Kramer RC-43SL Bedienungsanleitung

USER MANUAL

MODEL:

RC-43SL

6-Button Room Controller

P/N: 2900-300450 Rev 1 www.kramerAV.com

RC-43SL – Contents

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instructions 2

2.3 Recycling Kramer Products 3

3Overview 4

3.1 Defining the RC-43SL 6-Button Room Controller 5

4Connecting the RC-43SL 6

4.1 Connecting the RS-232 Port 7

4.2 Connecting the Ethernet Port 8

4.3 Connecting the K-NET Port 8

4.4 Installing the Front Panel Buttons 9

4.5 Installing the RC-43SL in the Wall Mounting Box 10

5Configuring the RC-43SL 11

6Technical Specifications 12

Figures

Figure 1: RC-43SL 6-Button Room Controller 5

Figure 2: Connecting the RC-43SL 6-Button Room Controller 7

Figure 3: RS-232 Connection 7

Figure 4: K-NET Pinout Connection 8

Figure 5: Mounting the RC-43SL in a Wall Box 10

RC-43SL - Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 14 groups that are clearly defined by

function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11:

Sierra Video Products; GROUP 12: Digital Signage; GROUP 13: Audio; and

GROUP 14: Collaboration.

Congratulations on purchasing your Kramer RC-43SL 6-Button Room Controller,

which is ideal for the following typical applications:

Controlling multimedia rooms, such as classrooms, auditoriums, conference

rooms, and so on

RC-43SL - Getting Started

2 Getting Started

We recommend that you:

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

Review the contents of this user manual

Go to www.kramerav.com/downloads/RC-43SL to check for up-to-date

user manuals, application programs, and to check if firmware upgrades are

available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

Do not secure the cables in tight bundles or roll the slack into tight coils

Avoid interference from neighbouring electrical appliances that may adversely

influence signal quality

Position your RC-43SL away from moisture, excessive sunlight and dust

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

2.2 Safety Instructions

Caution:

There are no operator serviceable parts inside the unit

Warning:

Use only the Kramer Electronics power supply that is

provided with the unit

Warning:

Disconnect the power and unplug the unit from the wall

before installing

RC-43SL - Getting Started

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims

to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility. For details of Kramer’s recycling arrangements in your particular country go

to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

RC-43SL - Overview

3 Overview

The RC-43SL is a highly versatile, all-in-one extended remote control panel for

control of AV equipment—especially projectors and associated equipment—in any

room (such as classrooms, boardrooms, or auditoriums). It streamlines operations

and simplifies control by integrating audio, video, and computer-video sources into

a centralized system. It features a keypad with six touch-sensitive, backlit buttons.

Using the Kramer K-Config software, each button on the RC-43SL can be

programmed on the room controller with a function, where each function can

combine multiple individual actions.

The RC-43SL features:

6 touch-sensitive, backlit buttons with indicator LEDs

2 bidirectional RS-232 ports to control AV equipment such as projectors,

LCD and PDP displays, power amplifiers, switchers and scalers

3 relay contact closure ports for controlling other room items such as raising

and lowering drapes, the screen or the projector.

IR control - 2 outputs (terminals blocks), 1 sensor

IR learning with one sensor that learns commands from any IR remote

A K-NET™ control channel for connecting compatible user interfaces and

supplying power and control data over a single cable

A USB port for loading device firmware

Configures with K-Config software

Compatibility with Kramer Site-CTRL™ software for network remote control

and management over the Ethernet port

1 gang US wall plate size

RC-43SL - Overview

3.1 Defining the RC-43SL 6-Button Room Controller

This section defines the RC-43SL.

Figure 1: RC-43SL 6-Button Room Controller

Feature

Function

Six Touch-sensitive Buttons

Program button functions on the connected

room controller

Six LEDs

Flash yellow when the button is touched. Each

LED can be custom programmed to light on

specific actions

Ground Terminal Connector

Connects to ground to earth the device

USB Connector

Connects to a computer for unit configuration

and firmware upgrading

ETHERNET RJ-45 Connector

Connects to the PC or other LAN device

through a networking LAN

IR OUT Terminal Blocks

Connect to IR emitter cables (from 1 to 2)

FACTORY DEFAULT Button

Using a small screwdriver, press to perform a

factory reset

IR IN Sensor

Used for IR learning

K-NET Terminal Block

PIN +12V is for powering this (and another)

unit, PIN A (+) PIN and PIN B (-) are for

RS-485, PIN GND is for the ground connection

The ground connection is sometimes connected to the

shield of the RS-485 cable

To supply 12V to another device, connect its 12V power

line to the +12V DC terminal of this device

RS-232 Terminal Blocks

Connect to the RS-232 devices (from 1 to 2)

RELAYS Terminal Blocks

Connect to low-voltage relay-driven devices

(from 1 to 3)

RC-43SL - Connecting the RC-43SL

4 Connecting the RC-43SL

Always switch off the power to each device before connecting it to

your RC-43SL. After connecting your RC-43SL, connect its power

and then switch on the power to each device.

You do not have to connect all the inputs and outputs, connect only

those that are required.

To connect the RC-43SL as illustrated in the example in Figure 2:

1. Connect the RELAY terminal block connectors as follows:

Connect RELAY 1 and 2 to blinds

Connect RELAY 3 to a screen

2. Connect the IR outputs as follows:

Connect IR OUTPUT 1 to DVD player 1

Connect IR OUTPUT 2 to DVD player 2

3. Connect the RS-232 ports as follows:

Connect RS-232 port 1 to a projector

Connect RS-232 port 2 to a display

4. Connect the Ethernet port to a network.

5. Connect the K-NET port to any RC device (in this example, an RC-63D)

over K-NET.

Inhaltsverzeichnis

Andere Kramer Controller Handbücher

Kramer

Kramer 860 Bedienungsanleitung

Kramer

Kramer PL-50 Bedienungsanleitung

Kramer

Kramer SL-10 Bedienungsanleitung

Kramer

Kramer SL-280 Bedienungsanleitung

Kramer

Kramer RC-76R Bedienungsanleitung

Kramer

Kramer RC-2 Bedienungsanleitung

Kramer

Kramer SL-10 Bedienungsanleitung

Kramer

Kramer SL-1N Bedienungsanleitung

Kramer

Kramer SL-12 Bedienungsanleitung

Kramer

Kramer SL-1 Bedienungsanleitung

Kramer

Kramer RC-7B Bedienungsanleitung

Kramer

Kramer SL-14RC Bedienungsanleitung

Kramer

Kramer FC-26LA Bedienungsanleitung

Kramer

Kramer PT-12 Bedienungsanleitung

Kramer

Kramer RC-2C Bedienungsanleitung

Kramer

Kramer RC-52N Bedienungsanleitung

Kramer

Kramer K-NET RC-53D Bedienungsanleitung

Kramer

Kramer RC-13TC Bedienungsanleitung

Kramer

Kramer SL-240C Bedienungsanleitung

Kramer

Kramer FC-18 Bedienungsanleitung

Kramer

Kramer FC-10ETH Bedienungsanleitung

Kramer

Kramer RC-7RL Bedienungsanleitung

Kramer

Kramer RC-76R Bedienungsanleitung

Kramer

Kramer SL-1 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung