Kohler User Manual K-23188T-NS Bedienungsanleitung

FAMILY CARE

INSTALLATION INSTRUCTIONS

3.0/4.5L VITREOUS CHINA ONE PIECE TOILET

3.0/4.5

S-TRAP 305mm K-23188T-NS

S-TRAP 400mm K-23189T-NS

Please read these instructions carefully to familiarize

yourself with the required tools, materials, and installation

sequences. Follow the sections that pertain to your

particular installation. This will help you avoid costly

mistakes. In addition to proper installation, read all

operating and safety instructions.

All information in these instructions is based upon the

latest product information available at the time of

publication. Kohler China reserves the right to make

changes in product characteristics, packaging, or

availability at any time without notice.

These instructions contain important care, cleaning, and

warranty information -

please leave instructions for the

consumer

·-

ORDERING INFORMATION

Family Care Skirted 1PC 305mm W/O Seat.......K-23188T-NS

Family Care Skirted 1PC 400mm W/O Seat.......K-23189T-NS

Recommended Toilet Seat:

Family Care QC Seat ................................................K-23204T

Family Care Furefresh QC Seat................................K-23205T

305mm( ) ...........K-23188T-NS

400mm( ) ...........K-23189T-NS

.......................................K-23204T

( )..........................K-23205T

-1-

2019

No.2 KOHLER ROAD, SANSHUI CENTRAL INDUSTRIAL PARK, LEPING TOWN, SANSHUI DIST., FOSHAN, GUANGDONG, PRC POST CODE 528137

2 528137

8# MENGSHAN RD, ECONOMIC DEVELOPMENT ZONE OF HUANTAI, ZIBO, SHANDONG, CHINA 256410

8 256410

NO.1 KOHLER STREET, ECONOMIC DEVELOPMENT ZONE OF FAKU COUNTY, SHENYANG LIAONING PROVINCE, PRC 110400

1 110400

POST CODE:

NOTES

Observe all local plumbing and building codes.

Shut off the water supply.

Seat post holes are on 140mm centers.

Ensure that the new drain has the correct roughing-in

dimension. This toilet has a 305/400mm roughing-in

dimension. .

Closet flange must be 305/400mm on-center from wall.

Carefully inspect the new fixture for any sign of damage.

For new construction, refer to the dimensions in

for locating the shut-off valve.

See Roughing-in

installation step

140mm

305/400mm( )

305/400mm

Fixture dimensions are nominal and conform to tolerances

established by ASME Standards (A112.19.2-2018).

This product complies with Q/KCI-006-2018 and GB

25502-2017. Water Efficiency Grade 1.

ASME (A112.19.2-

2018)

Q/KCI-006-2018 GB 25502-2017

1392769-T01-A

-2-

TOOLS AND MATERIALS REQUIRED

(Not supplied)

254mm (10") adjustable wrench

305mm (12") pipe wrench

Metal file (file cut)

Tape measure

Tubing cutter

Level

Hacksaw

Putty knife

Screwdriver

Toilet gasket (wax seal)

Toilet T-bolts (2), 8mm (5/16") diameter

Toilet supply shut-off valve, 10mm(3/8 ) recommended

If the existing toilet does not have a supply shut-off

valve below the tank, install one before installing the new

toilet.

The flexible hose needed is supplied. The stop valve and wax

ring are not supplied.

NOTICE:

254mm

305mm

60cm

8mm T 2

10mm

WARNING: Risk of personal injury or product

damage

WARNING: Risk of external leakage

: Handle vitreous china products very carefully.

Vitreous china can break and chip if you overtighten

bolts and nuts.

. The fill valve

nut has been factory-tightened to design specifications.

If re-tightening is required, wrench tighten one turn

past finger tight .

Unit: mm

Reference Value

K-23188T-NS

FRONT OF BOWL

Finished Wall

Supply

229

200

395

OF OUTLET

305

700

378

748

299

286

1392769-T01-A

-3-

TO REMOVE EXISTING TOILET

Turn off the water supply. Flush the toilet, and use a sponge

to remove the remaining water from the tank and bowl.

Disconnect the supply shut-off valve (if present), and remove

the old tank and bowl.

()

Fig.#1

INSTALLATION

K-23189T-NS

Kohler reserves the right to change marked dimensions without prior notice.

Fig.#2

Remove the old gasket from the floor

and the closet flange with a putty knife.

Remove the old T-bolts and discard

them.

if the new toilet is not

installed immediately, temporarily stuff

a rag into the closet flange.

NOTICE:

NOTICE: Do not use white cement or high lime content

cements to install this toilet. The expansion of cement due to

a rise in temperature may make the toilet crack or cause

damage. Kohler is not responsible for any damage caused by

installation with the use of cement.

Closet Flange

67mm;

229mm 200mm

Fig.#3

TO INSTALL SUPPLY

SHUT-OFF VALVE

Install the supply shut-off valve so it is

229mm above the finished floor line,

and 200mm to the left of the closet

flange centerline.

The centerline of the supply shut-off

valve outlet should extend 67mm from

the finished wall. Install the supply

shut-off valve with the outlet vertical.

Supply Shut-Off Valve

Closet Flange

Centerline

200

305/400

229

OF OUTLET

FRONT OF BOWL

Finished Wall

Supply

400

229

200

395

748

204

382

700

378

1392769-T01-A

-4-

10mm

TO INSTALL BOWL

Position the template and align with

drain hole.

Mark down the position of foot and 5

holes.

Drill holes on ground with the drill of

10mm (3/8"), then insert anchor to

holes.

CAUTION: Please make sure there is

no water pipe or spool under the 5

holes to be drilled.

Fig.#7

Firmly press the toilet gasket onto the

toilet outlet of plastic trap.

Wax ring type toilet gasket

should not be installed at temperatures

less than 21 C.

If you are using a toilet

gasket with an integral plastic sleeve,

make sure the gasket is positioned

with the sleeve facing away from the

toilet.

NOTE 1:

NOTE 2:

Install brackets.

Plastic Trap Outlet

Toilet Gasket

Fig.#8

Install plastic to ground and mounted

with 3 set of bolts firmly.(not supplied)

)

NOTE: Must use the toilet installation

gasket ring (not supplied) to seal the

area where the waste pipe contacts

the construction section to avoid

leakage.

(

)

Fig.#4

Fig.#5

Drain Hole

3/8

10mm

Fig.#6

1392769-T01-A

Thread the supply hose onto the fill

valve shank.

Fig.#9

Slide nut of inlet cover onto the supply

hose, with flared end last and run hose

through toilet wall.

Fig.#10

Take hose guide apart and slide onto

the supply hose, with the flared end

last. Slide the two inserts into the

flared end of the hose guide. Insert

into toilet wall and tighten nut.

Fig.#11

Hose Guide

Fig.#12

Carefully align and lower the bowl.

Apply weight to the bowl rim to let the

outlet insert into plastic trap.

Outlet

Plastic Trap

-5-

1392769-T01-A

-6-

Fig.#13

Carefully thread the screws into the

brackets, until toilet is secure.

Alternately tighten left and right sides

to prevent pulling the toilet off center.

Install cap to cover screw.

Do not overtighten.

Cap Screw

Bushing

Fig.#14

Apply caulk around base.

TO CONNECT WATER

SUPPLY

* Flexible hose are recommended to

connect the supply line to the fill valve.

If you use a rigid connection (not

provided), take care not to apply side

forces to the bottom of the fill valve. Be

sure the rigid connection must be fit

with supply line completely to prevent

damage shank by forced connection.

(

)

Supply Shank*

Supply Shut-Off Valve

Fig.#15

IMPORTANT:

Make certain the top is turned to the locked

position. Valve may not turn on if top is not fully in the

locked position.

Before turning on the supply valve for the first

time, follow the steps below to clear sand, debris and rust

from the system:

Make sure water sure water supply is off. Remove valve END

by rotating it 1/8 turn counterclockwise.

While holding a container over the uncapped VALVE to

prevent splashing, turn water supply on and off a few times.

Leave water supply off.

Replace END by engaging lugs and rotating 1/8 turn

clockwise.

Turn on water supply. Check that water level is at the marked

water line.

1/8

1392769-T01-A

Install the toilet seat according to the

seat manufacturer's installation

instructions.

Connect the push button and flush

valve.

Fig.#16

Fig.#17

-7-

FILL VALVE ADJUSTMENT

Fill float with ballast

Adjust the cam clockwise or counter-

clockwise until the water level is at the

marked water line.

Test flush the toilet.

Check all connections for leakage for

several days.

Set the tank cover in place on the tank.

PUSH BUTTON INSTALLATION

NOTE: Remove the package and screw out the nut. Make the

button through the tank cover as shown. Be noted that the

button shall be kept level. Arrange big and small flush buttons

according to the label of water consumption on the tank.

Tighten the nut from beneath the tank cover.

Fig.#18

1392769-T01-A

TANK COVER INSTALLATION

Note: Press down the spring and insert the button into the

installation position on the tank cover. Release the spring to

lock it. Be noted not to let the steel wire of the flush valve

resting on the lever of the fill valve.

Fig.#19

-8-

SYMPTOMS CORRECTIVE ACTION

1. Poor Flush A. Adjust the tank water level to match the waterline.

B. Fully open the water supply shut-off valve.

C. Clear obstructions from the trapway, jet, or bowl rim holes.

D. Clear obstructions from the waste line.

A. Adjust the chain for proper slack so the seal is not held off the flush valve seat.

B. Clean or replace the seal if it is worn, dirty, or misaligned with the flush valve seat, or

if the flush valve seat is damaged. Replace the flush valve seal or flush valve.

C. Clean the fill valve seat/seat washer of debris, or replace the piston/seat washer

assembly.

D. Remove the tank and tighten the flush valve nut if flush valve gasket is leaking. Do

not overtighten. If leakage continues, replace the gasket.

E. Adjust the tank water level if it is too high.

2. No Flush

IMPORTANT: Use only genuine Kohler parts as shown to avoid property damage.

4. Tank takes excessive time to fill.

5. There is excessive noise when the

tank is filling.

3. The fill valve turns on/off by itself

without the toilet being flushed, or it

runs allowing water to enter the tank.

A. Reconnect the chain to the trip lever or flush valve.

B. Adjust the chain assembly to remove excessive slack.

A. Fully open the water supply shut-off valve.

B. Clean the valve inlet, valve head, or supply line. Flush the lines.

A. Partially close the water supply shut-off valve if the water pressure to the toilet is too

high. Check the toilet performance following any such adjustment.

B. Remove dirt or obstructions from the valve head. Flush the lines.

Spring

1392769-T01-A

-9-

1. A.

C. /

3. /

()

CONSUMER RESPONSIBILITIES

If you live in a hard water area, make certain that the holes in

the toilet rim are kept clean to ensure proper bowl flushing.

Toilet bowl cleaners should be used at least once a week.

Use a long-handled brush to clean the rim holes, and to clean

as far into the trap as possible to prevent mineral deposits

from forming.

Most toilet bowl cleaners are not harmful to the vitreous china

surface of the toilet bowl. Please follow the bowl cleaner

manufacturer's instructions carefully.

Do not use abrasive cleaners or solvents.

Do not use in-tank cleaners. Products containing

chlorine (calcium hypochlorite) can seriously damage

fittings in the tank. This damage can cause leakage

and property damage.

Kohler Company shall not be responsible or liable for any

damage to these tank fittings caused by the use of cleaners

containing chlorine (calcium hypochlorite).

WARNING: Risk of property or product damage.

Please do not use hard materials (like

scouring pad) to clean product surface, especially the

product logo.

CAUTION:

CAUTION: Don t use any cement while installing

the toilet.

WARNING: Risk of product damage.

Heat expansion of the toilet may damage

the feet of the toilet. Kohler will not be responsible for

any damage because of using cement.

Do not throw into the toilet what is easy to block it,

such as newspaper, paper pilch, sanitary towel.

Do not bump the vitreous china with great force to

prevent it from damaging and leaking.

Do not use the product in the water below 0 C.

1392769-T01-A

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kohler Toilette Handbücher

Kohler

Kohler Veil K-5402T Bedienungsanleitung

Kohler

Kohler Persuade Circ K-3753 Benutzerhandbuch

Kohler

Kohler K-6299 Montageanleitung

Kohler

Kohler VEIL S-TRAP K-1381T-SLMU Bedienungsanleitung

Kohler

Kohler K-3998M Montageanleitung

Kohler

Kohler K-5401TW-2-0 Bedienungsanleitung

Kohler

Kohler Escale K-25089T-S Bedienungsanleitung

Kohler

Kohler K-5401KR Bedienungsanleitung

Kohler

Kohler OVE Series Bedienungsanleitung

Kohler

Kohler REVE K-24766T-S Bedienungsanleitung

Kohler

Kohler K-3423 Bedienungsanleitung

Kohler

Kohler Novita K-BN330S-N0 Bedienungsanleitung

Kohler

Kohler K-31333TW-0 Bedienungsanleitung

Kohler

Kohler K-3488 Montageanleitung

Kohler

Kohler REACH COMPACT K-29216T-NS Bedienungsanleitung

Kohler

Kohler K-4026T Bedienungsanleitung

Kohler

Kohler K-8297KR-HC-0 Bedienungsanleitung

Kohler

Kohler Innate K-8340TW-2EXSG-0 Montageanleitung

Kohler

Kohler REVE K-20766T-S Bedienungsanleitung

Kohler

Kohler FLEUR WATERGUARD K-3417 AA Series Bedienungsanleitung

Kohler

Kohler Inodoro K-3517 Montageanleitung

Kohler

Kohler OVE K-24719T-S2 Bedienungsanleitung

Kohler

Kohler K-4744 Montageanleitung

Kohler

Kohler K-3357 Bedienungsanleitung

Beliebte Toilette Handbücher anderer Marken

Toto

Toto Washlet TCF4911 Series Bedienungsanleitung

Grohe

Grohe Sensia ARENA Bedienungsanleitung

Geberit

Geberit AQUACLEAN MERA CLASSIC Bedienungsanleitung

Better Bathrooms

Better Bathrooms BUN/BeBa 27555/78725 Bedienungsanleitung

American Standard

American Standard CONCEPT Cube TF-2704 Bedienungsanleitung

BIOLAN

BIOLAN ECO Stücklistenhandbuch

Thetford

Thetford C260 Series Bedienungsanleitung

KELISS

KELISS T162A Series Bedienungsanleitung

BIOLAN

BIOLAN GARDEN TOILET Stücklistenhandbuch

washloo

washloo Prestige Bedienungsanleitung

JABSCO

JABSCO 37010 Series Bedienungsanleitung

Olympia

Olympia EPOQUE 69209 Bedienungsanleitung

DENCK

DENCK PURE-D Bedienungsanleitung

Silent Venus

Silent Venus SVP600 Wartungs- und Serviceanleitung

InBe

InBe IB/04.06050 Bedienungsanleitung

Swiss Madison

Swiss Madison Carré SM-1T264 Bedienungsanleitung

agape

agape PEAR 2 Bedienungsanleitung

Roca

Roca DAMA SENSO COMPACT Bedienungsanleitung