Korenix JetNet 3008 v3 Bedienungsanleitung

JetNet 3008 v3

JetNet 3008f v3

Industrial 8-port Ethernet Switch

User’s Manual

Version:1.1Date: 26-Jun-2013

Content

1. Introduction ................................................................. 1

1-1. Features...................................................................... 2

1-2. Packing List................................................................. 2

2. Hardware Description.................................................. 3

2.1. Dimensions ........................................................... 3

2-2 Front Panel ........................................................... 4

2-3. Bottom View.......................................................... 4

2-4. LED Indicators ...................................................... 5

2-5. Ports ..................................................................... 6

3. Mounting Installation ................................................... 7

DIN-Rail Mounting ............................................................... 7

4. Hardware Installation .................................................. 9

4-1. Wiring the DC Power Inputs ................................ 10

4-2. Wiring the Alarm Relay ....................................... 11

4-3. Wiring Earth Grounding....................................... 12

4-4. Enabled the Event Alarm Function ...................... 12

4-5. Cabling................................................................ 14

4-6. System Power-On and Testing ........................... 15

5. Packet forwarding and filtering ability ........................ 19

5-1. Broadcast Control ............................................... 19

5-2. Quality of Service ................................................ 19

6. Trouble shooting ....................................................... 22

Federal Communications Commission (FCC) Statement

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his expense.

The user is cautioned that changes and modifications made to the equipment without

approval of the manufacturer could void the user's authority to operate this equipment.

JetNet 3008 v3 / JetNet 3008f v3 User’s Manual

1. Introduction

The JetNet 3008V3/ 3008f V3 is an 8-port Fast Ethernet switch designed

with enhanced design specifications, including wider operating

temperature and power input range to best fit in heavy industrial field

applications. It is equipped with 2.0Gbps High performance switching

engine with packet forwarding and filtering mechanism to fulfill higher

performance industrial data communication requirements in field site

deployments. The graceful packet forwarding ability enables the JetNet

3008f V3 to handle from 64 to 1522 bytes packet sizes into 2 forwarding

priority queues which is compliant with IEEE 802.1p Class of Service for

providing best data forwarding performance.

In addition, to ensure best network performance, both broadcast storm

filtering and flow control functions can ensure your data traffic delivery to

destination without traffic congestion. The combination of enhanced

network features and rugged specs make the JetNet 3008 V3 /JetNet

3008f V3 become your best entry-level networking solution in industrial

deployments.

Reliable Power System Design

In order to operate under harsh environment of industrial sites, JetNet

3008 V3 series are designed with redundant wide power input 10~60VDC

range as well as auto polarity reverse function to ensure the switch’s

capability of transmitting data under poor DC power sourcing.

Brilliant Electromagnetic Interference Immunity

In industrial applications with widespread electromagnetic interference,

such as the automation control and high power motor operating

environments, the switch’s electromagnetic immunity ability will affect the

quality of data transfer. The JetNet 3008 V3, compliant with the

electromagnetic interference requirements for Heavy Industrial

applications, provides a high level of electromagnetic susceptibility

exceeding the IEC/EN 61000-6-2 standard with distinguished electrical

slow transient (Surge), radio-frequency electromagnetic field (RS),

Electrical Fast Transient (EFT) protections. Equipped with a rugged

aluminum case with IP31 grade protection and high thermal conductivity

design, it is capable of resisting -25~70℃(JetNet 3008), -10~70℃

(JetNet 3008f) and -40~75℃(JetNet 3008-w/ JetNet 3008f-w) wide

temperature ranges while providing reliable connectivity under harsh

industrial environments.

This session will introduce following information of JetNet 3008 for your

reference.

1. Features

2. Packing list

1-1. Features

8 10/100TX ports –JetNet 3008

6 10/100TX, plus 2 100FX in Multi-mode or Single-mode –JetNet

3008f

Compact size with full power redundancy

2.0Gbps Switch Fabric with excellent data exchange performance

QoS for packet forwarding precedence

Broadcast storm packet filtering

Port and power event alarm

Aluminum metal case with IP31 grade protection

DIN rail installation

Dual power input DC10~60V

Support 1.5KV Hi-Pot isolation protection

Operating temperature: -25~70oC (JetNet 3008 V3) and -40~75oC

(JetNet 3008-w V3), -10~70oC (JetNet 3008f V3) and -40~75oC

(JetNet 3008f-w V3)

1-2. Packing List

JetNet 3008 v3/JetNet 3008f v3 Industrial 8-port Fast Ethernet Switch is

packaged with the following items:

JetNet 3008 or JetNet 3008f

Quick Installation Guide

Contact your sales representative if any item is missing or damaged.

JetNet3008 v3 JetNet 3008f v3

Quick Installation Guide

2. Hardware Description

This session will introduce the hardware information as following:

2-1. dimensions

2-2. Front Panel

2-3. Bottom View

2-4. LEDs of system and port

2-5. Connectors

2.1. Dimensions

JetNet 3008 / JetNet 3008f 8-port Industrial Fast Ethernet Rail Switch

dimensions are 120 mm (H) x 55 mm (W) x 108 mm (D), detail

mechanical design drawings are attached as following:

2-2 Front Panel

The Front Panel of the JetNet 3008/JetNet 3008f Industrial 8-port Fast

Ethernet Switch is shown in Figure A.

Figure A. Front Panel of the JetNet 3008 / JetNet 3008f.

2-3. Bottom View

The bottom view of the JetNet 3008/JetNet 3008f Industrial 8-port

Ethernet Switch consists of one 6-pin removable terminal block connector

for two DC power inputs and event alarm output. There is one 9-pin DIP

SWITCH on the bottom for alarm control of port or power event selection.

Figure B. Bottom view of the JetNet 3008/ JetNet 3008f

2-4. LED Indicators

There are some system diagnostic LEDs and Ethernet Port LEDs located

on the front panel of JetNet3008 / JetNet 3008f Industrial 8-port Ethernet

Switch. These LED indicators provide administrators with real-time system

status. The table-1 gives the descriptions of the function of each LED

indicator.

LED

Status

Description

PWR1

Green on

Power is on.

Off

No power is being supplied.

PWR2

Green on

Power is on.

Off

No power is being supplied.

Alm

Red on

Port link down or power failure event

occurred.

Off

No event.

Port 1~8 (JetNet 3008)

Port 1~6 (JetNet 3008f)

Link

(Green on )

A network device is detected and link

up.

Activity (Green blinks)

The port is transmitting or receiving

packets from the TX device.

Speed

(Yellow on/ 100Mbps)

A network device is detected and link on

100Mbps.

Speed

(Yellow off)

A network device is detected and link on

10Mbps.

Fiber port #7, #8

(JetNet 3008f)

100Mbps Link (Green

on)

The port is operating in full-duplex

mode.

100Mbps Activity

(Green Blinks)

The port is transmitting or receiving

packets from the TX device.

Table 1

2-5. Ports

RJ-45 ports (Auto MDI/MDIX): JetNet 3008 has eight 10/100 Mbps

auto-sensing RJ-45 ports for 10Base-T or 100Base-TX device connection

and JetNet 3008f has six 10/100Mbps RJ-45 ports and two 100Mbps fiber

ports for multi-mode or single-mode fiber cable in SC type connector. The

RJ-45 ports will auto-detect 10Base-T and 100Base-TX connections. Auto

MDI/MDIX function allows users to connect another switch or workstation

without changing straight through or crossover cabling. See Figure C and

C-1 for the schematic diagram of straight through and crossover cabling.

Figure C Straight Through Cabling Schematic Figure C-1 Cross Over Cabling

Schematic

All RJ-45 ports of JetNet 3008/ JetNet 3008f support auto-MDI/MDI-X

function. When you use an Ethernet cable to connect other devices, such

as computers, switches or hubs, pin 1, 2, 3, and 6 of the 8-pin RJ45

connector are used to communicate with the connected devices. Pin1, 2,

3, and 6’s signals are converted by the MDI-X function, as shown in Table

-2.

Pin MDI-X

Signals

MDI Signals

RD+

TD+

RD-

TD-

TD+

RD+

TD-

RD-

Table-2

3. Mounting Installation

DIN-Rail Mounting

The DIN-Rail clip is already attached on the rear side of JetNet 3008/

JetNet 3008f. JetNet 3008 series supports EN 50022 standard DIN Rail, in

the following diagram includes the dimension of EN 55022 DIN Rail for

your reference.

The DIN rail should behind the

spring when install the JetNet

3008/JetNet 3008f onto the

standard DIN Rail.

Follow the steps below to mount

the JetNet 3008 /JetNet 3008f

on the DIN-Rail track.

1. Insert the upper end of the

DIN-Rail clip into the back of

the DIN-Rail track from its

upper side

2. Lightly push the bottom of the

DIN-Rail clip into the track.

3. Check if the DIN-Rail clip is

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Korenix Netzwerk-Router Handbücher

Korenix

Korenix JetWave 4020 Series Bedienungsanleitung

Korenix

Korenix JetNet 7850G-2XG Bedienungsanleitung

Korenix

Korenix JetNet 5010G Series Bedienungsanleitung

Korenix

Korenix JetNet 6059G Bedienungsanleitung

Korenix

Korenix JetNet 6059G Bedienungsanleitung

Korenix

Korenix JetBox9500 series Bedienungsanleitung

Korenix

Korenix JetNet 5010G Series Bedienungsanleitung

Korenix

Korenix JetNet 6528Gf-AC Bedienungsanleitung

Korenix

Korenix JetBox 9462-w Bedienungsanleitung

Korenix

Korenix 5-port 10/100 Bedienungsanleitung

Korenix

Korenix JetNet 6910G-M12 Series Bedienungsanleitung

Korenix

Korenix JetNet 6710G Bedienungsanleitung

Korenix

Korenix JetNet 6059G Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

Korenix

Korenix JetNet 3006 Series Bedienungsanleitung

Korenix

Korenix JetNet 3705 Bedienungsanleitung

Korenix

Korenix JetNet 5010G Series Bedienungsanleitung

Korenix

Korenix JetNet 5728G-24P Series Bedienungsanleitung

Korenix

Korenix JetNet 5628G Series Bedienungsanleitung

Korenix

Korenix JetNet 3508G-LVDC Series Bedienungsanleitung

Korenix

Korenix 4510 Bedienungsanleitung

Korenix

Korenix JetBox 5630 Bedienungsanleitung

Korenix

Korenix JetNet 7852G-4XG Series Bedienungsanleitung

Korenix

Korenix JetNet 5628G Series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung

Dynacord

Dynacord Promatrix 6000 Bedienungsanleitung