Kohler Mira Showers Escape Thermostatic 9.0 kW Bedienungsanleitung

Mira Escape Thermostatic

9.0, 9.8 kW

These instructions must be left with the user

Installation and User uide

For SPARES, ADVICE

or REPAIRS

Please call us on

0844 571 5000

(UK Only)

Product Model Number Colour

Mira Escape 9.0 J95Hb/c Chrome, Satin/Chrome

Mira Escape 9.0 J95Hf White

Mira Escape 9.8 J95 /H Chrome, Satin/Chrome

Patents and Design Registration

Design Registration: 000373543-0003

Patents: B: 2 341 667, 2 404 000, 2 427 460,2 428 286

Ireland: 82835, 85128, 85163, 85912

Patent Applications: Ireland: 2006/0462

Recommended Usage

Domestic ü

Light Commercial ü

Heavy Commercial û

Healthcare û

INTRODUCTION

Thank you for purchasing a quality Mira product. To enjoy the full potential of your

new product, please take time to read this guide thoroughly. Having done so, keep

it handy for future reference.

The Mira Escape Thermostatic is an electric shower with separate controls for power

selection and temperature/Àow adjustment. A unique thermostatic valve stabilises

temperature changes caused by water pressure Àuctuations. These can result from

taps being turned on or off, or toilets being Àushed. Individual lights indicate “ON/

OFF” and “LOW FLOW”.

The Mira Escape comes complete with Mira Energise adjustable spray handset

with four different spray actions (start, soothe, force and eco*), Àexible hose, clamp

bracket assembly, slide bar, supports, hose retaining ring and soap dish.

* On electric showers the ‘eco’ setting will have no effect, and will give the same

spray action as the ‘start’ setting.

Mira Escape models covered by this guide:

uarantee

For domestic installations, Mira Showers guarantee the Mira Escape 9.0 kW and

9.8 kW against any defect in materials or workmanship for a period of two years

from the date of purchase (shower ¿ttings for one year).

For non-domestic installations, Mira Showers guarantee the Mira Escape 9.0 kW

and 9.8kW against any defect in materials or workmanship for a period of one year

from the date of purchase.

For terms and conditions refer to section “ Customer Services” .

If you experience any dif¿culty with the installation of your new shower, then please

refer to “ Fault Diagnosis” , before contacting Kohler Mira Limited. Our telephone

and fax numbers can be found on the back cover of this guide.

IMPORTANT SAFETY INFORMATION

WARNIN - This shower can deliver scalding temperatures if not operated,

installed or maintained in accordance with the instructions, warnings and

cautions contained in this guide and on or inside the appliance.

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

1. Installation of this shower must be carried out in accordance with these

instructions by quali¿ed, competent personnel.

2. Isolate the electrical and water supplies before commencing installation. The

electricity must be isolated at the consumer unit and the appropriate circuit

fuse removed, if applicable. Mains connections are exposed when the cover

is removed.

3. DO NOT install the shower in areas with high humidity and temperature

(i.e. Steam rooms and saunas).

4. DO NOT install the shower where it may be exposed to freezing conditions.

Ensure that any pipework that could become frozen is properly insulated.

5. DO NOT switch the shower on if there is a possibility that the water in the

shower is frozen.

6. DO NOT switch the shower on if water starts leaking from the shower case.

Isolate the electrical supply to the shower immediately.

7. DO NOT connect the outlet of the shower to any tap, control valve, trigger

handset or showerhead other than those speci¿ed for use with this shower -

scalding water temperatures and product damage will occur. Only Kohler Mira

recommended accessories should be used.

8. The water supplies to this product must be isolated if the product is not to be

used for a long period of time. If the product or pipework is at risk of freezing

during this period they should also be drained of water.

9. DO NOT perform any unspeci¿ed modi¿cations to the shower or its

accessories. When servicing only use genuine Kohler Mira replacement

parts.

10. If the shower is dismantled during installation or servicing then upon completion

the product must be inspected to ensure all electrical connections are tight and

that there are no leaks.

11. Read all installation instructions before installing this shower.

12. Upon completion of the installation, make sure that the user is familiar with the

operation of the shower, and leave this guide with the owner.

1 x Mira Escape

1 x Compression Nut

1 x Olive

3 x Case Inserts

Tick the appropriate boxes to familiarize yourself with the part names and to

con¿rm that the parts are included.

Documentation

1 x Installation and User uide 1 x Installation Template

1 x uarantee and Registration Document

PACK CONTENTS

BROWN

BROWN BROWN

BLUE

REEN

BROWN

BLACK

BLACK BLACK

RED

WIRIN DIA RAM

Thermal Cutout

Dual Disc

Tank Connection

Load

Inlet Connector

Pressure/Power

Selector Switch

Solenoid Valve

Low Flow Neon

Power On

Neon

START/STOP

Internal Wiring Diagram

European Conformity Information

The Mira Escape range of showers comply with the following European directives:

2006/95/EC Low Voltage Directive, 2004/108/EC EMC Directive.

The Mira Escape range of showers are high power appliances and are subject to

conditional connection. If the main electrical supply fuse is rated less than 80 Amps,

the local electricity supply company must be contacted to con¿rm if the electrical

supply is adequate.

The Mira Escape range of showers comply with the requirements of the UK’s

water regulations.

Dimensions

Height 348 mm

Width 207 mm

Depth 90 mm

Electrical Variant

Escape 9.0 Escape 9.8

Nominal Power at 230 V ac 8.3 kW 9.0 kW

Nominal Power at 240 V ac 9.0 kW 9.8 kW

Recommended MCB Rating 40 A 45 A

Maximum Supply Cable Size 16 mm²

Recommended RCD Rating 30 mA tripping current

Recommended Isolator Switch 45 A double-pole with 3 mm contact separation

Appliance Sealing Rating IP X4 - Suitable for installation in Zone 1

Maximum Ambient Temperature 30°C

Minimum Ambient Temperature 2°C

Plumbing Variant

Escape 9.0 Escape 9.8

Minimum Dynamic Pressure 70 kPa (0.7 bar) 70 kPa (0.7 bar)

Maximum Dynamic Pressure 500 kPa (5 bar)

Maximum Static Pressure 1000 kPa (10 bar)

Minimum Static Pressure 20 kPa (0.2 bar)

Maximum Inlet Temperature 30°C

Minimum Inlet Temperature 2°C

Inlet Connection 1/2” BSP Male / 15 mm Compression Fitting

Maximum Water Hardness 200 ppm CaCO

Outlet Connection 1/2” BSP Male

SPECIFICATIONS

INSTALLATION REQUIREMENTS

Please read the Important Safety Information and speci¿cations sections at

the front of this guide, and the requirements detailed in this section before

installing the shower.

WARNIN - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

Plumbing

1. The plumbing installation must comply with all national or local water regulations

and all relevant building regulations, or any particular regulation or practice

speci¿ed by the local water supply company.

2. Do not install the product in a position in which service access is limited.

3. Decide on a suitable position for the shower (minimum distance of 200 mm from

the ceiling to allow for cover ¿t and removal).

4. The position of the shower and shower ¿ttings must provide a minimum gap of

25 mm between the showerhead and the spill over level of any bath, shower

tray or basin and a minimum gap of 30 mm between the showerhead and the

spill over level of any toilet, bidet or other appliance with a Fluid Category 5

backÀow risk (see diagram on page 8).

5. The shower is suitable for installation within the shower area and is ¿tted with

a pressure relief valve. It must be positioned over a water catchment area with

the controls at a convenient height for the user.

6. The shower must be ¿tted to a waterproof Àat and even wall surface.

7. DO NOT ¿t the shower to the wall and tile up to the case.

8. DO NOT seal the gap between the shower and the wall surface.

9. The showerhead should be positioned so that it discharges down the centre

line of the bath or across the opening of a shower cubicle.

10. The showerhead must be directed away from the shower unit, during normal

use the showerhead must not spray directly on to the shower unit.

11. DO NOT apply excessive force to plumbing connections; always provide

mechanical support when making plumbing connections. Any soldered joints

should be made before connecting the shower.

12. This shower is not designed to be plumbed directly from the rear. For rear-entry

supply, add an elbow to the supply pipe and connect as a rising or a falling supply.

13. If pipework and/or electrical cables enter the shower from the rear through a

hole in the wall provision must be made to prevent water ingress back into the

wall structure.

14. Only use the inlet connector supplied with the shower. DO NOT use any other

type of ¿tting.

Zone of

BackÀow Risk

30 mm

Minimum

Toilet or Bidet

FC5

Hand Basin

FC3

Bath or Shower

Tray FC3

Electric

Shower

25 mm

Minimum

25 mm Minimum

15. A full bore/non restrictive servicing valve must be ¿tted in a readily accessible

position adjacent to the shower to facilitate maintenance of the shower.

DO NOT use a valve with a loose washer plate (jumper) as this can lead to a

build up of static pressure.

16. A water treatment device should be installed where the water hardness may

exceed 200 ppm. Malfunctions caused by excessive limescale formation are

not covered by this shower’s guarantee (see back page for details).

17. The installation must not cause the hose to be sharply kinked during normal use.

18. DO NOT perform the electrical installation until the plumbing has been completed

and checked for leaks.

Hose Retaining Ring ¿tted and shower ¿ttings ¿xed at a suitable height preventing

dirty water backÀow.

Note! There will be occasions when the hose retaining ring will not provide a suitable

solution for Fluid Category 3 installations, in these instances an outlet double

checkvalve must be ¿tted, this will increase the required supply pressure typically by

10kPa (0.1 bar). Double checkvalves ¿tted in the inlet supply to the appliance cause

a pressure build up, which affect the maximum static inlet pressure for the appliance

and must not be ¿tted. For Fluid Category 5 double checkvalves are not suitable.

Double-pole

Isolating Switch

Consumer Unit

Plumbing and Electrical Schematic

WARNIN - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

Electrical

1. The electrical installation must comply with BS 7671 (commonly referred to as

theIEE Wiring Regulations) and all relevant building regulations, or any particular

regulation or practice speci¿ed by the local electricity supply company.

2. Ensure that all circuit protection devices, switches and cabling is adequate

for the rated current of the shower and that the rating of the electricity supply

company fuse and the consumer unit are adequate for the additional demand.

3. The shower must be earthed. Ensure any supplementary bonding complies

with the relevant regulations.

4. This shower is intended to be permanently connected to the ¿xed electrical wiring

of the mains system. A separate supply must be provided from the consumer

unit to the shower.

5. DO NOT supply any other electrical equipment including extractor fans or pumps

via this product.

6. This shower must be provided with means for local disconnection that is

incorporated into the ¿xed wiring in accordance with the relevant local wiring

regulations. This must be a double pole switch, which has at least 3 mm contact

separation in each pole.The switch canbe a ceiling mounted pull-cord type within

the shower room or a wall mounted switch ¿tted in the applicable zone area.

7. A 30mAResidual Current Device (RCD) must be incorporated into the electrical

supply to this shower in accordance with wiring regulations.

8. DO NOT apply excessive force to the terminal block.

9. All electrical connections should be checked for tightness to prevent overheating

before switching on the electrical supply.

10. DO NOT switch on the electrical supply until the plumbing has been completed

and checked for leaks.

Warning! Turn off the electrical and water supplies before proceeding with the

installation of the Mira Escape. The electricity must be turned off at the mains

and the appropriate circuit fuse removed, if applicable.

Note! An installation template is supplied to help you install the Mira Escape.

Remove the three cover retaining

screws, the cover and the service

tunnel.

Cover

Cover Retaining

Screw

Service Tunnel

Determine the direction of the inlet

water supply: top (falling), bottom

(rising), or back inlet .

Note! Make sure that the back inlet

does not go directly back into the wall.

Use a soldered elbow.

Swivel the inlet connector assembly

to suit. Remove the inlet blanking cap.

Avoid trapping the green earth bonding

wire.

INSTALLATION

Installation of Mira Escape

Wall ¿xings are not supplied. For solid wall structures a red rawl plug and a

no. 8 x 1½” countersunk brass or stainless steel screw should be used. For

other wall structures such as panels alternative ¿xings may be required. A

minimum of 3 ¿xing screws should be used.

Andere Handbücher für Mira Showers Escape Thermostatic 9.0 kW

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kohler Sanitärprodukte Handbücher

Kohler

Kohler K-T6808 Bedienungsanleitung

Kohler

Kohler K-13700 Bedienungsanleitung

Kohler

Kohler Soleo 8690 Bedienungsanleitung

Kohler

Kohler VEIL HT100 TL IWT Bedienungsanleitung

Kohler

Kohler VOLUTE K-18669T Bedienungsanleitung

Kohler

Kohler K4915 Betriebsanleitung

Kohler

Kohler K-7322 Bedienungsanleitung

Kohler

Kohler K-2749 Series Montageanleitung

Kohler

Kohler PureWash K-98804 Bedienungsanleitung

Kohler

Kohler K-11660 Montageanleitung

Kohler

Kohler Loure K-15285 Montageanleitung

Kohler

Kohler MING K-20029T-RW1 Bedienungsanleitung

Kohler

Kohler Rada T1 Bedienungsanleitung

Kohler

Kohler ATOM 28956X-4 Bedienungsanleitung

Kohler

Kohler LUSTRA Bedienungsanleitung

Kohler

Kohler MF0002KE-00 Bedienungsanleitung

Kohler

Kohler K-2032-0 Bedienungsanleitung

Kohler

Kohler Tableau K-14293 Bedienungsanleitung

Kohler

Kohler Revival K-2950-1 Montageanleitung

Kohler

Kohler K-6132 Montageanleitung

Kohler

Kohler k-10950 Betriebsanleitung

Kohler

Kohler K-2443 Bedienungsanleitung

Kohler

Kohler 23475-4-BL Bedienungsanleitung

Kohler

Kohler CARE K-22779T-1 Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung

Sanela

Sanela SLVN 07 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67478W-6001 Montageanleitung

Sterling Plumbing

Sterling Plumbing C741 Bedienungsanleitung