalves.

Introduction

Thank you for choosing a Mira shower. To enjoy the full potential of your new shower,

please take time to read this guide thoroughly, and keep it handy for future reference.

Products manufactured by Kohler Mira Ltd are designed to be safe, provided that they are

installed, used and maintained in good working order, in accordance with our instructions

and recommendations.

Follow all warnings, cautions and instructions contained in this guide, and on, or inside

the shower. This guide is also available in digital format from our website or by contacting

customer services.

Mira Power Showers covered by this guide:

61293809-W2-E

Ifyouexperienceanydi󰀩cultywiththeinstallationoroperationofyournewpower

shower, please refer to 'Fault Diagnosis' before contacting Kohler Mira Limited.

Our contact details can be found on the back cover of this guide.

Design Registration & Patents

Patents

UK: 2 340 210, 2 392 223, 2 392 224, 2 392 225, 2 421 297

USA: 7 240 850

Patent Applications:

Euro: 03254070.0

USA: 2007-0221740-A1

Guarantee

Recommended Usage

This product has been designed for domestic use only, Mira Showers guarantee this product

against any defect in materials or workmanship for a period of one years from the date of

purchase.

For terms and conditions, refer to the back cover of this guide.

Recommended Usage

Domestic 

Light Commercial 

Heavy Commercial 

Healthcare 

The Mira Event XS is not suitable for use in institutional/commercial applications. It

must not be used with mains water pressure applications; for example, instantaneous

electric heaters, instantaneous gas water heaters, unvented mains pressure systems,

pumped shower systems and some combination-type storage systems.

71293809-W2-E

Ticktheappropriateboxestofamiliariseyourselfwiththepartnamesandtoconrm

that the parts are included.

1 x Event XS T Thermostatic Power Shower

1xPush-FitRelease

Tool

3xRubberWallPlugs

3 x Fixing Screws

3xRubberFeet

4 x Case Inserts

Pack Contents

Documentation

1xGuaranteeRegistrationDocument

81293809-W2-E

Dimensions are in millimetres.

310

115

806628

210

Dimensions

91293809-W2-E

Specications

1. General

1.1. Ambient temperature – Maximum recommended ambient temperature for the

appliance is 30°C.

1.2. Maximum recommended hot water temperature – 65°C.

Warning! For safety reasons set the maximum stored hot water temperature

tobetween60and65°C.Suchtemperaturesareconsideredsu󰀩cienttomeet

all normal requirements and will also minimise the deposition of scale in hard

water areas.

1.3. Temperature control – To obtain the full listed performance the Mira Event XS

should be installed, operated and maintained in accordance with this guide.

1.4. The performance outlined below is achieved with a showering temperature of

between 35° and 45°C selected and water supplies of 15°C cold and 65°C hot

with nominally equal pressures.

1.4.1 The maximum temperature stop is set to 41°C. Depressing the

override button overrides the maximum temperature and the showering

temperature can be increased by 5°C to approximately 46°C.

1.4.1. The blended water temperature is maintained within 1°C with a 10°C

change in the hot or cold water supply.

1.4.2. Thesensore󰀨ectsashutdowntoseepageinapproximately2seconds

if the cold supply fails.

1.4.3. Shut down to seepage is achieved even if the hot supply is only 12°C

above the blend temperature.

1.4.4. The blended water temperature is maintained within 1.5°C when the

pressurebetweeninletandoutletishalved(denedasapressureloss

ratio of 2:1) on either the hot or cold side.

1.5. Maximum static inlet pressure – 1 bar or 10 m (supplies must be gravity-fed

atnominallyequalpressures).Refertosection:'Installation Requirements,

Plumbing'.

1.6. Minimum static inlet pressure – 0.008 bar or 80 mm (required to prime the

integral centrifugal pump). The minimum static pressure will increase for long

supplypipelengths.Refertosection:'Installation Requirements, Plumbing'.

1.7. Maximum recommended inlet pressure – 0.5 bar or 5 m (supplies must be

gravity-fed at nominally equal pressures).

1.8. MinimumFlowRate–8L/Min(withastaticinletpressureof0.1bar)andare

for valve only.

MaximumFlowRate–16L/Min(withastaticinletpressureof0.1bar).

 FlowRatesmayvaryduetodi󰀨erencesinsupplypressuresandwhenshower

ttingsinstalled.

101293809-W2-E

1.9. Duty Cycle – The Mira Event XS Thermostatic pump is continuously rated. The

motoristtedwithaself-resettingthermaltrip,designedtooperateifmotor

temperatures become too high due to abnormally high supply voltages.

1.10.Noise – The Mira Event XS is supplied with anti-vibration rubber feet and rubber

wall plugs that isolate the unit from the wall in order to minimize the amount of

noisetransmitted.ThetypeofwalltheMiraEventXSisxedtowillalsoa󰀨ect

the perceived noise level; solid walls will provide a quieter operation.

1.11 Maximum total head delivered – 1.5m

2. Plumbing

2.1. Inlet – 15mmPush-tinletmanifold.

2.2. Outlet – ½″BSP to BS2779.

3. Electrical

3.1. Appliance power supply – 230–240V,50Hz,fusedat3Amps,viaadouble

pole switched fused connection unit (not supplied) with a minimum 3 mm contact

separation in each pole.

3.2. Power supply connection – TheMiraEventXSisttedwithaterminalblock

which will accept cable up to 2.5 mm². Minimum cable size (cross-sectional

area) required under normal installation conditions is 1 mm2.

3.3. Maximum rated power – 150 Watts.

4. Approvals

4.1. The Mira Event XS complies with UKCA & CE standards.

Inhaltsverzeichnis

Andere Kohler Sanitärprodukte Handbücher

Kohler

Kohler K-7779 Bedienungsanleitung

Kohler

Kohler C3-050 Bedienungsanleitung

Kohler

Kohler 23776T-7 Bedienungsanleitung

Kohler

Kohler K-26228T Bedienungsanleitung

Kohler

Kohler K-193-4-CP Bedienungsanleitung

Kohler

Kohler Mira Moto Bedienungsanleitung

Kohler

Kohler Escale 19046W Bedienungsanleitung

Kohler

Kohler K-3099 Montageanleitung

Kohler

Kohler KUMIN 98827IN-4/4ND Series Bedienungsanleitung

Kohler

Kohler SAN RAPHAEL PRESSURE LITE K-3394 Bedienungsanleitung

Kohler

Kohler ODEON K-8766 Bedienungsanleitung

Kohler

Kohler RiverBath Quadrangle K-1365-F2 Bedienungsanleitung

Kohler

Kohler HYDRO-TOWER 200 Series Bedienungsanleitung

Kohler

Kohler K-1112 Montageanleitung

Kohler

Kohler K-2032-0 Bedienungsanleitung

Kohler

Kohler Mira Atom ERD Bedienungsanleitung

Kohler

Kohler Symbol K-T18485 Bedienungsanleitung

Kohler

Kohler K-5031 Montageanleitung

Kohler

Kohler K-T125 Bedienungsanleitung

Kohler

Kohler C3-050 Bedienungsanleitung

Kohler

Kohler K-13700 Bedienungsanleitung

Kohler

Kohler 1108711 Handbuch

Kohler

Kohler K-1491 Bedienungsanleitung

Kohler

Kohler PureWash K-98804 Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung

Sanela

Sanela SLVN 07 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67478W-6001 Montageanleitung

Sterling Plumbing

Sterling Plumbing C741 Bedienungsanleitung