Kramer SL-280 Bedienungsanleitung

-280 Quick Start (P/N: 2900-300567QS REV 1)

P/N:

2900- 300567QS

Rev:

Scan for full manual

SL-280 Quick Start Guide

This guide helps you install and use your SL-280 for the first time.

Go to www.kramerav.com/downloads/SL-280 to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s in the box

SL-280 Master / Room Controller

1 Set of rack ears

1 Quick start guide

1 Power cord

4 Rubber feet

Step 2: Get to know your SL-280

# Feature Function

POWER LED

Lights green when powered on.

SERVICE Mini USB Connector

For factory use only.

3 IR Receiver and LED Detects IR signals for IR learning and indicates an active signal by lighting blue.

4 LINK LED Indicates Ethernet activity:

Blue LED on – good connection.

Blue LED flashing – no connection.

Blue LED off – not ready.

5 CONTROL LED Indicates control states:

Green – the control application (brain) is ready and working.

Red – indicates an error in the control application (brain).

SERIAL LEDs (from 1 to 8)

White Tx LEDs and blue Rx LEDs flash to indicate activity on each channel.

7 IR LEDs (from 1 to 8) Blue LEDs indicating IR activity on each channel (the associated LED lights when the

relevant IR port transmits data).

8 I/O LEDs (from 1 to 8) Blue LEDs indicating I/O activity on each channel (the associated LED lights on

Digital Out HIGH, and when Digital In is triggered).

9 RELAY LEDs (from 1 to 8) Blue LEDs indicating relay activity on each channel (the associated LED lights when

the relay is closed).

# Feature Function

10 SERIAL Ports (1-8) Terminal Block Connect to up to 8 serial controlled devices, for Ethernet-to-RS232 bidirectional

tunneling.

IR Ports (1-8) Terminal Block

Connect to up to 8 IR emitters or blasters.

12 I/O Ports (1-8) Terminal Block Connect to up to 8 sensors or devices to be controlled, (for example, a motion

sensor). Port may be configured as a digital input, digital output, or analog input.

13 RELAY Ports (1-8) Terminal Block 6 NO relays and 2 NC relays.

Connect to up to 8 devices to be controlled by relay (for example, a motorized

projection screen).

USB Connector

Connect to a PC to perform a firmware upgrade.

15 ID Button For self-identification over the network.

Press the button to send (broadcast) the Beacon P3K command.

Reply includes: IP address, UDP port number, TCP port number, MAC address,

and Model Name.

16 RESET Button For performing a factory default reset.

17 LAN RJ-45 Connector Connects to a local area network. Indications:

LINK LED lights amber – 1000/100/10MB connection.

DATA LED flashes green – Ethernet data link activity.

18 Power Socket with Fuse and Power

Switch

Connects to mains electricity, powers on and off the device.

Step 3: Install the SL-280

To rack mount the machine attach both ear brackets to the machine (by removing the three

screws from each side of the machine and replacing those screws through the ear brackets)

or place the machine on a table.

Step 4: Connect the inputs and outputs

Always switch OFF the power on each device before connecting it to your SL-280. For best results, we recommend that you always

use Kramer high-performance cables to connect AV equipment to the SL-280.

Step 5: Connect the power

Connect AC power to the rear of the SL-280, switch on its power and then switch on the power on each device.

Andere Handbücher für SL-280

Inhaltsverzeichnis

Andere Kramer Controller Handbücher

Kramer

Kramer RC-7B Bedienungsanleitung

Kramer

Kramer PT-12 Bedienungsanleitung

Kramer

Kramer FC-10ETH Bedienungsanleitung

Kramer

Kramer 860 Bedienungsanleitung

Kramer

Kramer SL-14RC Bedienungsanleitung

Kramer

Kramer PT-12 Bedienungsanleitung

Kramer

Kramer RC-8IR Bedienungsanleitung

Kramer

Kramer SL-10 Bedienungsanleitung

Kramer

Kramer FC-28 Bedienungsanleitung

Kramer

Kramer SL-1N Bedienungsanleitung

Kramer

Kramer RC-7LC Bedienungsanleitung

Kramer

Kramer RC-7B Bedienungsanleitung

Kramer

Kramer RC-76R Bedienungsanleitung

Kramer

Kramer FC-22ETH Bedienungsanleitung

Kramer

Kramer SL-10 Bedienungsanleitung

Kramer

Kramer VA-4H Bedienungsanleitung

Kramer

Kramer SL-12 Bedienungsanleitung

Kramer

Kramer RC-13TC Bedienungsanleitung

Kramer

Kramer KC-Virtual Brain5 Bedienungsanleitung

Kramer

Kramer FC-10ETH Bedienungsanleitung

Kramer

Kramer SL-12 Bedienungsanleitung

Kramer

Kramer SL-1 Bedienungsanleitung

Kramer

Kramer RC-74DL Bedienungsanleitung

Kramer

Kramer FC-26 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung