Konica Minolta AccurioPress C14000 Bedienungsanleitung
Table of Contents
1
2
3
4
5
6
7
Quick Guide
Confirmation of Product
Configuration
Name of Each Component
and Control Panel
Power-On/Off
Paper Feed Route and
Paper Jam Processing
Replenishment and
Replacement of Consumables
Cleaning
Usage Environment and
Machine Specifications
Basic Operations
Ver. 01.00
-QG No. 01 -
1Confirmation of Product Configuration
2
1-1. Introduction of Names and Functions of Machines and Options (Including the
Controller)
This chapter explains the configuration and simple functions of the installed
devices.
Paper output system options
□Relay Unit [RU-518m]
□Intelligent Quality Optimizer [IQ-501]
□Relay Unit [RU-702]
□Auto Inspection Unit [UK-301]
□Banner Output Tray Unit [MK-761]
□FoldingUnit [FD-503]
□Trimmer Unit [TU-510]
┗ □ Job Separator [JS-507]
┗ □ Creaser Unit [CR-102/CR-103]
┗ □ Trimmer Unit [TU-504]
┗ □ Perforation Unit [PE-101/PE-102]
┗ □ Banner Unit [MK-764]
┗ □ Dust Box [MK-765]
□Large Capacity Stacker [LS-507]
□Saddle Stitcher [SD-513]
┗ □ Folding Unit [FD-504]
┗ □ Creaser Unit [CR-101]
┗ □ Trimmer Unit [TU-503]
□SaddleStitcher [SD-506]
□Perfect Binder [PB-503]
□Output Tray [OT-512]
□Finisher [FS-541]
┗ □ Saddle Stitcher [SD-510]
┗ □ Punch Unit [PK-525]
┗ □ PostInserter [PI-502]
1Confirmation of Product Configuration
3
Machin
e
Control Panel
Machine
□
C14000
□
C12000
Paper feed system options
□
Paper Feeder Unit [PF-713]
□
Paper Feeder Unit [PF-712]
□
Paper Feeder Unit [PF-812]
□
Banner Paper Tray Unit [MK-760]
□
Multi Bypass Tray [MB-511]
□
Dehumidifier Heater [HT-506]
□
Feed Adjuster [FA-505]
Controller system options
□Image Controller [IC-610]
□Image Controller [IC-318]
Other options
□
Intelligent Media Sensor [IM-101]
* The photo below shows an example of the product configuration
(combination of options).
* Some options are not listed.
2Name of Each Component and Control Panel
4
2-2. Control Panel of Machine
●Power Save
Press this button to
manually set or reset Power
Save mode.
●Brightness adjustment
dial
Turn this dial to adjust the
brightness of the touch
panel.
●Utility/Counter
Press this button to display
the Utility screen and
counters. ●Start
Lights up blue when operation is possible, and
orange when operation cannot be started.
●Reset
Press this button to
return the setting
value to the default.
●Power LED
Lights up orange when
the main power switch
is turned on, then turns
blue when the sub
power switch is turned
on.
●Data LED
Flashes while the
system is receiving
print data.
●Stop
Press this button to pause
output or interrupt any
machine operation.
2-1. Name of Each Machine Component
Sub power switch
Main power switch
Front door
Toner bottle
Fusing Conveyance
Unit
2Name of Each Component and Control Panel
5
2-3. Control Panel of Option
For details about how to use the control panel of each option, view the video.
[LS-507]
[PI-502]
[FD-503]
●Start/Stop button
●Start/Stop button
●Finishing Options button
●Finishing Options button
01-030
FD-503 operation button
01-010
LS-507 operation button
01-020
PI-502 operation button
●Storage button (Output Tray)
●Eject button (Paper in stacker tray)
3Power-On/Off
6
3-1. Machine
This system has 2 power switches, main power switch and sub power switch.
Be careful of the order of turning these 2 power switches on and off.
Power-On
Main power ON
Power LED: Turned off =>
Orange
Sub Power ON
Power LED: Orange =>
Blue
Sub Power OFF
Power LED: Blue => Orange
"Please wait"*
* If the following messages are displayed, do not turn the main power off.
“Cooling in progress Power is turned off automatically"
“Power off in progress Please do not turn the main power off"
Power LED: Orange =>
Turned off.
The control panel becomes
dark.
Main power OFF
Approx. 8minutes
"Please wait for"
"Confirming scanner
connection" *1
Po
wer
-
off
Power-Off
3Power-On/Off
7
"Please wait"
" Now adjusting"
"Machine is warming up"
"Please wait for a while"
"Ready to print"
*1: The displayed message varies depending on the option you are using.
•It is recommended to leave the main power ON except when the machine will not be used
for a long period of time due to the length of time from power on to print.
•If you want to turn the power on immediately after turning the main power off, be sure to
wait at least 10 seconds before turning the power on.
•If you set the Power Save function and weekly timer, you can automatically manage the sub
power ON/OFF operation and reduce power consumption. For details, refer to the HTML
User's Guide.
•Power ON/OFF setting image of this system in line with business hours
•Job output during power save
If you input a job from the printer driver while the Power Save function is set and the
power consumption is suppressed, this system recognizes the job, cancels Power Save
mode, and begins output.
Tips
A: Monday to Friday:
ON at 9 am, OFF for lunch break
/ ON at 1 pm, OFF at 6 pm
B: Saturday:
ON at 9 am, OFF at 3 pm
C: Sunday: All day OFF
3Power-On/Off
8
3-2. KM Controller Power-ON/OFF (IC-610)
Turn the power on/off in the following order.
The controller is
mounted on the back of
the machine.
3-3. Fiery Controller Power-ON (IC-318/319)
1. Turn on the main power (rear: enclosed by a red frame).
2. Turn on the Power button (side of the LCD panel: marked by a
red circle).
•The main power can normally be left "ON".
•If you do not use the product for a long period of
time (for example, 1 or more weeks), turn off the
main power.
No.
Button name Overview
1Shutdown system Turns the controller off. (Both the Fiery system and the Windows
server (OS) are turned off.)
2Reboot system Reboots only the Fiery system. The Windows server (OS) does not
reboot.
3Restart server Reboots both the Fiery system and Windows server.
4Brightness Allows you to change the screen brightness.
5Restart display Reboots only the display.
5 buttons are displayed. For an explanation of
each button, refer to the table below.
* The displayed contents vary depending on
the version.
3-4. Fiery Controller Power-OFF (Shutdown system) (IC-318/319)
Turn the power on in the following order.
•For information about how to turn the machine on, refer to
"3-1. Machine".
•When the message "Ready to print" is displayed on the
control panel, turn the power on.
•After the machine has completely turned off, turn the
controller off.
1. Turn the machine on or off.
2. Turn the controller on or off.
1. Touch the upper right corner of the
LCD panel. The power-related window
is displayed.
2. Press [Shutdown system].
3Power-On/Off
9
3-5. Recommended Useful Functions
This system provides useful functions related to the power supply and job output of
the KM and Fiery controllers.
Name Description KM Fiery
Machine/controller
power
synchronization
setting
Set whether to synchronize the power supply
of the machine with that of the image
controller.
*1 *2
Next day
continuation
setting
When the sub power of this system is turned
off, a job in progress or a job reserved for
output is held, and executed continuously at
the next startup.
*1 -
*1: Can be set from Administrator Setting. For details, refer to the HTML User's Guide.
*2: Can be set from Command WorkStation -Configure.
•For information about how to turn the machine on,
refer to "3-1. Machine".
•The UK-301 power supply is mounted on the back
of the IQ-501.
1. Turn the main power switch and sub power switch on.
2. Turn the UK-301 on.
3-6. Option
In addition to the controller, the UK-301 is an option that requires power-on/off.
Turn the UK-301 on in the following order.
* This option is synchronized with the sub power switch of the machine, so normally,
you do not need to turn it off.
: Functions are provided.
4Paper Feed Route and Paper Jam Processing
10
4-1. Paper Feed Route in the Machine
4-2. How to See the Paper Jam Display
•If a paper jam occurs while printing or copying, the message [Paper JAM] and the
paper jam location are displayed on the control panel (screen).
•Follow the on-screen instructions to clear the paper jam.
[JAM Position] screen: Example
Output Tray
Output Tray
Output Tray
* The product configuration (combination of options) is an example.
1.
3.
2.
4. 5.
[Illustration] screen:
Example
1. Message display area
Displays the concrete method to clear
paper jams.
2. Jam number/work procedure
illustration display area
Displays the paper jam location, the
work procedure, and others.
3. [Illustration]
Press this key to display the screen that
illustrates how to process with the
highest priority.
4. [Next]
Press this key to see the next page of
the paper jam clearing procedure.
5. [JAM Position]
Press this key to return to the [JAM
Position] screen.
Purge Tray
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Konica Minolta Drucker Handbücher
Konica Minolta
Konica Minolta bizhub C3120i Bedienungsanleitung
Konica Minolta
Konica Minolta BIZHUB PRO C6500 Bedienungsanleitung
Konica Minolta
Konica Minolta PagePro 1300W Konfigurationshandbuch
Konica Minolta
Konica Minolta 1216 Bedienungsanleitung
Konica Minolta
Konica Minolta bizhub 40p Bedienungsanleitung
Konica Minolta
Konica Minolta Magicolor 7300 Bedienungsanleitung
Konica Minolta
Konica Minolta magicolor 1650EN Originalbetriebsanleitung
Konica Minolta
Konica Minolta Network Printer Bedienungsanleitung
Konica Minolta
Konica Minolta Magicolor 4650 Bedienungsanleitung
Konica Minolta
Konica Minolta bizhub 4422 Bedienungsanleitung
Konica Minolta
Konica Minolta PagePro 1350E Bedienungsanleitung
Konica Minolta
Konica Minolta BIZHUB 226 Bedienungsanleitung
Konica Minolta
Konica Minolta magicolor 8650DN Bedienungsanleitung
Konica Minolta
Konica Minolta PagePro 1350EN Bedienungsanleitung
Konica Minolta
Konica Minolta bizhub 20P Bedienungsanleitung
Konica Minolta
Konica Minolta bizhub 3301P Bedienungsanleitung
Konica Minolta
Konica Minolta magicolor 1600W Bedienungsanleitung
Konica Minolta
Konica Minolta bizhub pro 1200P Bedienungsanleitung
Konica Minolta
Konica Minolta KIP 7700 Bedienungsanleitung
Konica Minolta
Konica Minolta bizhub C287 Bedienungsanleitung
