Koso EX-01 Bedienungsanleitung

wh049ba01a

M3XP0.5

screw nut

Velcro X1 set

警告!

For proper installation, please follow the steps described below. Any damage caused by a wrong installation shall be imputed to the users.

●

Do not cut or modify the wire. To avoid short circuit, do not pull the wire off the connector when installing the meter.

●

Do not disassemble or change any parts

●

Opening the instrument will void any warranty. Maintenance or repair should be executed by our professionals only.

●

◎MARK MEANING:

WARNING!

CAUTION!

Some procedures must be followed to avoid damage caused by wrong installation.

Some procedures must be followed to avoid injuries.

Some procedures must be followed to avoid any damage to the vehicle.

PRESS THE

BUTTON

ONCE

PRESS THE

BUTTON 3

SECONDS

Kit content

Meter X1

M3X10XP0.5

screw

M3 washer

Please contact your local distributor if the items received are not the same as the ones listed above.

2-1

2-2

RPM / Hour Meter

Installation instruction

Installation steps

1. Engine hour meter (Accessory 1)

2. M3 screw (Accessory 2)

3. M3

washer

(Accessory 3)

4. M3 screw nut (Accessory 4)

1. Engine hour meter (Accessory 1)

2. Velcro

Male (Accessory 5)

3. Velcro

Female (Accessory 5)

Choose either Method A or B according to your need.

Wiring installation instruction

Brown / RPM wire

Connect the RPM wire

according to one of the

three positions shown on

(B). the models.

Spark plug wire

For motorcycle with ignition coil system, the RPM can be

installed following the methods here described. Wrap the

RPM wire at least 5 times around the spark plug cap as

shown below.

Thank you for purchasing our Koso EX-01 engine hour meter. Please read carefully the instruction sheet and keep it for future

Notice

26.8 mm

14.9 mm

42.8 mm

●

Design and specifications are subject to change without notice!

Specifications

Functions instruction

While on Total Engine Hour screen, press

the button once to enter the Engine Hour A.

In Engine Hour A, press the button once to

enter the Engine Hour B.

While on Engine Hour B, press the button

once to enter the Total Engine Hour.

Holding the button for 3 seconds will reset

the Engine Hour A record.

Display range : 0~9999 H

Display unit : 1 H

●Totalenginehour meter

Display range : 0.0~999.9 H

Display unit : 0.1 H

●Hour meterA/B

When the engine hour meter starts to

count, the “ t ’ symbol will flash every

0.5 second. Holding the button for 3 seconds will

reset the Engine Hour B record.

症狀

Troubleshooting

The meter will automatically turn off if no button is pressed or if there is no signal input for more than 30 seconds.

The followingsituation does not necessarily indicate a malfunction to the meter. Check the following before takingitin for warranty.

Problem

The digits do not appear or

appear incorrectly.

※If the problem can still notbe solved, please contact your local distributor.

Check if the RPM wire is connected properly.

The meter ran out of battery and shall be replaced.

Diagnosis

-10~60

JIS D 0203

●Effective temperature range

●Internal battery type

●Meter weight

●Meter size

●Meter standard

●Battery life time About 350 hours

+ or - 19g

CR 2032

W42.8 X L26.8 XH14.9 mm

About 5 years

●Battery self-consumed life time

℃

wh049ba01a

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung