Kohler K-10950 Betriebsanleitung

Maintenance Guide

Electronic Faucet

Mproduct numbers are for Mexico (i.e. K-12345M)

Los números de productos seguidos de

Mcorresponden a México (e.j.

K-12345M)

Français, page “Français-1”

Español, pagina “Español-1”

K-10950, K-10951

1025498-5-H

Thank You For Choosing Kohler Company

Thank you for choosing Kohler Company. Your Kohler Company

product reﬂects the true passion for design, craftsmanship, artistry, and

innovation Kohler Company stands for. We are conﬁdent its

dependability and beauty will surpass your highest expectations,

satisfying you for years to come.

All information in this guide is based upon the latest product

information available at the time of publication. At Kohler Company,

we strive to fulﬁll our mission of improving the level of gracious living

for each person who is touched by our products and services. We

reserve the right to make changes in product characteristics, packaging,

or availability at any time without notice.

Please take a few minutes to review this guide. Pay special attention to

the care and cleaning instructions.

Your Kohler Lavatory Faucet

Your new electronic lavatory faucet blends elegant styling and beauty

with exceptional performance and reliability. Each faucet is precision

engineered and constructed of premium quality materials to provide

trouble-free operation even under the hardest water conditions.

Your electronic faucet includes a vandal resistant aerator and an

integral vandal resistant mixing handle or plug button. The technology

employed for the activation mechanism allows ﬂawless activation of

your electronic faucet. The faucet is rated at6VDC1Wandis

powered bya6VDCbattery or an optional AC power supply.

The electronic faucet also includes a vandalism resistant mode to

protect the unit from abuse or items left in front of the sensor. If an

item is placed in range of the sensor and remains there in excess of 120

seconds, the faucet will not function. The faucet will resume

functioning when the item has been removed for a minimum of 3

seconds.

Care and Cleaning

For best results, keep the following in mind when caring for your

KOHLER product:

•Use a mild detergent such as liquid dishwashing soap and warm

water for cleaning. Do not use abrasive cleaners that may scratch

or dull the surface.

•Carefully read the cleaner product label to ensure the cleaner is

safe for use on the material.

1025498-5-H 2 Kohler Co.

Care and Cleaning (cont.)

•Always test your cleaning solution on an inconspicuous area

before applying to the entire surface.

•Do not allow cleaners to sit or soak on the surface.

•Wipe surfaces clean and rinse completely with water immediately

after cleaner application. Rinse and dry any overspray that lands

on nearby surfaces.

•Use a soft, dampened sponge or cloth. Never use an abrasive

material such as a brush or scouring pad to clean surfaces.

For detailed cleaning information and products to consider, visit

www.kohler.com/clean. To order Care & Cleaning information, call

1-800-456-4537.

Kohler Co. 3 1025498-5-H

Adjust the Water Temperature

CAUTION: Risk of personal injury. Scalding may result if

the limit stop is not reinstalled properly.

NOTE: The water temperature does not need to be adjusted if the

water temperature is below 105°F (41°C).

NOTE: Use a thermometer rated for 120°F (49°C) or greater.

NOTE: When using a tempered water supply, install the

vandal-resistant plug button.

For Handle Installations

Turn on the water and adjust to the full hot position by turning

the handle toward the back of the faucet until it stops.

Determine the temperature using a thermometer. If the

temperature exceeds 105°F (41°C), complete the following steps.

Turn the handle until vertical.

Attach the cleaning strap over the sensor.

Remove the handle screw using the supplied 2.5 mm hex wrench.

Remove the handle and the limit stop.

Remove the limit stop from the handle splines.

Limit

Stop

Handle

Cleaning

Strap

Screw

Handle

Housing Setscrew

Right Tab

Stop

Vandal-Resistant

Plug Button

Limit

Stop

Tab Edge

1025498-5-H 4 Kohler Co.

Adjust the Water Temperature (cont.)

Rotate and reposition the limit stop on the handle splines.

Rotating the limit stop clockwise toward the back of the faucet

will decrease the maximum temperature limit. Each spline

represents approximately 10°F (5°C) change in temperature.

Reinstall the handle vertically with the limit stop in place. Do not

secure the handle with the screw at this time.

Turn the handle to full hot and check the water temperature.

Repeat the above procedures until the desired temperature is

reached.

Secure the handle assembly with the screw.

Remove the cleaning strap and turn on the water.

For Vandal-Resistant Installations

NOTE: If you install the vandal-resistant plug button, save the limit

stop and handle to adjust the water temperature at a later date.

Using the handle, adjust the water to the desired temperature.

Remove the handle screw using the supplied 2.5 mm hex wrench.

Position the vandal-resistant plug button and ﬁrmly press into

place.

Kohler Co. 5 1025498-5-H

Disassemble the Faucet

Perform this step when prompted by text in the following sections.

Turn off the water supply to the faucet.

If applicable, disconnect the AC power supply.

Remove the housing setscrew from the back of the faucet housing

using the supplied 2.5 mm hex wrench.

If applicable, remove the handle. Use the provided 2.5 mm hex

wrench to remove the handle screw.

Handle

Limit

Stop

Handle

Screw

Housing

Setscrew

1025498-5-H 6 Kohler Co.

Service the Battery

CAUTION: Risk of product damage. Separate the connectors

by pulling gently while holding onto each connector. Do not

pull apart by the wires.

Perform the steps in the ″Disassemble the Faucet″section.

Pull up on the spout to separate it from the valve.

Disconnect the battery connectors by pulling gently on both

connectors.

Reach inside the faucet body and gently pull the end of the

battery clip up until it comes free from the two tabs.

Pull the battery and battery clip out of the faucet body.

Remove the battery from the battery clip.

Install a new battery into the battery clip.

If the sensor clip comes out with the battery clip, reinstall it

according to the steps in the ″Replace the Sensor ″section.

Continue to the ″Reinstall the Battery Clip - DC Models Only″

section.

Sensor

Valve

Battery

Battery Clip

Connector Connector

Position 1

Connector

Position 2

Kohler Co. 7 1025498-5-H

Service the Battery (cont.)

Reinstall the battery clip inside the faucet body.

NOTE: ″Connector Position 1″is the preferred installation location

for the connectors. ″Connector Position 2″may also be used as an

alternate installation location. Refer to the above illustration.

Position the connector tight to the battery clip in connector

position 1 (DC models have one connector).

Slide the faucet spout over the valve assembly. It is important

that the front of the spout line up with the pin at the bottom

front of the valve assembly.

IMPORTANT! Verify that all the wires are inside the faucet body

and are not pinched.

Convert to Tempered Water

To provide tempered water only, use a wrench to remove the

hose for the hot water after ﬁrst turning off the water supply to

the faucet.

Replace the hose with the plug supplied and securely wrench

tighten.

If applicable, install the vandal-resistant plug button. Refer to the

″Disassemble the Faucet″section to remove the handle.

Turn on the water supply to the faucet and check for leaks.

1025498-5-H 8 Kohler Co.

Replace the Sensor

CAUTION: Risk of product damage. Do not disconnect the

connectors by pulling on the wires.

Carefully disconnect the wires by pulling gently on the

connectors.

Pull the loop outward to disengage the clip from the groove.

Rotate the clip counterclockwise.

Remove the old sensor.

Attach the new sensor wires to the connectors.

Install the sensor in the faucet, wire side ﬁrst.

Align the sensor eyes with the holes in the spout.

Place the straight end of the clip into the hole in the retaining

wall of the spout.

Pull the clip out until the bend in the clip is resting at the

entrance to the groove. Avoid pinching the wires between the

sensor and clip.

Push the clip in until it is ﬁrmly seated in the groove.

Sensor Clip

Sensor

Battery Clip

Installation Battery Clip

Installed

Connector

Position 1

Connector

Position 2

Kohler Co. 9 1025498-5-H

Replace the Sensor (cont.)

If applicable, see the ″Reinstall the Battery Clip - DC Models

Only″section to reinstall the battery and battery clip.

Proceed to the ″Reassemble the Faucet″section.

1025498-5-H 10 Kohler Co.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Kohler Sanitärprodukte Handbücher

Kohler

Kohler K-3593 Bedienungsanleitung

Kohler

Kohler K-7401 Montageanleitung

Kohler

Kohler K-15888 Bedienungsanleitung

Kohler

Kohler K-8549 Bedienungsanleitung

Kohler

Kohler Coralais K-15186 Montageanleitung

Kohler

Kohler K-18865 Bedienungsanleitung

Kohler

Kohler Devonshire 193-4-2BZ Bedienungsanleitung

Kohler

Kohler K-10217 Bedienungsanleitung

Kohler

Kohler PURIST UPGRADE K-99168T Bedienungsanleitung

Kohler

Kohler K-702-N1 Bedienungsanleitung

Kohler

Kohler K-7344 Montageanleitung

Kohler

Kohler 10742A-CP Bedienungsanleitung

Kohler

Kohler OnCue Plus RDC Bedienungsanleitung

Kohler

Kohler mira Bijou Bedienungsanleitung

Kohler

Kohler K-669 Montageanleitung

Kohler

Kohler Mira Sport J03A Bedienungsanleitung

Kohler

Kohler 1071003-2-B Bedienungsanleitung

Kohler

Kohler K-997 Bedienungsanleitung

Kohler

Kohler K-7179 Montageanleitung

Kohler

Kohler ECO 72685T-B7 Bedienungsanleitung

Kohler

Kohler 99859T Bedienungsanleitung

Kohler

Kohler K-75449-BV Bedienungsanleitung

Kohler

Kohler K-10577 Montageanleitung

Kohler

Kohler K-1002-H2 Montageanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung

Sanela

Sanela SLVN 07 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67478W-6001 Montageanleitung

Sterling Plumbing

Sterling Plumbing C741 Bedienungsanleitung

Kohler k-10950 Betriebsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken