Korenix JetNet 6710G Bedienungsanleitung

JetNet 6710G / 6810G Series

Industrial 8-Port PoE plus 2 Gigabit-TX

Managed Etherenet Switch

Quick Installation Guide

www.korenix.com

V1.0

1. Overview

The JetNet 6710G/6810G series are Managed Industrial Power over Ethernet Switches,

equipped with eight 10/100 TX ports with 15.4 watts PoE injector and dual 10/100/1000 TX

ports for uplink connection.

By software conguration or by LLDP auto detection, the eight 10/100 TX PoE injector ports

of JetNet 6710G series can deliver 15.4W by IEEE 802.3af or 30W by the latest High Power

PoE IEEE 802.3at standard for supporting High Power Requiring Devices (PD).

Besides, the eight IEEE 802.3af PoE injector ports of JetNet 6810G series are designed with

the Korenix patented Booster PoE technology, which allows the switches to adopt 24~57VDC

input and deliver 15.4W per port at 48V for applications where DC 48V power supply is not

available.

The 2 Gigabit Ethernet ports can provide high speed uplink connectivity to higher level

backbone switches with Korenix MSRTM network redundancy technology, which can recover

any failure in less than 5milliseconds. To work under vibration and shock environments, the

switches are designed with industrial D-coded M12 connectors or rugged RJ45 connectors to

ensure exceptional solid Ethernet and PoE connections.

1-1 Packing List Checking

The JetNet 6000G series is shipped with the following items. If any of these items is missing

or damaged, please contact your customer service representative for assistance.

JetNet 6710G Managed High Power

IEEE 802.3at PoE Switch (M12 / Rugged RJ)

JetNet 6810 Managed Booster PoE

Switch ( M12 / Rugged RJ)

M12 on DB9 Shielded Console Cable

Rugged M12 D-coded 4-pole

Field Assemble able Connecter

Rugged M12 A-coded 8-pole

Field Assemble able Connector

Rugged RJ45 Field Assemble

able Connecter

2 Wall-Mount kits & 8 Screws

Quick Installation Guide

Documentation and Software CD-ROM

JetNet

6710G-M12

JetNet

6710G-RJ

JetNet

6810G-M12

JetNet

6810G-M12

11 1 1

1 1

10 10

1-2 Introduction to the Manual

2. Appearances

The following manuals are included as PDF les on the CD-ROM:

4Quick Installation Guide: includes information on installing all versions of JetNet 6710G /

6810G series PoE Switch

4User manual – Conguration: applied to the managed versions of JetNet 6710G/

6810G series PoE Switch

3. Hardware Installation

3-1 Powering of the system

The Power input port is located at the top of the front panel and supports redundant input

function via a proprietary assembly capable IP-67 connector (CDG-L207SA) included in the

shipment. If you cannot nd this power connector, please contact your local distributor. For

the available input power range and recommended cable size, please refer to the below

table.

Recommended

Maximum

Minimum

Redundant Input

V1, V2

V1, V2 bind together

AWG No. / Cable

Area (mm2)

AWG 14 / 2.0

JetNet 6710G-M12

JetNet 6710G-RJ

JetNet 6810G-M12

JetNet 6810G-RJ

Power Input (DC Voltage) Input Conductor Cable Size

Redundant

Power Input

Console

Port Alarm

Output

8x10/100 Base-TX PoE

M12 D-coding

2x1000 Base-T

M12 A-coding

LED: Power, PoE Status, Port Status,

Alarm, System Status, Ring Status

JetNet 6710G-M12 JetNet 6710G-RJ

Redundant

Power Input

Console

Port Alarm

Output

8x10/100 Base-TX PoE

M12 D-coding

2x1000 Base-T

M12 A-coding

LED: Power, PoE Status, Port Status,

Alarm, System Status, Ring Status

The JetNet 6810G only supports single power input that binds V1 and V2 together to obtain

higher current for the booster.

Use the UL listed Switching power supply to power the JetNet Switch. For the power wiring

method, please refer to the gures 3.1-1 and 3.1-2. For system safety and the anti-immunity

ability, the chassis ground screw should be well grounded to the earth ground.

Figure 3.1-1. Power Supply wiring architecture

Note:

E.G: Earth

Grounding

Figure 3.1-2 Power connector assembly diagram

The RS-232 console and the alarm relay are

connected via the assembly type of 5-pole M12

A-coding connector included in the supplied

package of JetNet switch. The following figure

3-2-1 is the disassembly diagram of M12

A-coding connector.

In the M12 connector packing, the parts 1, 2, 3

are already assembled.

Follow the steps for soldering and assembling

the cable and connector together: Figure 3.2-1 Field Assemble

M12 disassembly connector

3.2 RS-232 console and Relay Output Connection

Step -1: Slide component 4, 5, 6 and then 7 over the console

cable. Keep them loose. Do not tighten them yet. 2 cable glands

are provided for cable diameter from 3.5 to 5.8 mm. Choose the

one that best ts the cable.

Step-2: Solder the conductors with the copper

wires according to the pin assignment. The

soldering side view of the pin is shown as below:

Console port pin assignment

Step-3: Fasten the components

4, 5, 6 and 7 in sequence. Be

sure the gasket is on the right

position. See the below M12

assembly diagram: 2. Insert part 6-seal into part 5.

4. Finalized

1. Assembly part 1 and 4,

ensure the solder pins are

protected by part 4-gasket,

then locking part 1 and 5.

3. Locking part 5 and 7.

Never install or work on/with the equipment or the

cabling during the period of its lightning activity.

3.3 Assembly of Ethernet Patch Cables

You can connect terminal devices and other segments via twisted pair cables. Ports which

are not assigned should be closed with the covering caps contained in the package list of

delivery to guarantee the connector is clear without rust.

3.3.1 Assembly of M12 Ethernet

Connector

For Fast Ethernet M12 D-Code to M12

D-Code connection, you can use either

version below:

M12-to-M12 Ethernet Cable Wiring

For Fast Ethernet M12 D-Code to RJ45

connection, the pin assignment of the patch

cable is shown below:

M12-to-RJ45 Ethernet Cable Wiring

For Gigabit Ethernet M12 A-Code to RJ45 connection, the pin assignment of the patch

cable is shown below:

Gigabit M12-to-RJ45 Ethernet Cable Wiring

M12-to-RJ45 Ethernet Cable Wiring

3.3.2. Assembly of Rugged RJ45 Connector

The RJ version provides robust connection by the

eld assembly capable rugged RJ45 connector.

Each component of the connector is shown below:

3.3.2-1 Rugged RJ45 Connecter Components

Follow the steps to assemble the rugged RJ45 connector:

M12-to-RJ45 Ethernet Cable Wiring

RJ45 Cable color code

Following picture-19 shows the color code of Cat.-5E UTP/STP cable based on the two

standards released by TIA/EIA – 568A and 568B. The 568B wiring is by far, the most

common wiring method. You can choose the method that suits your application; but

ensure that both ends of the cable use the same standard.

4. Device Management

4.1 Preparation for console management

Attach the RS-232 DB9 connector to your PC’s COM port. Connect the M12 A-code 5-pin

connector to the console port of the JetNet 6710G/6810G.

JetNet 6710G / 6810G series switches provide both in-band and out-band configuration

methods. You can congure the switch via the RS232 console with the attached console

cable, or you can remotely manage the switch via network using Telnet/SSH, Web/HTTPS

management.

3.4 Wall /Panel Mounting Installation

The JetNet 6710G/6810G series are shipped with 1 set mounting bracket which allows users

to install JetNet 6710G/6810G on the panel or wall. Assemble the brackets on the rear side

of JetNet 6710G/6810G body, then using a suitable screw install onto wall / panel of cabinet

with good heat dissipation.

4.1.1 Go to Start -> Program -> Accessories -> Communication -> Hyper Terminal

4.1.2 Give a name to the new console connection to create a new serial communication

session.

4.1.3 Choose the COM name, and select the correct serial settings. The serial settings of

JetNet 6710G/6810G are as below:

Baud Rate: 9600 / Parity check: None / Data Bit: 8 / Stop Bit: 1

4.2 Preparation for Web management

Before you attempt to use the embedded web interface to manage switch operation, verify

that your JetNet switch is properly installed on your network and that every PC on this

network can access the switch via the web browser.

4.2.1 Launch the web browser (Internet Explorer or Mozilla Firefox) on the PC.

4.2.2 Type http:// 6710G_IP_Address or 6810G_IP_Address (The default IP address is

192.168.10.1.), then press Enter.

4.2.3 The login screen will appear next. Type-in the user name and the password. The

default user name and password is admin/admin.

4.2.4 Click OK, and then the welcome page of the web-based management interface will

appear.

At the left column of the Web management interface are listed the available software

features; by pressing the ring column you can also view the detailed conguration

interface.

For more detailed management features please refer to the software’s users’ manual. The

software user manual can be downloaded from Korenix Website as below:

http://www.korenix.com/downloads.htm

4.1.4 After connected, you can see Switch login request. Type-in the username and

password to login. The default username is “admin”, password is “admin” for console

interface.

4.1.5 Follow the manual to congure the device features.

1. 概要

JetNet 6710G/6810G系列是一款网管型PoE以太网交换机，配有8个可提供30W/15.4W的

10/100 TX PoE供电端口和2个千兆上联网口。

通过软件设置或LLDP自动检索功能，JetNet 6710G系列的8个10/100 TX PoE供电端口可以提

供满足IEEE 802.3af标准的15.4W电量输出，以及满足IEEE 802.3at标准的30W高电量输出。

此外，JetNet 6810G系列配备的8个满足IEEE 802.3af标准的供电端口，支持科洛理思PoE升

压专利技术。交换机藉由此技术允许24~57VDC电源输入范围，却提供48V电源输出及15.4W

电量输出。适用于机器设备需要48V电源输入，却因现场安装限制无提供48V的应用。2个

千兆以太网口提供高速上联通道，连接满足Korenix MSRTM专利冗余技术的高层主干交换机。

Korenix MSRTM技术可以在5ms之内处理网络中断恢复通讯。在持续振动和冲击的环境中，交

换机配备坚固的工业D-Code M12接头或RJ45接头，能提供异常牢固的以太网和PoE连接。

1-1 产品清单

JetNet 6000G系列包含以下物品，如有缺少或破损，请与供应商联系

JetNet 6710G 网管型IEEE802.3at高功率PoE

工业以太网交换机 (M12/ Rugged RJ)

JetNet 6810网管型可升压PoE以太网交换机

(M12/ Rugged RJ)

M12on DB9Shielded Console Cable

Rugged M12D-coded 4-pole

Field Assemble able Connecter

Rugged M12A-coded 8-pole

Field Assemble able Connector

Rugged RJ45 Field Assemble

able Connecter

2个壁挂安装配件及8个螺丝

快速安装向导

CD 光盘

JetNet

6710G-M12

JetNet

6710G-RJ

JetNet

6810G-M12

JetNet

6810G-M12

11 1 1

1 1

10 10

Andere Handbücher für JetNet 6710G

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Korenix Netzwerk-Router Handbücher

Korenix

Korenix JetNet 3006 Series Bedienungsanleitung

Korenix

Korenix JetBox 9430 Bedienungsanleitung

Korenix

Korenix JetNet 5628G Series Bedienungsanleitung

Korenix

Korenix JetNet 6910G-M12 Series Bedienungsanleitung

Korenix

Korenix JetBox9500 series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

Korenix

Korenix JetBox 9462-w Bedienungsanleitung

Korenix

Korenix JetNet 5728G-24P Series Bedienungsanleitung

Korenix

Korenix JetBox 5630 Bedienungsanleitung

Korenix

Korenix JetNet 5010G Series Bedienungsanleitung

Korenix

Korenix JetNet 5010G Series Bedienungsanleitung

Korenix

Korenix JetNet 7850G-2XG Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

Korenix

Korenix JetNet 5020G Series Bedienungsanleitung

Korenix

Korenix JetNet 5008G-P Series Bedienungsanleitung

Korenix

Korenix JetNet 7852G-4XG Series Bedienungsanleitung

Korenix

Korenix JetNet 3008 v3 Bedienungsanleitung

Korenix

Korenix JetNet 5310G Bedienungsanleitung

Korenix

Korenix JetNet 6059G Bedienungsanleitung

Korenix

Korenix JetNet 3705 Bedienungsanleitung

Korenix

Korenix JetNet 5628G Series Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Korenix

Korenix 4510 Bedienungsanleitung

Korenix

Korenix JetWave 4020 Series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung

Dynacord

Dynacord Promatrix 6000 Bedienungsanleitung