Konica Minolta Bizhub C253 Series Bedienungsanleitung

E-1

INSTALLATION MANUAL

A02E-9951-00

Be sure to correctly follow the procedures in order as explained in this installation manual.

If you do not follow the procedure in order, the image trouble may occur.

I. Outline of installation procedures

When installing the machine and associated options as a system, follow the order shown on the upper.

Note:

• For the detailed installation procedures for each option, follow the instructions given in the corresponding

installation manual and perform the procedures correctly.

• When placing the machine on the floor, make sure to use the paper feed cabinet or the desk to secure

the performance and the quality of the product.

• Once the Power Switch is turned ON, do not turn OFF it until the installation work has been completed.

• Lifting the machine in an awkward position or transporting it in a poorly balanced position could result in

personal injury. When transporting the machine, assign an adequate number of persons to the job and

ensure that each person can take a good position of not being excessively loaded.

(mass: approx. 99 kg (218-1/4 lb))

DF-611

✱Electron system options

PC-104 PC-204 DK-504PC-405

Electron system options

OC-507SP-501

AU-101

AU-201

WT-502 Machine

EK-603*

FK-502*

SA-501*

ML-501 FK-502

SC-503*

MK-711

FS-519

MT-502 SD-505

PK-515

OT-602

JS-505

MK-713

* : No particular order in installation procedures.

A02EIXC006DA

Applied Machines: / /

E-2

II. Installation space (unit: mm (inch))

bizhub C353 + FS-519 + SD-505 + DF-611

+ PC-405 + MK-713

III. Pre-installation check items

1. Select a level and stable place for installing the

machine.

2. Be sure to use a power source of the voltage and

frequency indicated in the product specifications.

Ensure that the current carrying capacity of the

power outlet is at least equal to the current listed

in the product specifications.

3. Power the machine directly from a dedicated

power outlet. (Do not use an extension cord.)

4. Do not plug or unplug the power cord with wet or

dirty hands, otherwise you may get an electric

shock.

5. Avoid a hot and humid environment, or a place

exposed to direct sunlight.

6. Avoid a dusty location, or a place near volatile

and flammable substances.

7. Avoid a poorly ventilated place.

IV. Accessory parts

* Varies depending on the applicable marketing

area.

A02EIXC007DA

991

(39)

190

(7-1/2)

2049

(80-11/16)

677

(26-5/8)

191

(7-1/2)

1429

(56-1/4)

246

(9-11/16)

852

(33-9/16)

281

(11-1/16)

1649

(64-15/16)

494

(19-7/16)

130

(5-1/8)

1025

(40-3/8)

No. Name Q’ty

1. Imaging unit (IU): Y,M,C,K 4

2. User’s guide holder 1

3. Quick guide

(Copy/Fax/Scan/Box operations) * 1

4. Installation manual 1 set

5. CD-ROM * 3

6. Paper size label 1

7. Label (Legal restrictions on copying) * 1

8. Cap A (round-head) 2

9. Cap B (square-head) 2

10. Power cord * 1

11. Power cord instruction * 1

12. Connector cover 1

13. Cord clamp * 1

14. Cover A

(Mounted under

the control

panel.) 1

15. Cover B

(Mounted when

neither the paper

feed cabinet nor

the desk is

mounted.)

16. Screw A

(3 × 6 mm) 3

17. Screw B

(3 × 8 mm) 1

18. Screw C *

(3 × 8 mm) 1

After unpacking, be sure to get rid of the

packaging materials and keep them out of

the reach of children.

Putting the head in the plastic bag

involves danger of suffocation.

A02EIXC066DA

A02EIXC065DA

4040IXC046DA

9J08IXC078DA

A090IXC001DA

E-3

V. Removing the machine

1. Open the shipping carton and remove the IU car-

ton and machine carton.

2. Pull out the handles.

3. Holding onto the portions shown in the illustra-

tion, remove the machine while maintaining a

level position.

Note:

Machine mass: 99 kg/218-1/4 lb

Make available collective manpower of an appro-

priate size for transporting the machine.

When attaching the machine, as the reference fit

the machine with the corner A and B of the paper

feed cabinet.

VI. Removing protective tape, packing and

other shipping materials

1. Remove protective tape from different parts of the

machine.

2. Remove the packing bracket.

A02EIXC008DA

A02EIXC009DA

A02EIXC010DB

A02EIXC011DC

A02EIXE093DB

A02EIXE094DB

A02EIXC014DA

E-4

3. Remove the protective sheet.

4. Slide out the 1st drawer and remove protective

tape from the inside of the drawer.

5. Slide out the 2nd drawer and remove protective

tape from the inside of the drawer.

6. Remove the screw from the back of the control

panel.

7. Pull the lever and raise the control panel until the

indention shown in the illustration is placed in a

horizontal position.

8. After placing the indentation in a horizontal posi-

tion, push the control panel toward the machine

until it stops and raise it. Then release the lever.

9. Secure the control panel with the screw that has

been removed in step 6.

A02EIXC015DA

A02EIXC016DB

A02EIXC017DA

A02EIXC018DB

A02EIXC019DB

Indentation Horizontal

A02EIXC020DB

A02EIXC021DB

E-5

10. Place the control panel cable into the cover A

furnished with the machine. Secure the cover

with screws (three screw A’s furnished with the

machine).

11. Remove the protective material from the control

panel cable.

VII. Installing the IU

1. Open the front door.

2. Tilt the IU to the left and, in that condition, shake it

over a small stroke twice. Then, tilt the IU to the

right and, in that condition, shake it over a small

stroke twice.

3. Remove the top cap and protective sheet of the

IU.

A02EIXC022DB

A02EIXC095DA

A02EIXC023DA

A02EIXC024DB

A02EIXC025DA

E-6

4. Keeping the IU in the level position, insert it all

the way as far as it will go.

Note:

• Make sure that the color is same between

inserting port and the IU.

• Make sure that the blue label position of the IU

is matched with the one of the machine side.

5. Push the IU all the way in.

Note:

Make sure that the IU is pushed all the way in.

6. Using the same procedure, install all IUs.

VIII. Installing the toner cartridge

Note:

Since cartridge is not furnished with the machine,

purchase toner cartridge (of different colors) sepa-

rately.

1. Shake the toner cartridge right and left five to ten

times.

Note:

Shake the cartridge adequately. Otherwise, it may

cause trouble.

2. Insert the toner cartridge into the machine.

Note:

• Make sure that the color is same between

inserting port and the toner cartridge.

• Make sure that the blue label position of the

toner cartridge is matched with the one of the

machine side.

A02EIXC026DB

A02EIXC028DA

A02EIXC029DA

A02EIXC030DA

E-7

3. Push the toner cartridge all the way in.

Note:

Make sure that the toner cartridge is pushed all the

way in.

4. Using the same procedure, install the toner car-

tridges for other colors of toner.

5. Close the front door.

IX. Connecting the power cord and

mounting the accessory parts

1. Connect the power cord.

2. Fit the cord clamp furnished with the machine

over the power cord (one screw furnished with

the machine).

Note:

This step may not be performed depending on the

applicable marketing area.

3. Plug the power cord into the power outlet.

A02EIXC031DA

A02EIXC032DA

A02EIXE096DA

A02EIXE097DA

C4004U139CA

E-8

4. Attach the cap A and B furnished with the

machine.

5. Attach the connector cover furnished with the

machine.

6. Insert the cover B two projections into the holes

on the right side of the machine as shown in the

illustration. Secure the cover B with the screw

(one screw B’s furnished with the machine).

Note:

This operation should be performed only when the

paper feed cabinet and the desk are not mounted.

X. Installing the user’s guide holder

Install the user’s guide holder.

XI. Mounting the original cover

Install the original cover.

XII. Installing the set guide for banner

paper

Open the manual bypass tray and set the set guide

for banner paper.

A02EIXC033DA

A02EIXC034DA

A02EIXC035DA

A02EIXC036DA

A02EIXC037DA

A02EIXC038DA

A02EIXC039DA

A02EIXC040DB

E-9

XIII. Adjusting touch panel

1. Turn ON the Main Power Switch and then Sub

Power Switch.

2. Press the accessibility key.

3. Touch “Touch Panel Adjustment.”

4. Using a ballpoint or similar device, lightly touch

the center of the + markers at four places on the

touch panel.

(Any specific marker can be the first one.)

Note:

Pressing the touch panel hard may cause dam-

age.

* When all the markers at four places have been

touched, the start key turns blue and lights up

steadily blue.

5. Press the start key.

6. Touch “Close.”

XIV. Setting gradation adjust

1. Set that A3 or Ledger paper is loaded in

the tray.

2. Display the Service Mode screen.

(For details of how to display the Service Mode

screen, see the service manual.)

3. Touch “Imaging Process Adjustment.”

4. Touch “Gradation Adjust.”

5. Touch “Stabilizer” and press the start key.

* When the start key lights up blue, go to step 6.

Note:

When a maintenance call occurs, see the service

manual.

6. Touch “High Compression Mode” and press the

start key.

A test pattern will then be produced on the A3

or Ledger paper.

A02EIXE051DA

A00JIXE183DA

A00JIXE184DB

A00JIXE195DA

A00JIXE185DA

E-10

7. Place the test pattern face down on the original

glass.

8. Place about ten sheets of A3 or Ledger

paper on the test pattern placed on the original

glass.

Lower the cover.

9. Press the start key.

The machine will start reading the test pattern.

10. When the machine completes reading the test

pattern, the “Gradation Adjust” screen will reap-

pear.

11. Repeat steps from 6 through 9 to let the

machine read the test pattern two times.

12. Touch “Gradation Mode” and press the start key.

A test pattern will then be produced on the

A3 or Ledger paper.

13. Place the test pattern face down on the original

glass.

14. Place about ten sheets of A3 or Ledger

paper on the test pattern placed on the original

glass.

Lower the cover.

15. Press the start key.

The machine will start reading the test pattern.

16. When the machine completes reading the test

pattern, the “Gradation Adjust” screen will reap-

pear.

17. Repeat steps from 12 through 15 to let the

machine read the test pattern two times.

18. Touch “Resolution Mode” and press the start

key.

A test pattern will then be produced on the

A3 or Ledger paper.

A02EIXC041DA

A02EIXC042DA

A00JIXE186DA

A02EIXC043DA

A02EIXC042DA

A00JIXE187DA

Andere Handbücher für bizhub C253 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Konica Minolta Drucker Handbücher

Konica Minolta

Konica Minolta Magicolor 5650EN Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 2450 Kurzanleitung

Konica Minolta

Konica Minolta magicolor 1650EN Originalbetriebsanleitung

Konica Minolta

Konica Minolta AccurioPress 6136 Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 1600W Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 2350 EN Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 7300 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub PRESS C70hc Originalbetriebsanleitung

Konica Minolta

Konica Minolta MS6000 MKII Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Handbuch

Konica Minolta

Konica Minolta bizhub 350 Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 500 Bedienungsanleitung

Konica Minolta

Konica Minolta 7820n Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub PRESS C8000 Bedienungsanleitung

Konica Minolta

Konica Minolta A0DX011 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 200 Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 5440 dl Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 3300 Bedienungsanleitung

Konica Minolta

Konica Minolta AccurioPress C2070 Bedienungsanleitung

Konica Minolta

Konica Minolta Crown II Kurzanleitung

Konica Minolta

Konica Minolta Magicolor 2500W Bedienungsanleitung

Konica Minolta

Konica Minolta 2230 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 4050 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub PRO 951 Installationshandbuch

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung

Lexmark

Lexmark Infoprint 1332 Bedienungsanleitung

Konica Minolta bizhub C253 Series Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken