Kramer FC-26LA Bedienungsanleitung

KRAMER ELECTRONICS LTD.

USER MANUAL

MODEL:

FC-26

Ethernet Controller

P/N: 2900-300463 Rev 4

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instructions 2

2.3 Recycling Kramer Products 3

3Overview 4

3.1 About the Power over Ethernet Feature 6

4Defining the FC-26 Ethernet Controller 7

5Initial Configuration and Use Overview 9

5.1 Configuring the FC-26 Ethernet Controller 9

5.2 Configuring a Virtual Port on the PC 11

5.3 Setting Up an Ethernet Connection on the PC 11

6Connecting the FC-26 12

6.1 Connecting via Ethernet 13

7Remote Operation via the Web Pages 18

7.1 Browsing the Web Pages 18

7.2 Connected Clients Page 20

7.3 Device Settings Page 21

7.4 Communication Page 23

7.5 Serial Port Settings Page 24

7.6 IR Command Learner Page 25

7.7 Security Page 26

7.8 Logs Page 29

7.9 About Us Page 30

8Configuring and Maintaining the FC-26 31

8.1 IR Learning 31

8.2 Resetting to the Factory Default Settings 32

8.3 Upgrading the Firmware 32

9Technical Specifications 33

9.1 Data Handling Performance 34

9.2 Example Bandwidth Calculation 34

10 Default Communication Parameters 35

11 Kramer Protocol 3000 36

11.1 Kramer Protocol 3000 –Syntax 36

11.2 Kramer Protocol 3000 –Command List 39

11.3 Kramer Protocol 3000 –Detailed Commands 40

11.4 Parameters 61

Figures

Figure 1: FC-26 Controlling Devices Remotely Using K-Touch 3.0 over a LAN 5

Figure 2: FC-26 Ethernet Controller Front Panel 7

Figure 3: FC-26 Ethernet Controller Rear Panel 8

Figure 4: Connecting the FC-26 for Initial Configuration 9

Figure 5: Configuring a Remote Connection 11

Contents

Figure 6: Connecting the FC-26 Ethernet Controller 12

Figure 7: Local Area Connection Properties Window 14

Figure 8: Internet Protocol Version 4 Properties Window 15

Figure 9: Internet Protocol Version 6 Properties Window 15

Figure 10: Internet Protocol Properties Window 16

Figure 11: General Info Page 19

Figure 12: Connected Clients Page 21

Figure 13: Device Settings Page 22

Figure 14: Communication Page 23

Figure 15: Serial Port Settings Page 25

Figure 16: IR Command Learner Page 25

Figure 17: Security Page 26

Figure 18: Security Confirmation Popup 27

Figure 19: Authentication Required Popup 27

Figure 20: Security Activated Page 28

Figure 21: Logs Page 29

Figure 22: About Us Page 30

Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 13 groups that are clearly defined by

function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11:

Sierra Video Products; GROUP 12: Digital Signage; GROUP 13: Audio, and

GROUP 14: Collaboration.

Congratulations on purchasing your Kramer FC-26 Ethernet Controller that is ideal

for use with Ethernet/RS-232 interfaces.

Getting Started

2 Getting Started

We recommend that you:

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

Review the contents of this user manual

Use Kramer high performance high resolution cables

Go to http://www.kramerelectronics.com/support/product_downloads.asp

to check for up-to-date user manuals, application programs, and to check if

firmware upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

Do not secure the cables in tight bundles or roll the slack into tight coils

Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

Position your Kramer FC-26 away from moisture, excessive sunlight and dust

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

2.2 Safety Instructions

Caution:

There are no operator serviceable parts inside the unit

Warning:

Use only the Kramer Electronics input power wall

adapter that is provided with the unit.

Warning:

Disconnect the power and unplug the unit from the wall

before installing

Getting Started

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims

to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility. For details of Kramer’s recycling arrangements in your particular country go

to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

Overview

3 Overview

The FC-26 is high-performance, easy-to-use, bidirectional hardware and software

interface system for controlling RS-232 and IR-controllable devices via an Ethernet

LAN.

These Ethernet to serial controllers bridge the gap between Ethernet infrastructures

and serial communication devices by offering bidirectional Ethernet to serial and IR

conversion. All setup and maintenance of the devices is done from built-in Web

pages which are accessible using any common Web browser.

The FC-26 can receive K-Touch Ethernet-based per-IR port or per-serial port

commands and convert them into IR/serial signals on the requested IR/serial port.

Responses are sent back to all Ethernet connected panels.

In particular, the FC-26:

Offers network connectivity that lets you connect a Kramer (or other) device via

its RS-232 port to an Ethernet LAN

Works in conjunction with K-Touch 3 for remote control of devices over an

Ethernet LAN via IR or serial connections, (see Figure 1)

Allows you to control up to two RS-232 devices via Ethernet from a PC, tablet,

smartphone, and so on

Allows you to control a device from multiple Ethernet points (PCs or remote

controllers), via a LAN or the Internet

Has IR learning capabilities

Provides IR ports for device control via IR blasters/emitters

Includes Windows®-based Virtual Port software for setting up virtual ports on a

Supports static or dynamic (DHCP) IP addressing

Can act as a PoE receiver

Has a USB port for upgrading the firmware

Supports remote firmware upgrades via a LAN

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kramer Controller Handbücher

Kramer

Kramer RC-7LC Bedienungsanleitung

Kramer

Kramer FC-18 Bedienungsanleitung

Kramer

Kramer RC-54DL Bedienungsanleitung

Kramer

Kramer RC-8IR Bedienungsanleitung

Kramer

Kramer RC-7RL Bedienungsanleitung

Kramer

Kramer SL-12 Bedienungsanleitung

Kramer

Kramer RC-6IR Bedienungsanleitung

Kramer

Kramer RC-52N Bedienungsanleitung

Kramer

Kramer RC-63DLN Bedienungsanleitung

Kramer

Kramer FC-28 Bedienungsanleitung

Kramer

Kramer RC-13TC Bedienungsanleitung

Kramer

Kramer PT-12 Bedienungsanleitung

Kramer

Kramer SL-10 Bedienungsanleitung

Kramer

Kramer SL-1 Bedienungsanleitung

Kramer

Kramer FC-18 Bedienungsanleitung

Kramer

Kramer FC-10ETH Bedienungsanleitung

Kramer

Kramer FC-10ETH Bedienungsanleitung

Kramer

Kramer RC-63DLN Bedienungsanleitung

Kramer

Kramer PL-50 Bedienungsanleitung

Kramer

Kramer RC-76R Bedienungsanleitung

Kramer

Kramer SL-12 Bedienungsanleitung

Kramer

Kramer SL-1N Bedienungsanleitung

Kramer

Kramer SL-1N Bedienungsanleitung

Kramer

Kramer FC-26 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung