Kontron CPCI-DMXS64GX Produkthandbuch

cPCI-DMXS64GX

6U CompactPCI®64-bit System Processor

Version 1.2

Technical Reference Manual February 2003

Ref. : M6007_TECH

(board revision 1)

NOTE :

This manual is for reference purpose

only. Reproduction in whole or in part

is authorized provided Kontron

Canada Inc. is cited as the original

source.

Note: The latest releases of the Technical Reference Manuals are available at:

ftp://ftp.kontron.ca/Support/Product_Manuals/

FCC COMPLIANCE STATEMENT

Warning

Changes or modifications to this unit not expressly approved by the party responsible for

the compliance could void the user’s authority to operate this equipment.

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference, in which case the user will be required to

correct the interference at his or her own expense.

European Statement

Warning

This is a class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

Safety Standard

UL Recognized Component, File # E186339 vol. 1 section 2

Care and handling precautions for Lithium batteries

•Do not short circuit

•Do not heat or incinerate

•Do not charge

•Do not deform or disassemble

•Do not apply solder directly

•Do not mix different types or partially used batteries together

•Always observe proper polarities

FOREWORD

The information in this document is provided for reference purposes only. Kontron

Communication does not assume any liability for the application of information or the use

of products described herein.

This document may contain information or refer to products protected by the copyrights or

patents of others and does not convey any license under the patent rights of Kontron

Communication, nor the rights of others.

Printed in Canada.

READ ME FIRST

Your computer board has a standard non-rechargeable lithium battery. To preserve the

battery lifetime, the battery enable jumper is removed when you receive the board. If

you do not have any jumper cap, we suggest you to use the Watchdog Timer jumper cap.

EXERCISE CAUTION WHILE REPLACING LITHIUM BATTERY

 WARNING

Danger of explosion if battery is incorrectly replaced. Replace only with

the same or equivalent type recommended by the manufacturer. Dispose

of used batteries according to the manufacturer's instructions.

 ATTENTION

Il y a danger d’explosion s’il y a remplacement incorrect de la batterie.

Remplacer uniquement avec une batterie du même type ou d’un type

équivalent recommandé par le constructeur. Mettre au rebut les batteries

usagées conformément aux instructions du fabriquant.

 ACHTUNG

Explosionsgefahr bei falschem Batteriewechsel.

Verwenden Sie nur die empfohlenen Batterietypen des Herstellers.

Entsorgen Sie die verbrauchten Batterien laut Gebrauchsanweisung des

Herstellers.

 ATENCION

Puede explotar si la pila no este bien reemplazada.

Solo reemplazca la pila con tipas equivalentes segun las instrucciones del

manifacturo. Vote las pilas usadas segun las instrucciones del

manifacturo.

 IMPORTANT

J1 and J2 are de-facto industry standard as defined by PICMG.

J3, J4 and J5 are user-defined connectors and will vary from various

manufacturers. Contact our Technical Support to verify pinout

compatibility with other chassis backplane vendors.

 CAUTION

If you should encounter a problem, verify the following items:

Make sure that all connectors are properly connected.

Verify your boot disk.

If the system still does not start up properly, you should try booting your

system with only the power cord and video monitor connected to the

board this is the minimum required to see if the board is working).

If you still are not able to start up your system, please refer to the

emergency Procedure in the Appendix Section.

If you still are not able to get your board up and running, contact our

technical Support department for assistance.

 PREVENTING VIRUSES

To safeguard against computer viruses in general, do not freely lend your

utility diskettes and regularly perform virus scans on all your computer

systems.

 ADAPTER CABLES

While adapter cables are provided from various sources, the pinout is

often different. The direct crimp design offered by Kontron allows the

simplest cable assembly. All cables are available from Kontron

Communications Sales Department, (450) 437-5682.

UNPACKING AND SAFETY PRECAUTIONS

Static Electricity

Since static electricity can damage the board, the following precautions should be taken:

1. Keep the board in its antistatic package, until you are ready to install it.

2. Touch a grounded surface or wear a grounding wrist strap before removing the board

from its package; this will discharge any static electricity that may have built up in

your body.

3. Handle the board by the edges.

Storage Environment

Electronic boards are sensitive devices. Do not handle or store devices near strong

electrostatic, electromagnetic, magnetic or radioactive fields.

Power Supply

Before any installation or setup, ensure that the board is unplugged from power sources or

subsystems.

Unpacking

Follow these recommendations while unpacking:

1. After opening the box, save it and the packing material for possible future shipment.

2. Remove the board from its antistatic wrapping and place it on a grounded surface.

3. Inspect the board for damage. If there is any damage, or items are missing, notify

Kontron immediately.

When unpacking you will find:

1. 6U CompactPCI®64-bit System Processor board

2. One Quick Reference sheet

3. One CDROM containing drivers and documentation.

TABLE OF CONTENTS

1. PRODUCT DESCRIPTION.............................................................................. 7

1.1. Product OVERVIEW.............................................................................................1

1.2. Product Specifications..........................................................................................2

1.3. Hot Swap capability..............................................................................................4

Interfacing with the Environment ..................................................................................6

1.3.1. cPCI.......................................................................................................................6

1.3.2. Mezzanine..............................................................................................................6

1.4. Compatibility with other Kontron Products............................................................7

1.5. Mezzanine Card Concept.....................................................................................8

1.5.1. Kontron’s Mezzanine Concept................................................................................8

1.5.2. PMC Concept.........................................................................................................9

1.5.3. CompactFlash Feature...........................................................................................9

2. ONBOARD FEATURES ................................................................................ 11

2.1. CompactFlash Interface.......................................................................................1

2.1.1. Setups....................................................................................................................1

2.2. Enhanced IDE Interfaces .....................................................................................2

2.3. Ethernet Interfaces............................................................................................... 3

2.3.1. Front Plate Configuration........................................................................................3

2.3.2. CPCI I/O Configuration...........................................................................................4

2.4. Floppy Disk Interface............................................................................................4

2.5. PS/2 Keyboard AND Mouse Interface..................................................................5

2.6. Parallel Port..........................................................................................................5

2.6.1. Standard Mode.......................................................................................................6

2.6.2. EPP Mode..............................................................................................................6

2.6.3. ECP Mode..............................................................................................................7

2.7. Power Management.............................................................................................7

2.8. SCSI Interface...................................................................................................... 7

2.9. Serial Ports...........................................................................................................8

2.9.1. SERIAL PORT 1.....................................................................................................9

2.9.1.1. Remote Reset ..........................................................................................9

2.9.1.2. Front Plate Configuration........................................................................10

2.9.2. Serial Port 2 .........................................................................................................10

2.9.3. Serial Port 3 .........................................................................................................11

2.9.3.1. Infrared Mode.........................................................................................13

2.9.3.2. RS-232 Protocol.....................................................................................13

2.9.3.3. RS-422 Protocol.....................................................................................13

2.9.3.4. RS-485 Protocol.....................................................................................13

2.10.Thermal Management........................................................................................14

2.11.USB Interfaces...................................................................................................15

2.12.Video Interface...................................................................................................16

2.12.1. Supported Resolutions.........................................................................................17

2.12.2. Major Features Description...................................................................................17

iii

3. Installing the Board...................................................................................... 19

3.1. Setting Jumpers ...................................................................................................1

3.1.1. Jumper Description for the CPCI-DMXS64GX........................................................1

3.1.2. CPCI-DMXS64GX – Jumper Settings ....................................................................2

3.1.3. Register’s description RS232/RS485......................................................................3

3.1.4. History and monitor status......................................................................................3

3.1.5. Multimedia, History status.......................................................................................4

3.1.6. Monitoring status and I/O access............................................................................4

3.1.7. Uart 3 PnP configuration ........................................................................................4

3.1.8. Digital watchdog.....................................................................................................5

3.1.9. NMI control.............................................................................................................6

3.1.10. Register BITs description (summary)......................................................................7

3.2. Onboard Interconnectivity ....................................................................................8

3.2.1. cPCI-DMXS64GX Block Diagram...........................................................................8

3.2.2. Mobile Pentium®II / III processor............................................................................9

3.2.3. North Bridge Chipset..............................................................................................9

3.2.4. 21154 PCI-to-PCI Bridge........................................................................................9

3.2.5. 82371AB PCI-to-ISA Bridge / IDE Xcelerator (PIIX4)............................................10

3.2.6. Onboard Connectors and Headers.......................................................................11

3.2.7. Front Plate Connectors and Indicators..................................................................12

3.2.8. FACEPLATE OPTIONS .......................................................................................13

3.2.9. CompactPCI Connectors......................................................................................14

3.3. Customizing the Board.......................................................................................15

3.3.1. Processor and Fan...............................................................................................15

3.3.2. Backup Battery.....................................................................................................16

3.3.3. Memory................................................................................................................17

3.3.3.1. SDRAM System Memory........................................................................17

3.3.3.2. DIMM Installation....................................................................................18

3.3.4. Supervision Features............................................................................................19

3.3.4.1. Power Fail Monitoring.............................................................................19

3.3.4.2. Watchdog...............................................................................................20

3.3.4.3. Thermal Management ............................................................................22

3.4. Building a CPCI System..................................................................................... 23

3.4.1. Backplane............................................................................................................24

3.4.2. Rear-Panel I/O.....................................................................................................25

3.4.3. Storage Devices...................................................................................................27

3.4.4. Power Supply.......................................................................................................27

3.4.5. Fan Tray...............................................................................................................27

3.4.6. Installing the Board into a Bay..............................................................................27

3.4.7. Connector Keying.................................................................................................28

3.4.8. Bus Mastering......................................................................................................29

3.4.9. Connection...........................................................................................................29

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kontron Computerhardware Handbücher

Kontron

Kontron COMh-sdID Bedienungsanleitung

Kontron

Kontron ThinkIO-P Bedienungsanleitung

Kontron

Kontron AT8060 Bedienungsanleitung

Kontron

Kontron CP6016 Bedienungsanleitung

Kontron

Kontron MPC-pONE Bedienungsanleitung

Kontron

Kontron PCI-946-1 Produkthandbuch

Kontron

Kontron ePanel-mgx Bedienungsanleitung

Kontron

Kontron SMARC-sAMX8 Bedienungsanleitung

Kontron

Kontron 820951 ADD2-DVI-Dual-Internal Bedienungsanleitung

Kontron

Kontron Kiss 2U Bedienungsanleitung

Kontron

Kontron nanoETXexpress-HMI Baseboard Bedienungsanleitung

Kontron

Kontron USB-16REL Bedienungsanleitung

Kontron

Kontron Kiss-Stor 0/5 Bedienungsanleitung

Kontron

Kontron AT8901 Bedienungsanleitung

Kontron

Kontron COMe-mSP1 Bedienungsanleitung

Kontron

Kontron COMh-caRP Bedienungsanleitung

Kontron

Kontron AT8402 Bedienungsanleitung

Kontron

Kontron COMe-bP5020 Bedienungsanleitung

Kontron

Kontron MITX-CFL0 Series Bedienungsanleitung

Kontron

Kontron COM Express Eval 10 Bedienungsanleitung

Kontron

Kontron SMARC-sAMX8X Bedienungsanleitung

Kontron

Kontron SDML-WLU0 Series Bedienungsanleitung

Kontron

Kontron SMARC-sAMX6i Bedienungsanleitung

Kontron

Kontron CP6005-SA Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung

Measurement Computing

Measurement Computing CIO-EXP-RTD16 Bedienungsanleitung

Matrox

Matrox DigiSuite DigiMix Installations- und Betriebsanleitung

Kontron cPCI-DMXS64GX Produkthandbuch

Beliebte Computerhardware Handbücher anderer Marken