Konica Minolta AccurioPress C7100 Bedienungsanleitung

Table of Contents

Quick Guide

Basic Operations

Ver. 01.00

- QG No. 01 -

Confirmation of Product

Configuration

Name of Each Component

and Control Panel

Power-On/Off

Paper Feed Route and

Paper Jam Processing

Replenishment and

Replacement of Consumables

Cleaning

Usage Environment and

Machine Specifications

C7100 / C7090

1Confirmation of Product Configuration

□

Relay Unit [RU-518m]

□

Humidifier [HM-103]

□

Intelligent Quality Optimizer [IQ-501]

□

Auto Inspection Unit [UK-301]

□

Relay Unit [RU-702]

□

Relay Unit [RU-510]

□

Banner Output Tray Unit [MK-761]

□

Folding Unit [FD-503]

□

Trimmer Unit [TU-510]

┗ □ Job Separator [JS-507]

┗ □ Creaser Unit [CR-102/CR-103]

┗ □ Trimmer Unit [TU-504]

┗ □ Perforation Unit [PE-101/PE-102]

┗ □ Banner Unit [MK-764]

┗ □ Dust Box [MK-765]

□

Large Capacity Stacker [LS-507]

□

Saddle Stitcher [SD-513]

┗ □ Folding Unit [FD-504]

┗ □ Creaser Unit [CR-101]

┗ □ Trimmer Unit [TU-503]

□

Saddle Stitcher [SD-506]

□

Perfect Binder [PB-503]

□

Finisher [FS-532/FS-541]

┗ □ Saddle Stitcher [SD-510]

┗ □ Punch Unit [PK-525]

┗ □ Post Inserter [PI-502]

□

Output Tray [OT-512]

□

Output Tray [OT-511]

❖Paper output system options

1-1. Introduction of Names and Functions of Machines and Options (Including the

Controller)

This chapter explains the configuration and simple functions of the installed devices.

1Confirmation of Product Configuration

本体

Control Panel

❖Machine

□

C7100

□

C7090

❖Paper feed system options

□

Paper Feeder Unit [PF-712]

□

Paper Feeder Unit with scanner and ADF [PF-713]

□

Large Capacity 3-stage Paper Feed Unit [PF-812]

□

Multi Bypass Tray [MB-510/MB-511]

□

Large Capacity Unit [LU-208/LU-208XL]

□

Banner Paper Tray Unit [MK-760]

□

Dehumidifier Heater [HT-506/HT-511/HT-515/HT-518]

□

Feed Adjuster [FA-505]

❖Controller system options

□

Image Controller [IC-609]

□

Image Controller [IC-318L/IC-319/IC-316]

❖Other options

□

Intelligent Media Sensor [IM-101]

□

Authentication Unit [AU-201S]

□

Status indicator light [MK-744C]

*For other options, please refer to the User's Guide.

* The product configuration (combination of options) is an example.

2Name of Each Component and Control Panel

2-1. Name of Each Machine Component

Front door

Main power switch

Toner bottle

Sub power switch

Fusing Conveyance

Unit

2-2. Control Panel of Machine

●Power Save

Press this button to

manually set or reset Power

Save mode.

●Brightness adjustment

dial

Turn this dial to adjust the

brightness of the touch

panel.

●Utility/Counter

Press this button to display

the Utility screen and

counters. ●Start

Lights up blue when operation is possible, and

orange when operation cannot be started.

●Reset

Press this button to

return the setting

value to the default.

●Power LED

Lights up orange when

the main power switch

is turned on, then turns

blue when the sub

power switch is turned

on.

●Data LED

Flashes while the

system is receiving

print data.

●Stop

Press this button to pause

output or interrupt any

machine operation.

2Name of Each Component and Control Panel

［PI-502］

2-3. Control Panel of Option

For details about how to use the control panel of each option, view the video.

●Start/Stop button

●Function selection button

[LS-507]

LS-507 operation button

●Storage button (Output Tray)

●Eject button (Paper in stacker tray)

PI-502 operation button

[FD-503]

●Start/Stop button

●Finishing Options button

FD-503 operation button

3Power-On/Off

3-1. Machine

This system has 2 power switches, namely, main power switch and sub power switch.

Be careful of the order of turning these 2 power switches on and off.

Approx. 6 minutes and 30 seconds

Power-On

Power-Off

Main power ON

Power LED: Turned off =>

Orange

Sub Power ON

Power LED: Orange =>

Blue

"Please wait"

"Confirming scanner

connection" *1

Sub Power OFF

Power LED: Blue => Orange

"Please wait for a while"* Power LED: Orange =>

Turned off.

The control panel becomes

dark.

Main power OFF

* If the following messages are displayed, do not turn the main power off.

"Cooling in progress Power is turned off automatically"

"Power off in progress Please do not turn the main power off"

3Power-On/Off

"Please wait"

"Now adjusting"

"Machine is warming up"

"Please wait for a while"

"Ready to print"

*1: The displayed message varies depending on the option you are using.

•It takes a certain amount of time from when the main power is turned on until it is ready

for printing.

Therefore, it is recommended to leave the main power ON except when the machine will

not be used for a long period of time.

•If you want to turn the power on immediately after turning the main power off, be sure to

wait at least 10 seconds before turning the power on.

•If you set the Power Save function and weekly timer, you can automatically manage the sub

power ON/OFF operation and reduce power consumption. For details, refer to the User's

Guide.

•Power ON/OFF setting image of this system in line with business hours

•Job output during power save

If you input a job from the printer driver while the Power Save function is set and the

power consumption is suppressed, this system recognizes the job, cancels Power Save

mode, and begins output.

Tips

A: Monday to Friday:

ON at 9 am, OFF for lunch break

/ ON at 1 pm, OFF at 6 pm

B: Saturday:

ON at 9 am, OFF at 3 pm

C: Sunday: All day OFF

3Power-On/Off

3-2. KM Controller Power-ON/OFF

Turn the power on/off in the following order.

1. Turn the machine on or off.

2. Turn the controller on or off.

•For information about how to turn the machine on, refer to

"3-1. Machine".

•When the message "Ready to print" is displayed on the

control panel, turn the power on.

•After the machine has completely turned off, turn the

controller off.

The controller is

mounted on the back of

the machine.

3-3. Fiery Controller Power-ON

1. Turn on the main power (rear: enclosed by a red frame).

2. Turn on the Power button (side of the LCD panel: marked by a

red circle).

Turn the power on in the following order.

•The main power can normally be left "ON".

•If you do not use the product for a long period of

time (for example, 1 or more weeks), turn off the

main power.

3-4. Fiery Controller Power-OFF (Shutdown system)

1. Touch the upper right corner of the

LCD panel. The power-related window

is displayed.

2. Press [Shutdown system].

No.

Button name Overview

Shutdown system

Turns the controller off. (Both the Fiery system and the Windows

server (OS) are turned off.)

Reboot system

Reboots only the Fiery system. The Windows server (OS) does not

reboot.

Restart server

Reboots both the Fiery system and Windows server.

Brightness

Allows you to change the screen brightness.

Restart display

Reboots only the display.

5 buttons are displayed. For an explanation of

each button, refer to the table below.

* The displayed contents vary depending on

the version.

3Power-On/Off

3-5. Recommended Useful Functions

This system provides useful functions related to the power supply and job output of

the KM and Fiery controllers.

Name Description KM Fiery

Machine/controller

power

synchronization

setting

Set whether to synchronize the power supply

of the machine with that of the image

controller.

✓*1 ✓*2

Next day

continuation

setting

When the sub power of this system is turned

off, a job in progress or a job reserved for

output is held, and executed continuously at

the next startup.

✓*1 -

*1: Can be set from Administrator Setting. For details, refer to the User's Guide.

*2: Can be set from Command WorkStation - Configure.

✓: Functions are provided.

•For information about how to turn the machine on,

refer to "3-1. Machine".

•The UK-301 power supply is mounted on the back

of the IQ-501.

1. Turn the machine on.

2. Turn the UK-301 on.

3-6. Option

The optional UK-301 must also be turned on and off.

Turn the UK-301 on in the following order.

* This option is synchronized with the sub power switch of the machine, so normally,

you do not need to turn it off.

4Paper Feed Route and Paper Jam Processing

4. 5.

4-1. Paper Feed Route in the Machine

Output Tray Output Tray

Output Tray

* The product configuration (combination of options) is an example.

4-2. How to See the Paper Jam Display

•If a paper jam occurs while printing or copying, the message [Paper JAM] and the

paper jam location are displayed on the control panel (screen).

•Follow the on-screen instructions to clear the paper jam.

[JAM Position] screen: Example

How to clear a paper jam

[Illustration] screen:

Example

1. Message display area

Displays the concrete method to clear

paper jams.

2. Jam number/work procedure

illustration display area

Displays the paper jam location, the

work procedure, and others.

3. [Illustration]

Press this key to display the screen that

illustrates how to process with the

highest priority.

4. [Next]

Press this key to see the next page of

the paper jam clearing procedure.

5. [JAM Position]

Press this key to return to the [JAM

Position] screen.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Konica Minolta Drucker Handbücher

Konica Minolta

Konica Minolta BIZHUB 131F Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 7450 Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 1600W Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 225i Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 40P/40PX Originalbetriebsanleitung

Konica Minolta

Konica Minolta PagePro 1350W Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 5550 Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 2300 DL Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 3300 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub PRO 951 Bedienungsanleitung

Konica Minolta

Konica Minolta A32P011 Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 7450 II Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB PRO C6500 Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 5450 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub PRESS C70hc Originalbetriebsanleitung

Konica Minolta

Konica Minolta Magicolor 4750DN Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub pro 1100 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 3301P Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 36 Handbuch

Konica Minolta

Konica Minolta Magicolor 2500W Handbuch

Konica Minolta

Konica Minolta bizhub 40P/40PX Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 1600W Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 3300P Bedienungsanleitung

Konica Minolta

Konica Minolta PagePro 1400W Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung