Kramer TOOLS 900xl Bedienungsanleitung

900XL Quick Start

P/N:

2900- 301281QS

Rev:

Scan for full manual

900XL Quick Start Guide

This guide helps you install and use your 900XL for the first time.

Go to www.kramerav.com/downloads/900XL to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s in the box

900XL Stereo Power Amplifier

4 Rubber feet

1 Bracket set

Power adapter (12V DC)

1 Quick start guide

Step 2: Get to know your 900XL

Feature

Function

12V DC Connector

+12V DC for powering the unit

RS-232 Tx Rx G Terminal Block Connector

Connect to PC

L+ L–R+ R–OUT Terminal Block Connector

Speaker output

IN 2 RIGHT RCA Connector

Connect to stereo audio right input of source 2

IN 2 LEFT RCA Connector

Connect to stereo audio left input of source 2

IN 1 3.5mm Mini-jack Connector

Connect to stereo audio input of source 1

INPUT 1 Button

Selects the input from audio source 1

INPUT 2 Button

Selects the input from audio source 2

VOLUME –Button

Decreases output volume

VOLUME + Button

Increases output volume

OVER LED

Illuminates red when device is overheating and mutes output

ON LED

Illuminates green when receiving power

Step 3: Mount 900XL

Install 900XL using one of the following methods:

•Attach the rubber feet and place the unit on a flat surface.

•Fasten a bracket (included) on each side of the unit and attach it to a flat surface

(see www.kramerav.com/downloads/900XL).

•Mount the unit in a rack using the recommended rack adapter

(see www.kramerav.com/product/900XL).

•Ensure that the environment (e.g., maximum ambient temperature &

air flow) is compatible for the device.

•Avoid uneven mechanical loading.

•Appropriate consideration of equipment nameplate ratings should be

used for avoiding overloading of the circuits.

•Reliable earthing of rack-mounted equipment should be maintained.

Step 4: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your 900XL.

To achieve specified extension distances, use the recommended Kramer cables available at www.kramerav.com/product/900XL.

Using third-party cables may cause damage!

Step 5: Connect power

Connect the power cord to 900XL and plug it into the mains electricity.

Safety Instructions (See www.kramerav.com for updated safety information)

Caution:

•For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the

terminal or in the User Manual.

•There are no operator serviceable parts inside the unit.

Warning:

•Use only the power cord that is supplied with the unit.

•Disconnect the power and unplug the unit from the wall before installing.

Step 6: Operate 900XL

You can operate your 900XL using:

•The front panel buttons

•RS-232 serial commands transmitted by a PC, touch screen system, or other serial controller

Using the Front Panel Buttons

To operate the 900XL using the front panel buttons:

1. Press INPUT 1 button or INPUT 2 button to select audio input source.

2. Press VOLUME + and –buttons to adjust the output volume to the speakers.

In the case of output distortion that cannot be corrected using the volume controls, try switching the LEVEL switch on the

underside of the unit from H to L and alter the output using the volume control.

Using Serial Commands

To operate 900XL using serial commands, you need to install Kramer's control software (See www.kramerav.com to Download

control software)

Andere Handbücher für TOOLS 900xl

Inhaltsverzeichnis

Andere Kramer Verstärker Handbücher

Kramer

Kramer TOOLS VP-200N Bedienungsanleitung

Kramer

Kramer VM-24HD Bedienungsanleitung

Kramer

Kramer VM-24H Bedienungsanleitung

Kramer

Kramer 908 Bedienungsanleitung

Kramer

Kramer VM-114H2C Bedienungsanleitung

Kramer

Kramer VM-92 Bedienungsanleitung

Kramer

Kramer VP-8 Bedienungsanleitung

Kramer

Kramer VP-12NHD Bedienungsanleitung

Kramer

Kramer VM-73 Bedienungsanleitung

Kramer

Kramer VS-202YC Bedienungsanleitung

Kramer

Kramer VP-6A Bedienungsanleitung

Kramer

Kramer VM-5ARII Bedienungsanleitung

Kramer

Kramer PT-102VN Bedienungsanleitung

Kramer

Kramer 105VB Bedienungsanleitung

Kramer

Kramer VM-5ARII Bedienungsanleitung

Kramer

Kramer 906 Bedienungsanleitung

Kramer

Kramer VA-16XL Bedienungsanleitung

Kramer

Kramer VS-106 Bedienungsanleitung

Kramer

Kramer VM-5HDxln Bedienungsanleitung

Kramer

Kramer VPM-2 Bedienungsanleitung

Kramer

Kramer TP-50 Bedienungsanleitung

Kramer

Kramer VM-9T Bedienungsanleitung

Kramer

Kramer VP-108 Bedienungsanleitung

Kramer

Kramer Pico TOOLS VM-2HD Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung