Konica Minolta Color Care IQ-501 Bedienungsanleitung

IQ-501 Quick Guide

KONICA MINOLTA

2/27/2020 5:45 PM／D11

Table of contents

Want to Do/Step Execution

Timing Procedure Page

1a. Dairy Care/Preparation Initial only

(one time)

- Basic settings (step 1-35)

- Setting Summary

p.2

p.12

1b. Dairy Care/Execution Everyday - Auto Run (step 1-6)

p.13

Once a day - Manual Execution (step 7-12) p.15

2. Adjust registration for

new paper/Execution

When Combination

of Paper and tray

is changed

- Loading paper to

/Main Body (step 1-9)

/PF-602m(normal) (step 10-19)

/PF-602m(small) (step 20-25)

/PF-707m(normal) (step 26-34)

/PF-707m(small) (step 35-40)

/LU-202m/202XL/XLm (step 41-49)

p.17

-Auto Measure (step 50-62) p.34

3a. Keep registration and

constant color reproduction

during long printing for the

job with Trim Margin

/Preparation

When paper is

changed

- Confirm paper size (Step 1)

- Conformation of Auto Image Adj.

Settings (Step 2-11)

- Package color auto adj. incl

Color Density Control (Step 12-17)

- Both side adjustment (Step 18-30)

- Setting Summary

p.38

p.46

3b.Keep registration and

constant color reproduction

during long printing for the

job with Trim Margin

/Execution

When you start

printing long job

actually

- Print the job by

/Konica Minolta controller (A)

/EFIcontroller (B)

/CREO controller (C) p.47

4a.Keep registration and

constant color reproduction

during long printing for the

job without Trim Margin

/Preparation

When paper is

changed

- Color Density Control setting

(Step 1-7)

- Periodical Both Side Adjustment

setting (Step 8-9)

- Setting Summary

p.49

p.51

4b.Keep registration and

constant color reproduction

during long printing for the

job with Trim Margin

/Execution

When you start

printing long job

actually

- Print the job by

/Konica Minolta controller (A)

/EFIcontroller (B)

/CREO controller (C)

p.52

NOTICE This manual describes the procedures for C3080 as an example.

2/27/2020 5:45 PM／D11

Load “Max density adjustment” paper

into the tray 1.

(Tray # is an example in this manual)

✔ As for selecting adjustment paper, please consult

with service representative.

In general, coated paper is recommended since

color and density reproduction are stable.

Load “the paper actually used for the job”

into the tray 2.

(Tray # is an example in this manual)

✔ An paper should be

lengthwise (X): 420.0 mm to 487.7 mm,

widthwise (Y): 279.4 mm or more).

1a. Daily Care /Preparation (=Basic settings)

2/27/2020 5:45 PM／D11

Press the “Utility/Counter” key.

Press [Administrator Setting].

If the [Administrator Password] screen

is displayed, enter the administrator

password using 8 to 64 one-byte

characters, then press [OK].

✔ The administrator password must be specified using

8 to 64 one-byte

characters.

The [Administrator Setting Menu] screen

is displayed.

Press [System Setting].

Press [Expert Adjustment].

2/27/2020 5:45 PM／D11

Press [Quality Adjustment].

Press [Custom Screen].

Select [Dot190] for [Screen1]

Press [OK].

Press [Exit].

2/27/2020 5:45 PM／D11

Press [Adjustment] on the [MACHINE]

screen.

Press [Quality Adjustment].

Press [Color Density Control].

Press [Basic Setting].

2/27/2020 5:45 PM／D11

Select each item as follows

- [Use Color Density Control] > [ON]

- [Periodical Adj. Execution] > [ON]

- [Adjustment Execution timing]

> [During Job Runs]

- [Chart Tray Setting] > [OFF]

Press [Next].

Select each item as follows

- [Adjustment Interval] > [ON]

Press [Change] and set [1000 pages].

- [Concurrent Execution of BothSidesAdj.]

> [ON]

Press [OK].

Press [Close].

2/27/2020 5:45 PM／D11

Press [Image Diagnosis]

NOTICE

If [Image Diagnosis] is not displayed even

IQ-501 is equipped, please contact your service

representative.

Press [Basic Setting].

Select each item as follows

[DetailedDiagnosis/Sync.SimpleDiagnosis]

> [ON]

[Detailed Diagnosis Result Auto Reset]

> [ON]

[Output Stored Job after Diagnosis]

> [OFF]

Press [OK].

Press [Close].

2/27/2020 5:45 PM／D11

Press [Package Color Auto Adj.].

Press [Initial Set.].

Select each item as follows

For KM controller

- [Screen of Adjustment Target] > [Screen1]

- [Auto Selection] > [OFF]

- [Gamma Auto. Adj.] > [ON]

- [Dens. BalanceAdj.] > [ON]

- [Max Density Adj.] > [ON]

- [Color Density] > [ON]

- [Exact Color] or [G7 Calibration] > [ON]

- [Exact Color : Number of Output Job] > [1] or

- [G7 Calibration : Number of Output Job] > [1]

For EFI/CREO controller

- [Screen of Adjustment Target] > [Screen1]

- [Auto Selection] > [OFF]

- [Gamma Auto. Adj.] > [ON]

- [Dens. BalanceAdj.] > [ON]

- [Max Density Adj.] > [ON]

- [Color Density] > [ON]

- [ControllerCalib.] > [ON]

Press [Next].

2/27/2020 5:45 PM／D11

[Maximum Density

Adjustment Tray] > [Tray1]

Press [Next].

(“Max density adjustment paper is loaded

into the tray 1 as an example.)

Select each item as follows

- [Adjustment Tray] > [Tray2]

- [Auto Run] > [OFF]

- [Overwrite Tray Set. of Max.DensityAdj.]

> [ON]

Press [OK].

(“The paper actually used for the job is

loaded into the tray 1 as an example.)

Press [Start].

Andere Handbücher für Color Care IQ-501

Inhaltsverzeichnis

Andere Konica Minolta Drucker Handbücher

Konica Minolta

Konica Minolta bizhub 3301P Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 40P/40PX Bedienungsanleitung

Konica Minolta

Konica Minolta AccurioPress C7100 Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 164 Bedienungsanleitung

Konica Minolta

Konica Minolta DRYPRO 771 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 552 Handbuch

Konica Minolta

Konica Minolta bizhub C550 Series Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 1690MF Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 4752 Bedienungsanleitung

Konica Minolta

Konica Minolta A0VD011 Originalbetriebsanleitung

Konica Minolta

Konica Minolta Magicolor 5430 DL Bedienungsanleitung

Konica Minolta

Konica Minolta PagePro 1350E Bedienungsanleitung

Konica Minolta

Konica Minolta PAGEPRO 4650EN Originalbetriebsanleitung

Konica Minolta

Konica Minolta PAGEPRO 4650EN Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB C250P Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 3300 Handbuch

Konica Minolta

Konica Minolta Magicolor 2350 EN Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 40P/40PX Originalbetriebsanleitung

Konica Minolta

Konica Minolta bizhub C35 Handbuch

Konica Minolta

Konica Minolta magicolor 1600W Originalbetriebsanleitung

Konica Minolta

Konica Minolta bizhub C754L bizhub C654 Handbuch

Konica Minolta

Konica Minolta PagePro 1400W Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 24 0 Series Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB PRO C500 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung

Lexmark

Lexmark Infoprint 1332 Bedienungsanleitung