Korenix JetNet 6524G Bedienungsanleitung
JetNet 6524G Series
24-Port Gigabit Stackable Layer 3 Managed
Ethernet Switch
Quick Installation Guide
www.korenix.com
V1.0
Introduction
The JetNet 6524G is a 19-inch Gigabit Stackable Layer 3 Managed Switch, equipped with 24
10/100/1000 Base-TX ports and 4 Gigabit SFP combo ports delivering maximum throughput
and flexibility for high-density and ultra-high-speed connection. With stacking cable
installation, up to 8 units can be stacked together, allowing building a single-IP manageable
device and simultaneously providing 40G backplane across full duplex stacking links. The
ÀH[LEOHLQWHUIDFHGHVLJQDOORZV-HW1HW*WRSURYLGHXSWR*LJDELWSRUWVSHUVWDFN
and 384G bandwidth for building intelligent large-scale networks.
In addition to the 90-264VAC power-based JetNet 6524G model, Korenix provides the JetNet
6524GDC series, which support 24V or 48V power inputs and feature a FAN-less design with
-40~65OC wide operating temperature for severe industrial applications.
8QSDFNWKHER[\RXZLOO¿QG
The Rack Mount Managed Ethernet Switch
RS-232 DB9 (Null-Modem) console cable
Rack Mount kit
Power Cord (Depend on Country, JetNet 6524G-DC no Power Cord)
QIG
2.Interface Introduction
Hardware Installation
2.1 Front-Panel Components: The front panel of the Switch consists of LED indicators,
Gigabit Ethernet ports and four SFP (Mini-GBIC) Combo ports.
Comprehensive LED indicators display the status of the startup Self-test/Power, Status (of
the stacking master) and the port Link/Activity.
2.2 LED Indicators: The LED indicators of the front panel include Power, Console, and
Ethernet Port Link/Act.status. A bank of 24 LEDs (2 for each port) indicates link, activity
status, and connection speed for each port.
In the Real panel, the LEDs indicate the Stacking status. A band of 8 ports (4 for each
stacking port) indicates Status, RX, TX, Link of the 2 stacking ports.
21 22 23 24
21
22
23
24
Module
Link/Act
181614 20 22 24
171513 19 21 23
Link/Act
6428 10 12
5317 91 1
Orange
Green
Off
: 1Gbps
: 100Mbps
: 10Mbps
Power/
Self-test
Status
24G Rackmount Layer3
Managed Ethernet Switch
6524G
The AC power connector is a standard three-pronged connector that supports the power
cord. Plug the female connector of the provided power cord into this socket, and the male
side of the cord into a power outlet. The Switch automatically adjusts its power setting to
any supply voltage in the range from 100 ~ 240 VAC at 50 ~ 60 Hz.
The stacking connector is a standard CX4 type with 10G full duplex transmission
capability. There are Status, TX, RX and Link LED to indicate the status.
DC Power Input apply to the JetNet 6524G-DC
Follow below steps to wire JetNet 6524G-DC redundant DC power inputs. The power
range support 24V(18-36VDC) or 48V(36-72V) DC input. Choose the power input model
you preferred.
Note 1: It is a good practice to turn off input and load power, and to unplug power terminal
block before making wire connections. Otherwise, your screwdriver blade can inadvertently
short your terminal connections to the grounded enclosure.
Note 2: The range of the suitable DC electric wire is from 12 to 24 AWG.
2.3 Rear Panel Description: The rear panel of the Switch contains anAC power connector
or DC power connector, a RS-232 console port, the connector for the two stacking ports.
An RS-232 DCE console port is for setting up and managing the Switch via a connection
to a console terminal or PC using a terminal emulation program. The default baud rate is
115,200, N, 8, 1.
100-240V~, 50/60HZ
Console
115200,N,8,1
1
21
2
10G / Stack
Status
RX
TX
Link
1. Insert positive and negative wires into V+ and V- contacts
respectively of the terminal block connector
2. Tighten the wire-clamp screws to prevent DC wires from being
loosened.
3. Power 1 and Power 2 support power redundancy and polarity
reverse protection functions.
4. Positive and negative power system inputs are both accepted,
but Power 1 and Power 2 must apply the same mode.
3. Mount the Switch to 19’’ rack
3.1 Attach the brackets to the device by using the screws provided in the Rack Mount kit.
3.2 Mount the device in the 19’ rack by using four rack-mounting screws provided by the
rack manufacturer.
3.3 When installing multiple switches, mount
them in the rack one below the other.
4. Stacking the Switches: A total of 8 switches can be put into a single stack. Stacked
JetNet 6524G Switches can be assigned a single IP address using the switch's
management software. The stack can then be treated as a single manageable unit with one
IP address.
1. Make sure all switches in the stack are powered off.
2. Connect switches through the HighGig ports in the backplane.
3. Power on the switches.
4. The Link LED in the rear panel indicates the link status of the stacking port.
Note: Korenix provide the stacking cable for purchasement. When the volume of the
stack is under 4, the JNSC-CX405M-S, 50cm stacking cable is enough. When the volume
is above 4, additional one JNSC=CX401M-S, 100cm stacking cable is required for the
connection from the unit 1 to the last unit.
Note: Check if the rack environment
WHPSHUDWXUHFRQIRUPVWRWKHVSHFL¿HG
operating temperature range. Do not
place any equipment on top of the
switch and please properly grounded.
$IWHU\RXKDYHVXFFHVVIXOO\LQVWDOOHGWKH6ZLWFK\RXFDQFRQ¿JXUHWKH6ZLWFKPRQLWRU
the LED panel, and display statistics graphically using a Web browser, such as Netscape
Navigator (version 6.2 and higher) or Microsoft® Internet Explorer (version 5.0).
7KHGHIDXOW,3DGGUHVVEHIRUHFRQ¿JXULQJLV8VHU1DPHLVDGPLQQRGHIDXOW
password is requested.
$IWHUFRQ¿JXUHGWKHOD\HUYLWXDOLQWHUIDFHV\RXFDQDVVLJQSULPDU\,3DQGVHFRQG,3
addresses to the interface, this is known as default gateway of the lower hosts. The lower
hosts in each subnet can access the interface by the default gateway IP address.
The default IP address is only available in layer 2 mode, the layer 2 mode means there is
QRDQ\FRQ¿JXUHGOD\HUYLUWXDOLQWHUIDFH$IWHUFRQ¿JXUHGWKHOD\HUYLUWXDOLQWHUIDFHWKH
default IP address is changed to the assigned primary/second IP address of the interface.
NOTE: To access the Switch through a Web browser, the computer running the Web
browser must have IP-based network access to the Switch. It is not suggested multiple
user’s access to the web browser. The performance of web display would be affected.
Warning: Since the lower hosts under the layer 3 interface can access the switch by
default gateway IP address. Please remember to change the user name and password
LQ\RXU¿UVWORJLQ2WKHUZLVHWKHXVHUVFDQHDVLO\DFFHVVWKHPDQDJHPHQWLQWHUIDFHDQG
change the settings. It obeys the common security concern.
You can also connect a computer or terminal to the serial console port or use Telnet to
access the Switch. The command-line-driven interface provides complete access to all
switch management features.
Device Management
The system may be managed out-of-band through the console port on the rear panel or in-
band using Telnet, a Web Browser, or SNMP.
1. Web-based Management Interface
2. Command Line Console Interface Through the Serial Port or Telnet
You can manage the Switch with an SNMP-compatible console program. The Switch
supports SNMP version 1.0, version 2.0, and version 3.0. The SNMP agent decodes
the incoming SNMP messages and responds to requests with MIB objects stored in the
database. The SNMP agent updates the MIB objects to generate statistics The Switch
supports a comprehensive set of MIB extensions:
RFC1643 Ether-like MIB
RFC1493 Bridge
RFC 2819 RMON
RFC2233 Interface MIB
RFC2571 (SNMP Frameworks)
RFC2572 (Message Processing for SNMP)
RFC2573 (SNMPApplications)
RFC2576 (Coexistence between SNMPs)
RFC2618 (Radius-Auth-Client-MIB)
RFC2620 (Radius-Acc-Client-MIB)
RFC 1724 (RIPv2-MIB)
RFC 1850 (OSPF-MIB)
RFC 1850 (OSPF-TRAP-MIB)
RFC 2787 (VRRP-MIB)
RFC 3289 - DIFFSERV-DSCP-TC
RFC 3289 - DIFFSERV-MIB
QOS-DIFFSERV-EXTENSIONS-MIB
QOS-DIFFSERV-PRIVATE-MIB
RFC2674 802.1p
RFC 2932 (IPMROUTE-MIB)
ROUTING-MIB
MGMD-MIB
RFC 2934 PIM-MIB
DVMRP-STD-MIB
IANA-RTPROTO-MIB
MULTICAST-MIB
Korenix Customer Service
KoreCARE is Korenix Technology’s global service center, where our professional staffs are
ready to answer your questions at any time.
3. SNMP-Based Management
Ᾰ䘦
JetNet 6524Gᱥжⅴ19㤧ሮᵰᕅޞݼL3㖇㇗ශӚᦘᵰθ䞃༽24Ѡ10/100/1000 Base-TX
ㄥૂ4ѠݼSFP comboㄥθᨆבᴶཝ䠅ૂ⚫⍱ᙝθ┗䏩儎ㄥᇼᓜૂ儎䙕䘔㓵
䴶≸Ⱦֵ⭞ḽ䞃Ḿ㓵㔼θᴶཐᰬሼ8䇴༽ᡆжѠঋIP䇴༽θ䙐䗽ޞᐛḾ㓵㔼
ӈ䘔θᨆב儎䗴40G㜂ᶵᑜᇳȾ⚫⍱Ⲻ䇴䇗θֵ∅жѠJetNet 6524GḾᨆב192Ѡ
ݼㄥૂ384GᑜᇳθԛࡑᔰᲰ㜳ཝශ㖇㔒Ⱦ
䲚Ҽ90-264VACב⭫Ⲻ儎ুӚ⍷⡾ᵢ(JetNet 6524G)θKorenix䘎ᨆב᭥ᤷ24Vᡌ48Vב⭫Ⲻᰖ
伄քু⍷⡾ᵢ(JetNet 6524GDC)θᐛ֒ᓜ㤹പ: -40~65đ䘸⭞ᚬࣙⲺᐛѐ⧥ູȾ
1. ᢉᔶ㻻Ỷḛ䞃Ԭ
ᵰᕅ㖇㇗ශӚᦘᵰ
RS-232 DB㓵㔼
ᵰᆿ㻻䞃Ԭ
⭫Ⓠ㓵(דᦤуളᇬ㿺㤹)
QIGᘡ䙕ᆿ㻻ሲ
2. ⮂䶘ԁ㔃
⺢Ԭᆿ㻻
CH
2.1ࢃᶵ㓺ԬφӚᦘᵰࢃ䶘ᶵφLED⽰⚥Ƚԛའ㖇ȽѠSFP(Mini-GBIC)
ComboȾ
LEDᱴ⽰㠠Ỷ/⭫ⓆȽ⣬ᘷδStacking MasterεૂㄥLink/ActiveȾ
2.2 LED⽰φࢃ䶘ᶵⲺLEDᤢθ⭫ⓆȽConsoleૂԛའ㖇Link/Aact statusȾ24ѠLED
δ∅Ѡㄥ2Ѡ⽰⚥ε⽰䘔Ƚ◶⍱⣬ᘷૂㄥ䙕⦽Ⱦ8ѠLED⽰⚥θδ∅Ѡ
4Ѡε⽰⣬ᘷθRXȽTXȽњѠ⁗ඍҁ䰪䘔Ⱦ
2.3 ᶵ㓺ԬφӚᦘᵰ䶘ᶵᤢφ⭫ⓆACᡌDC䘔ȽRS-232ȽњѠḾȾ
1ѠRS232 DCEㄥθᯯ䙐䗽㓵㔼䘔Ӛᦘᵰθ൞PCр䘆㺂䎻㓝㓾ㄥθⲱᖋ
Ӛᦘᵰᒬᇂᡆࣕ㜳䇴㖤Ⱦ唎䇚ⲺѨ৸ᮦѰφ115,200, N, 8, 1.
21 22 23 24
21
22
23
24
Module
Link/Act
181614 20 22 24
171513 19 21 23
Link/Act
6428 10 12
5317 91 1
Orange
Green
Off
: 1Gbps
: 100Mbps
: 10Mbps
Power/
Self-test
Status
24G Rackmount Layer3
Managed Ethernet Switch
6524G
100-240V~, 50/60HZ
Console
115200,N,8,1
1
21
2
10G / Stack
Status
RX
TX
Link
AC⭫Ⓠ䟽⭞ḽп⭫Ⓠθ䞃༽⭫Ⓠ㓵Ⱦሼḽ䞃⭫Ⓠ㓵Ⲻfemaleཪᨈޛп亯⭫Ⓠᨈ
″θሼ⭫Ⓠ㓵Ⲻmaleㄥࡦཌ䜞⭫ⓆȾӚᦘᵰᴪޭཌ䜞⭫Ⓠ㠠࡚ࣞᯣ䈹᮪ᐛ֒⭫ুθ⭫
ু㤹പᱥ100 ~ 240 VAC(50 ~ 60 Hz)Ⱦ
ḾᱥḽⲺCX4θޭ༽10GޞᐛՖ䗉㜳࣑Ⱦ ཌθӚᦘᵰ䘎ᨆב⣬ᘷθTXθ
RXૂLink LED⽰⚥Ⱦ
JetNet 6524G-DCⲺ⭫Ⓠ䗉ޛ
ṯᦤྸс↛僚ѰJetNet 6524G-DC䘔ߍ֏DC⭫ⓆȾDC⭫Ⓠ䗉ޛ㤹പφ24V(18-36VDC)ᡌ
48V(36-72V)Ⱦ
༽⌞ 1: ൞䘔㓵ҁࢃθ䈭ީ䰣⭫Ⓠθᒬሼ㓵ㄥᆆᤊсȾࡏθᛞⲺ㷰ѓ࠶㜳䙖ᡆ㓵ㄥ
ᆆф൦㓵⸣䐥Ⱦ
༽⌞2: 䘸⭞⭫Ⓠ㓵㤹പ12Њ24 AWG.
1. ሼ⭫ⓆⲺ↙䍕ᶷ伔ࡡᨈޛ㓵ㄥᆆⲺV+ ૂV- ᨈ″
2. ᤝ㍝㓵㷰ѓθ䱨↘DC⭫Ⓠ㓵㝧㩳
3. Power 1ૂPower 2᭥ᤷߍ֏⭫Ⓠ䗉ޛૂᶷᙝؓᣚ
4. ᭥ᤷ↙䍕⭫Ⓠ㌱㔕䗉ޛθռPower 1ૂPower 2ᗻ亱ֵ⭞
ж⁗ᕅ
3. ሼӚᦘᵰ㻻р19㤧ሮᵰ
3.1 ⭞㷰ѓሼ㙩㘲രᇐࡦӚᦘᵰњם
3.2 ⭞ᵰᆿ㻻㷰ѓሼӚᦘᵰ㻻р19㤧ሮᵰ
3.3 䴶㾷ᆿ㻻ཐӚᦘᵰᰬθԄрᖶсжቸቸരᇐ
༽⌞: Ỷḛᵰ⧥ູᓜᱥ൞㿺Ṳ
㤹പθу㾷᭴㖤Ա⢟൞Ӛᦘᵰ京
䜞θ䈭↙⺤൦Ⱦ
4. Ӛᦘᵰ: ∅ѠḾᇯ㓩8ӚᦘᵰȾJetNet 6524G㻡ᇐѿঋжIP൦൶θཐӚᦘᵰ
㓺ᡆⲺḾθ㻡㿼Ѱж㖇㇗ශӚᦘᵰθ䙐䗽ঋжIP൦൶䘑㺂㇗⨼Ⱦ
1. ⺤ᇐᡶᴿӚᦘᵰ⭫Ⓠ䜳༺ӄީ䰣⣬ᘷ
2. 䙐䗽нݼḾ䘔Ӛᦘᵰ
3. ᢉᔶӚᦘᵰ⭫Ⓠ
4. 䶘ᶵⲺLED⚥ᱴ⽰Ḿ䘔㓵⣬ᘷ
༽⌞: KorenixᨆבḾ㓵㔼ב䘿䍣Ⱦᖉ
䇴༽ᮦ䠅ቅӄ4θࡏ50cmḾ㓵㔼
JNSC-CX405M-S┗䏩㾷≸Ⱦᖉ䇴
༽ᮦ䠅䎻䗽4θࡏ䴶㾷⭞ࡦ100cmḾ
㓵㔼JNSC=CX401M-SȾ
↙⺤ᆿ㻻Ӛᦘᵰθ⭞ᡭࡏԛᔶခ䇴㖤Ӛᦘᵰθ㿸ሕLED⽰⚥⣬ᘷθ䙐䗽Web
⎅㿾ಞᱴ⽰㔕䇗ᮦᦤȾ⎅㿾ಞྸNetscape Navigator (version 6.2ᡌᴪ儎⡾ᵢ)ᡌ㘻
Microsoft®Internet Explorer (version 5.0)
唎䇚IP൦൶ᱥ192.168.2.1. ⭞ᡭᱥadmin, 唎䇚ᇼ⸷ᱥグȾ
䇴㖤ླL3㲐ᤕㄥԛθ⭞ᡭᇐѿѱIPૂԄIPθሼ֒Ѱсቸ䇴༽Ⲻ唎䇚㖇ީȾѠᆆ㖇
Ⲻсቸ䇴༽θ䙐䗽唎䇚㖇ީIP䇵䰤䈛ㄥȾ
唎䇚IP൦൶ӻ൞L2⁗ᕅᴿ᭾θL2⁗ᕅᝅᵠሯӚᦘᵰ䘑㺂ԱL3㲐ᤕㄥᇐѿȾᇂᡆL3
㲐ᤕㄥ䇴㖤θ唎䇚IP൦൶ᴪѰᇐⲺѱ/ԄIP൦൶Ⱦ
༽⌞φ䙐䗽Web⎅㿾ಞ䇵䰤Ӛᦘᵰᰬθ䘆㺂Web⎅㿾ಞⲺ⭫㝇䴶ᴿᵹ䲆䇵䰤ӚᦘᵰȾуᔰ
䇤ཐ⭞ᡭᰬ䙐䗽Web䇵䰤ӚᦘᵰθWebᱴ⽰᭾㜳ՐᖧଃȾ
䆜: ᖉсቸѱᵰ䙐䗽唎䇚㖇ީIP൦൶䇵䰤Ӛᦘᵰᰬθ䈭⌞ᝅᴪ᭯⭞ᡭૂᇼ⸷Ⱦࡏ⭞
ᡭ䖱᱉ⲱᖋ㇗⨼⮂䶘θᒬᴪ᭯䇴ᇐȾ䘏⎿ᑮ㿺ᆿޞ䰤从Ⱦ
䇴༽㇗⨼
Ӛᦘᵰ䶘ᶵⲺㄥ᭥ᤷout-bandᑜཌ㇗⨼θҕ᭥ᤷTelnetθWeb⎅㿾ಞૂSNMP䘑㺂
in-bandᑜ㇗⨼Ⱦ
1. Web㇗⨼⮂䶘
ᡭሼ⭫㝇ᡌ㓾ㄥ䘔ࡦѨ㺂ㄥθᡌ䙐䗽Telnetᯯᕅᇔ⧦ળԚ㺂ⲱᖋȾળԚ㺂⮂䶘
ᨆבޞ䶘ⲺӚᦘᵰࣕ㜳㇗⨼Ⱦ
2. 䙐䗽ѨᡌTelnet䘑㺂ળԚ㺂䇵䰤
⭞ᡭԛֵ⭞SNMPぁᓅ㇗⨼ӚᦘᵰȾӚᦘᵰ᭥ᤷSNMP version 1.0θversion 2.0ૂ
version 3.0ȾSNMP agent䀙⸷ՖޛⲺSNMPؗᚥθ侾MIBሯ䊗ٲᆎޛؗᚥᓉȾSNMP
agentᴪ᯦MIBሯ䊗⭕ᡆ㔕䇗ᮦᦤȾӚᦘᵰ᭥ᤷޞ䶘ⲺMIBᢟኋφ
RFC1643 Ether-like MIB
RFC1493 Bridge
RFC 2819 RMON
RFC2233 Interface MIB
RFC2571 (SNMP Frameworks)
RFC2572 (Message Processing for SNMP)
RFC2573 (SNMPApplications)
RFC2576 (Coexistence between SNMPs)
RFC2618 (Radius-Auth-Client-MIB)
RFC2620 (Radius-Acc-Client-MIB)
RFC 1724 (RIPv2-MIB)
RFC 1850 (OSPF-MIB)
RFC 1850 (OSPF-TRAP-MIB)
RFC 2787 (VRRP-MIB)
RFC 3289 - DIFFSERV-DSCP-TC
RFC 3289 - DIFFSERV-MIB
QOS-DIFFSERV-EXTENSIONS-MIB
QOS-DIFFSERV-PRIVATE-MIB
RFC2674 802.1p
RFC 2932 (IPMROUTE-MIB)
ROUTING-MIB
MGMD-MIB
RFC 2934 PIM-MIB
DVMRP-STD-MIB
IANA-RTPROTO-MIB
MULTICAST-MIB
Korenixᇘᡭᵃࣗ
KoreCAREᱥ〇⍑⨼ᙓ〇ᢶޞ⨹ᵃࣗѣᗹθᡇԢщѐⲺᢶᵥӰ䳅ᰬ༽䀙ㆊᛞⲺ⯇䰤Ⱦ
〇⍑⨼ᙓޞ⨹ᇘᵃѣᗹEmail൦൶Ѱ: [email protected]
3. SNMP㇗⨼
Andere Handbücher für JetNet 6524G
1
Inhaltsverzeichnis
Sprachen:
Andere Korenix Schalten Handbücher
Korenix
Korenix JetNet 3005G Bedienungsanleitung
Korenix
Korenix JetNet 3008f v3 Bedienungsanleitung
Korenix
Korenix JetNet 7628X Series Bedienungsanleitung
Korenix
Korenix JetNet 3018G Series Bedienungsanleitung
Korenix
Korenix JetNet 5010G Series Bedienungsanleitung
Korenix
Korenix JetNet 3808G-M12 Series Bedienungsanleitung
Korenix
Korenix JetNet 3810G Series Bedienungsanleitung
Korenix
Korenix JetNet 5728G series Bedienungsanleitung
Korenix
Korenix JetNet 3210GP-2C Bedienungsanleitung
Korenix
Korenix JetNet 7850G-2XG Bedienungsanleitung
Korenix
Korenix JetNet 5428G-20SFP Series Bedienungsanleitung
Korenix
Korenix JetNet 4508 Bedienungsanleitung
Korenix
Korenix JetNet 6059G Bedienungsanleitung
Korenix
Korenix JetNet 5428G Series Bedienungsanleitung
Korenix
Korenix JetNet 701 Bedienungsanleitung
Korenix
Korenix JetNet 7020G Bedienungsanleitung
Korenix
Korenix JetNet 5310G Bedienungsanleitung
Korenix
Korenix JetNet 3810G Series Bedienungsanleitung
Korenix
Korenix JetNet 7310G Series Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
