Kramer SL-240C Bedienungsanleitung

SL-240C Quick Start (P/N: 2900-300895QS REV 2)

P/N:

2900- 300895QS

Rev:

Scan for full manual

SL-240C Quick Start Guide

This guide helps you install and use your SL-240C for the first time.

Go to www.kramerav.com/downloads/SL-240C to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s in the box

SL-240C Master / Room Controller

TOOL Mounting bracket kit

1 Quick start guide

5V DC Power Supply

Step 2: Get to know your SL-240C

Feature

Function

SERVICE Mini USB 2.0 Port

Connect to a PC to perform a firmware upgrade.

IR Learner and LED

Detects IR signals for IR learning and indicates an active signal by lighting blue.

LINK LED

Indicates Ethernet activity:

Blue LED on –good connection.

Blue LED flashing –no connection.

Blue LED off –not ready.

CONTROL LED

Indicates control states:

Green –the control application (brain) is ready and working.

Blue –the control application (brain) is synchronizing.

Red –indicates an error in the control application (brain).

USB Connector

N/A –For future use.

ID Button

For self-identification over the network.

Press the button to send (broadcast) the Beacon P3K command.

Reply includes: IP address, UDP port number, TCP port number, MAC address, and

Model Name.

RESET Button

For performing a factory default reset.

ON LED

Green –the device is powered.

LAN RJ-45 Connector

Connects to a local area network via PoE-enabled Ethernet cable. Indications:

Feature

Function

LINK LED lights amber –1000/100/10MB connection.

DATA LED flashes green –Ethernet data link activity.

SERIAL Ports (1-4) Terminal Block

Connect to up to 4 serial controlled devices, for Ethernet-to-RS232 bidirectional

tunneling.

IR Ports (1-4) Terminal Block

Connect to up to 4 IR emitters or blasters.

I/O Ports (1-4) Terminal Block

Connect to up to 4 sensors or devices to be controlled, (for example, a motion sensor).

Port may be configured as a digital input, digital output, or analog input.

RELAY Ports (1-4) Terminal Block

3 NO relays and 1 NO/NC relay.

Connect to up to 4 devices to be controlled by relay (for example, a motorized

projection screen).

5V DC

Connect to the 5V DC power supply and the mains electricity.

Step 3: Install the SL-240C

Install SL-240C using one of the following methods:

Fasten a bracket (included) on each side of the unit and attach it to a flat surface.

For more information go to www.kramerav.com/downloads/SL-240C.

Mount the unit in a rack using an optional RK-T2B rack adapter.

Step 4: Connect the inputs and outputs

Always switch OFF the power on each device before connecting it to your SL-240C. For best results, we recommend that you

always use Kramer high-performance cables to connect AV equipment to the SL-240C.

Step 5: Connect the power

Connect to a local area network via PoE-enabled Ethernet cable or, optionally, connect the 5V DC power supply to the SL-240C and

plug the power supply into the mains electricity.

Safety Instructions

Caution:

There are no operator serviceable parts inside the unit.

Warning:

Use only the Kramer Electronics power supply that is provided with the unit.

Warning:

Disconnect the power and unplug the unit from the wall before installing.

See www.KramerAV.com for updated safety information.

Inhaltsverzeichnis

Andere Kramer Controller Handbücher

Kramer

Kramer RC-63DLN Bedienungsanleitung

Kramer

Kramer PT-12 Bedienungsanleitung

Kramer

Kramer SL-1N Bedienungsanleitung

Kramer

Kramer RC-6IR Bedienungsanleitung

Kramer

Kramer RC-6 Bedienungsanleitung

Kramer

Kramer RC-63DLN Bedienungsanleitung

Kramer

Kramer SL-12 Bedienungsanleitung

Kramer

Kramer FC-26 Bedienungsanleitung

Kramer

Kramer FC-10ETH Bedienungsanleitung

Kramer

Kramer FC-18 Bedienungsanleitung

Kramer

Kramer RC-2 Bedienungsanleitung

Kramer

Kramer RC-54DL Bedienungsanleitung

Kramer

Kramer RC-62 Bedienungsanleitung

Kramer

Kramer RC-76R Bedienungsanleitung

Kramer

Kramer RC-8IR Bedienungsanleitung

Kramer

Kramer FC-26LA Bedienungsanleitung

Kramer

Kramer SL-1 Bedienungsanleitung

Kramer

Kramer RC-52N Bedienungsanleitung

Kramer

Kramer K-NET RC-53D Bedienungsanleitung

Kramer

Kramer RC-2C Bedienungsanleitung

Kramer

Kramer VA-4H Bedienungsanleitung

Kramer

Kramer FC-18 Bedienungsanleitung

Kramer

Kramer SL-1 Bedienungsanleitung

Kramer

Kramer SL-10 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung