Kramer RC-7B Bedienungsanleitung

Kramer Electronics, Ltd.

USER MANUAL

Models:

RC-7B,

Media / Room Controller

RC-7BE,

Media / Room Controller

Contents

Introduction 1

Getting Started 1

Overview 2

Your RC-7B / RC-7BE 3

4.1

Defining the RC-7B Front Panel 3

4.2

Defining the RC-7BE Front Panel 3

4.3

Defining the RC-7B / RC-7BE Side Panel 5

Using Your Media / Room Controller 7

5.1

Operating the RC-7B / RC-7BE 9

5.2

Using the Macro Buttons 10

5.3

An Example of Operating the RC-7B / RC-7BE 10

Technical Specifications 11

Figures

Figure 1: RC-7B Front Panel 3

Figure 2: RC-7BE Front Panel 4

Figure 3: Side Panel of the RC-7B and RC-7BE (Enlarged View) 5

Figure 4: Side Panel of the RC-7B and RC-7BE 6

Figure 5: RC-7BE (Front Perspective) Configuration 7

Figure 6: RC-7BE (Rear Perspective) Configuration 8

Figure 7: Example of a Typical Setup in the Lecture Auditorium 9

Figure 8: RC-7B / RC-7BE Operation Example 10

Tables

Table 1: RC-7B Front Panel 3

Table 2: RC-7BE Front Panel 4

Table 3: The Commands Configuration 9

Table 4: Technical Specifications of the RC-7B / RC-7BE 11

Introduction

1 Introduction

Welcome to Kramer Electronics (since 1981): a world of unique, creative and

affordable solutions to the infinite range of problems that confront the video, audio

and presentation professional on a daily basis. In recent years, we have redesigned

and upgraded most of our line, making the best even better! Our 500-plus different

models now appear in 8 Groups

, which are clearly defined by function.

Congratulations on purchasing your Kramer RC-7B / RC-7BE media / room

controller, which is designed to let an instructor enter a multimedia

classroom and operate an A/V system with ease.

The package includes the following items:

RC-7B or RC-7BE

This user manual

Power supply

Control and configuration software

2 Getting Started

We recommend that you:

Review the contents of this user manual

Use Kramer high performance high resolution cables

This user manual is written for the end user and is applicable once the unit is

installed

and configured

Refer to the separate online RC Configuration and

Installation guide for details of how to install and configure the Universal Room

(Media / Room) Controller

1 GROUP 1: Distribution Amplifiers; GROUP 2: Video and Audio Switchers, Matrix Switchers and Controllers; GROUP

3: Video, Audio, VGA/XGA Processors; GROUP 4: Interfaces and Sync Processors; GROUP 5: Twisted Pair Interfaces;

GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and

Connectors

2 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com

3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com

4 Including the hardware installation, connecting the inputs and the display, and configuration via the Windows®-based

software and/or the IR learner

5 By authorized Kramer technical personnel or by an external system integrator (refer to the separate online guide)

6 That provides information about how to set up the system. This online guide may well be updated on a regular basis. For

the latest online guide, go to http://www.kramerelectronics.com

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Overview

3 Overview

The RC-7B / RC-7BE is a highly versatile controller interface panel for the

control of A/V equipment in any multimedia room, especially the control of

a projector or other display device, via RS-232 and/or IR emitter cable. The

RC-7B / RC-7BE is 12V DC fed. The RC-7B is a one-gang wall plate. The

RC-7BE is two-gang wall plate intended for the European market.

In particular, the RC-7B / RC-7BE features:

VOLUME Up and VOLUME Down buttons

ON, OFF, PC, DVD and VCR buttons, each of which can be

programmed to carry out up to 15 commands, in sequence, with one

press of a button

In addition, the RC-7B / RC-7BE includes:

Two IR ports

Two RS-232 serial ports for universal display

An RS-485 serial port

A 3.5mm CONFIG jack connector on the front panel for RS-232

configuration and control

An IR learner on the front panel for the customized control of external

sources, absorbing the IR commands from different remote transmitters

Control via the front panel buttons, and remotely, via RS-232

To achieve the best performance:

Connect only good quality connection cables, thus avoiding

interference, deterioration in signal quality due to poor matching, and

elevated noise- levels (often associated with low quality cables)

Avoid interference from neighboring electrical appliances and position

the RC-7B / RC-7BE away from moisture, excessive sunlight and dust

Caution – No operator-serviceable parts inside unit.

Warning – Use only the Kramer Electronics input power

wall adapter that is provided with this unit

Warning – Disconnect power and unplug unit from wall

before installing or removing device or servicing unit.

1 For example: model number AD2512C, part number 2535-000251

Your RC-7B / RC-7BE

4 Your RC-7B / RC-7BE

This section defines the:

Front panel of the RC-7B (see section 4.1)

Front panel of the RC-7BE (see section 4.2)

Side panel of the RC-7B and RC-7BE (see section 4.3)

4.1 Defining the RC-7B Front Panel

Figure 1 and Table 2 define the RC-7B front panel:

Figure 1: RC-7B Front Panel

Table 1: RC-7B Front Panel

# Feature Function

1 ON Button Turns ON the power to the

display device

2 Mounting

holes (2) For fastening the controller

in place

3 OFF Button Turns OFF the power to

the display device

4 Faceplate

Attachment

Holes (2)

For attaching the faceplate

to the controller

5 CONFIG Port

on 3.5mm jack

connector

Used for Windows®-based

configuration software

(driver downloads, firmware

updates and so on)

6 VCR Button Selects the VCR input

source

7 DVD Button Selects the DVD input

source

8 PC (includes

Mac) Button Selects the PC input

source (desktop or laptop

computer)

9 IR IN Receiver Accepts IR remote

commands (for the

IR-learner feature)

VOLUME 

Button Press to lower the volume

on the audio amplifier

VOLUME 

Button Press to raise the volume

on the audio amplifier

4.2 Defining the RC-7BE Front Panel

Figure 2 and Table 2 define the RC-7BE front panel:

1 For example, the projector or plasma display panel

2 These screws should not be removed during or after mounting

3 Via the front panel, without having to remove the RC-7B from its mounting

4 Letting you configure the RC-7B directly from the remote transmitter without the need for software

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Your RC-7B / RC-7BE

Figure 2: RC-7BE Front Panel

Table 2: RC-7BE Front Panel

# Feature Function

1 VOLUME Button Press to lower the volume on

the audio amplifier

2 Faceplate Attachment

Holes (2) For attaching the faceplate to

the controller

3 VOLUME Button Press to raise the volume on

the audio amplifier

4 ON Button Turns ON the power to the

display device

5 OFF Button Turns OFF the power to the

display device

6 CONFIG Port

3.5mm jack connector Used for Windows®-based

configuration software (driver

downloads, firmware updates

and so on)

7 IR IN Receiver Accepts IR remote

commands (for the IR-learner

feature)

8 PC (includes Mac)

Button Selects the PC input source

(desktop or laptop computer)

9 DVD Button Selects the DVD input source

VCR Button Selects the VCR input source

Mounting holes (4) For fastening the controller in

place

1 These screws should not be removed during or after mounting

2 For example, the projector or plasma display panel

3 Via the front panel, without having to remove the RC-7BE from its mounting

4 Letting you configure the RC-7BE directly from the remote transmitter without the need for software

Your RC-7B / RC-7BE

4.3 Defining the RC-7B / RC-7BE Side Panel

Figure 3 illustrates an enlarged view of the side panel of the RC-7B and

RC-7BE:

Figure 3: Side Panel of the RC-7B and RC-7BE (Enlarged View)

Figure 4 defines the side panel of the RC-7B and RC-7BE. For an

explanation of how to install and configure, refer to the chapter entitled:

Installation of the RC System in the online RC Configuration and

Installation guide

1 Download it from http://www.kramerelectronics.com

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Your RC-7B / RC-7BE

Figure 4: Side Panel of the RC-7B and RC-7BE

Using Your Media / Room Controller

5 Using Your Media / Room Controller

The example in Figure 5 shows a front view perspective of a typical

RC-7BE configuration. It connects to the projector via IR or RS-232:

Figure 5: RC-7BE (Front Perspective) Configuration

The example in Figure 6 shows a rear view perspective of a typical RC-7BE

configuration. It connects to the projector via RS-232. Each source—the PC,

DVD and VCR—connects to the dedicated video and audio inputs of the

projector:

1 From this section on, all the information is relevant to both the RC-7B and the RC-7BE, unless noted otherwise

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Using Your Media / Room Controller

Figure 6: RC-7BE (Rear Perspective) Configuration

Figure 7 shows the RC-7BE built into a podium in an auditorium with an

overhead projector and a cabinet with a VCR and a DVD inside, all

controlled via the RC-7BE. The presenter’s laptop is located on the podium,

next to the RC-7BE. It is also controlled by the RC-7BE and is used for

presentations and slide shows.

Andere Handbücher für RC-7B

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kramer Controller Handbücher

Kramer

Kramer SL-14RC Bedienungsanleitung

Kramer

Kramer KC-Virtual Brain5 Bedienungsanleitung

Kramer

Kramer PT-12 Bedienungsanleitung

Kramer

Kramer VA-4H Bedienungsanleitung

Kramer

Kramer SL-1N Bedienungsanleitung

Kramer

Kramer RC-76R Bedienungsanleitung

Kramer

Kramer RC-7B Bedienungsanleitung

Kramer

Kramer RC-6 Bedienungsanleitung

Kramer

Kramer SL-10 Bedienungsanleitung

Kramer

Kramer K-NET RC-53D Bedienungsanleitung

Kramer

Kramer SL-1 Bedienungsanleitung

Kramer

Kramer FC-28 Bedienungsanleitung

Kramer

Kramer KT-107-INWL Bedienungsanleitung

Kramer

Kramer SL-10 Bedienungsanleitung

Kramer

Kramer PL-50 Bedienungsanleitung

Kramer

Kramer RC-7RL Bedienungsanleitung

Kramer

Kramer RC-6IR Bedienungsanleitung

Kramer

Kramer RC-2 Bedienungsanleitung

Kramer

Kramer FC-18 Bedienungsanleitung

Kramer

Kramer RC-7LC Bedienungsanleitung

Kramer

Kramer RC-8IR Bedienungsanleitung

Kramer

Kramer 860 Bedienungsanleitung

Kramer

Kramer SL-12 Bedienungsanleitung

Kramer

Kramer SL-280 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung