Kramer VM-114H2C Bedienungsanleitung

KRAMER ELECTRONICS LTD.

USER MANUAL

MODEL:

VM-114H2C

2 Input 1:4 HDMI DA/2x CAT5

Outputs

P/N: 2900-000644 Rev 8

VM-114H2C – Contents

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instructions 3

2.3 Recycling Kramer Products 3

3Overview 4

3.1 Using Twisted Pair Cable 5

3.2 About the Power Connect™ Feature 5

3.3 Defining the VM-114H2C 5

4Connecting the VM-114H2C 7

4.1 Connecting to the VM-114H2C via RS-232 8

5Operating the VM-114H2C 9

5.1 Acquiring the EDID 9

5.2 Disabling/Enabling Deep Color Support 10

5.3 RS-232 and IR Control and Pass-Through 10

6Wiring the Twisted Pair RJ-45 Connectors 15

7Technical Specifications 16

8Default Communication Parameters 17

9Default EDID 18

10 Protocol 2000 19

10.1 Syntax 19

Figures

Figure 1: VM-114H2C 2 Input 1:4 HDMI DA/2x CAT5 Outputs 5

Figure 2: Connecting the VM-114H2C 2 Input 1:4 HDMI DA/2x CAT5 Outputs 8

Figure 3: VM-114H2C RS-232 Control and Pass-Through 11

Figure 4: VM-114H2C IR Control and Pass-Through Example 1 12

Figure 5: VM-114H2C IR Control and Pass-Through Example 2 13

Figure 6: VM-114H2C IR Control and Pass-Through Example 3 14

Figure 7: TP Pinout Wiring 15

VM-114H2C - Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:

Sierra Products.

Congratulations on purchasing your Kramer VM-114H2C 2 Input 1:4 HDMI DA/

2x CAT5 Outputs, which is ideal for the following typical applications:

Home theater, presentation and multimedia applications

Rental and staging

VM-114H2C - Getting Started

2 Getting Started

We recommend that you:

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

Review the contents of this user manual

Go to http://www.kramerelectronics.com/support/product_downloads.asp

to check for up-to-date user manuals, application programs, and to check if

firmware upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

Do not secure the cables in tight bundles or roll the slack into tight coils

Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

Position your Kramer VM-114H2C away from moisture, excessive sunlight

and dust

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

VM-114H2C - Getting Started

2.2 Safety Instructions

Caution:

There are no operator serviceable parts inside the unit

Warning:

Use only the Kramer Electronics input power wall

adapter that is provided with the unit

Warning:

Disconnect the power and unplug the unit from the wall

before installing

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

aims to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility. For details of Kramer’s recycling arrangements in your particular country

go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

VM-114H2C - Overview

3 Overview

The VM-114H2C 2 Input 1:4 HDMI DA/2x CAT5 Outputs is a switcher/distribution

amplifier for HDMI and TP (twisted pair) signals. It reclocks and equalizes one of

two selectable input signals and distributes it to two HDMI and two TP outputs.

In particular, the VM-114H2C features:

A maximum data rate of 4.95Gbps (1.65Gbps per graphic channel),

6.75Gbps (2.25Gbps per graphic channel) maximum when using HDMI only

Non-volatile memory that reads and stores the default EDID or the EDID

block from one or a mix of the output display devices, so it can then provide

the EDID information to the source even if the display device is not

connected

I-EDIDPro™ Kramer Intelligent EDID Processing™, an intelligent EDID

handling & processing algorithm that ensures Plug and Play operation for

HDMI systems

HDMI support for 3D, Deep Color, x.v.Color™ and 7.1 uncompressed audio

channels (Dolby TrueHD, DTS-HD)

HDCP compliance

LEDs indicating the selected input and active output

IR remote control support and has a remote IR 3.5mm mini jack

12V DC power

Housing in a Kramer desktop enclosure

The VM-114H2C supports a range of:

Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded

BC-DGKat524 cable

Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded

BC-DGKat623 cable

Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded

BC-DGKat7a23 cable

VM-114H2C - Overview

3.1 Using Twisted Pair Cable

Kramer engineers have developed special twisted pair cables to best match our

digital twisted pair products; the Kramer: BC-DGKat524 (CAT 5 24 AWG), the

Kramer: BC-DGKat623 (CAT 6 23 AWG cable), and the Kramer: BC-DGKat7a23

(CAT 7a 23 AWG cable). These specially built cables significantly outperform

regular CAT 5 / CAT 6 / CAT 7a cables.

3.2 About the Power Connect™ Feature

The Power Connect™ feature here means that only one unit in a system, the

transmitter or receiver, needs to be connected to a power source when the

devices are within 60m (197ft) of each other. The Power Connect™ feature

applies as long as the cable can carry power and the distance does not exceed

60m on standard TP cable. (Heavier gauge cable may be used to extend the

Power Connect™ range).

3.3 Defining the VM-114H2C

This section defines the VM-114H2C.

Figure 1: VM-114H2C 2 Input 1:4 HDMI DA/2x CAT5 Outputs

VM-114H2C - Overview

Feature

Function

IR Remote Control Sensor

Sensor for the remote control IR transmitter

IR LED

Lights yellow when receiving signals from the IR

remote control transmitter

REMOTE IR 3.5mm Mini Jack

Connect to a remote IR sensor

EDID Buttons

READ

Button

Press (when one of the input LEDs is flashing to

indicate a selected input) to read the selected EDID

(see Section 5.1)

SELECT

Button

Press repeatedly to cycle through the inputs to select

an input from which to read the EDID. The relevant

LED flashes (see Section 5.1)

OUTPUT 1~4 LEDS

The relevant LED lights green when an acceptor is

connected to the output

Also lights or flashes during EDID setup (see

Section 5.2)

POWER LED

Lights green when the unit receives power

INPUT SELECTOR Button

Press to select an input. The relevant IN 1 HDMI/IN

2 CAT5 LED lights

IN1 HDMI LED

Input LEDs

Lights green when HDMI input 1 is selected

IN2 CAT5 LED

Lights green when the TP CAT 5 input 2 is selected

RS-232 9-pin D-sub (F)

Connector

Connect to a PC or remote controller

12V DC Power Connector

Connect to the +12V DC power adapter, center pin

positive

IN1 (HDMI)

Input HDMI

Connector

Inputs

Connect to an HDMI source

IN2 (CAT5)

Input RJ-45

Connector

Connect to a TP source (for example, PT-571 HDMI

Line Transmitter, VM-114H2C or VM-114H4C)

OUT 1

HDMI

Output

Connectors

Connect to the HDMI acceptors

OUT 2

OUT 3

TP RJ-45

Output

Connectors

Connect to the TP acceptors (for example, PT-572+

HDMI Line Receiver, VM-114H or VM-114H4C)

OUT 4

VM-114H2C - Connecting the VM-114H2C

4 Connecting the VM-114H2C

Always switch off the power to each device before connecting it to your

VM-114H2C. After connecting your VM-114H2C, connect its power

and then switch on the power to each device.

To connect the VM-114H2C as illustrated in the example in Figure 2:

1. Connect the HDMI source (for example, a DVD player) to the IN 1 (HDMI)

connector.

2. Connect the TP source, for example, a PT-571 HDMI Line Transmitter

(another example is the TP-573), another VM-114H2C or a VM-114H4C to

the IN 2 (CAT5) connector.

3. Connect the HDMI OUT connectors to up to two HDMI acceptors, for

example, LCD TV or plasma displays

4. Connect the TP RJ-45 output connectors to up to two TP acceptors, for

example, the PT-572+ HDMI Line Receiver (another example is the TP-574),

the VM-114H or the VM-114H4C.

5. Optional—Plug the remote IR sensor into the front panel remote IR 3.5mm

mini jack.

6. Optional—Connect a PC via RS-232 to the RS-232 port on the VM-114H2C

(see Section 4.1).

7. Connect the power adapter to the power socket on the VM-114H2C and to

the mains electricity (not shown in Figure 2).

8. Optional—Press the EDID READ button to acquire or change the EDID

information (see Section 5.1).

Andere Handbücher für VM-114H2C

Inhaltsverzeichnis

Andere Kramer Verstärker Handbücher

Kramer

Kramer VM-5HDxln Bedienungsanleitung

Kramer

Kramer VM-24HD Bedienungsanleitung

Kramer

Kramer TP-50 Bedienungsanleitung

Kramer

Kramer VA-4 Bedienungsanleitung

Kramer

Kramer VM-10xl Bedienungsanleitung

Kramer

Kramer VM-212DT Bedienungsanleitung

Kramer

Kramer 6601 Bedienungsanleitung

Kramer

Kramer VM-20HDxl Bedienungsanleitung

Kramer

Kramer VM-8DVI-R Bedienungsanleitung

Kramer

Kramer VP-200NAK Bedienungsanleitung

Kramer

Kramer VP-108 Bedienungsanleitung

Kramer

Kramer VM-9T Bedienungsanleitung

Kramer

Kramer PA-50HZ Bedienungsanleitung

Kramer

Kramer VM-5ARII Bedienungsanleitung

Kramer

Kramer PA-150 Bedienungsanleitung

Kramer

Kramer VM-1110 Bedienungsanleitung

Kramer

Kramer VP-200XLN Bedienungsanleitung

Kramer

Kramer VM-3S Bedienungsanleitung

Kramer

Kramer PA-120Net Bedienungsanleitung

Kramer

Kramer 104LN Bedienungsanleitung

Kramer

Kramer 910 Bedienungsanleitung

Kramer

Kramer F-021 Bedienungsanleitung

Kramer

Kramer VM-4HC Bedienungsanleitung

Kramer

Kramer Cobra DA9 Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung