Kramer VA-4H Bedienungsanleitung

KRAMER ELECTRONICS LTD.

USER MANUAL

MODEL:

VA-4H

4-Channel HDMI EDID

Controller

P/N: 2900-300043 Rev 2

VA-4H – Contents i

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instructions 2

2.3 Recycling Kramer Products 3

3Overview 4

4Defining the VA-4H 4-Channel HDMI EDID Controller 5

5Connecting the VA-4H 7

6Operating the VA-4H 8

7Technical Specifications 9

Figures

UFigure 1: VA-4H 4-Channel HDMI EDID Controller Front PanelU5

UFigure 2: VA-4H 4-Channel HDMI EDID Controller Rear PanelU6

UFigure 3: Connecting the VA-4H 4-Channel HDMI EDID ControllerU7

VA-4H - Introduction 1

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront the video, audio, presentation, and broadcasting

professional on a daily basis. In recent years, we have redesigned and upgraded

most of our line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:

Sierra Products.

Congratulations on purchasing your Kramer VA-4H 4-Channel HDMI EDID

Controller, which is ideal for the following typical applications:

•Distributing presentation graphics

•Using a display at a distance from the computer

•Using in graphics production studios

2 VA-4H - Getting Started

2 Getting Started

We recommend that you:

•Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

•Review the contents of this user manual

Go to http://www.kramerelectronics.com to check for up-to-date

user manuals, application programs, and to check if firmware

upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

•Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

•Do not secure the cables in tight bundles or roll the slack into tight coils

•Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

•Position your Kramer VA-4H and away from moisture, excessive sunlight

and dust

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

2.2 Safety Instructions

Caution: There are no operator serviceable parts inside the unit

Warning: Use only the Kramer Electronics input power wall

adapter that is provided with the unit

Warning: Disconnect the power and unplug the unit from the wall

before installing

VA-4H - Getting Started 3

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

aims to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility. For details of Kramer’s recycling arrangements in your particular country

go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

4 VA-4H - Overview

3 Overview

The VA-4H is an EDID controller for HDMI signals. The unit inputs up to four HDMI

channels and lets you select an EDID for each channel from the display, an

internal default EDID or to pass the signal through without change.

The VA-4H features:

•A maximum data rate of 2.25Gbps per channel for a total of 6.75Gbps

•A maximum input resolution of 1080p

•HDTV compatibility

•Compliance with standards: HDMI and HDCP 1.2

•Support of HDMI (V.1.4 with Deep Color, x.v.Color™, Lip Sync, HDMI

Uncompressed Audio Channels, Dolby TrueHD, DTS-HD, CEC)

•Four input/output channels

•Four tamper-proof, recessed selector pushbuttons

•Non-volatile memory that saves final settings

•LED indicators for power and EDID source settings

•An RS-232 port for upgrading firmware

•A 5V DC power source

•A compact MultiTools enclosure that can be rack mounted with an optional

RK-13 rack adapter

VA-4H - Defining the VA-4H 4-Channel HDMI EDID Controller 5

4 Defining the VA-4H 4-Channel HDMI EDID

Controller

This section defines the VA-4H.

Figure 1: VA-4H 4-Channel HDMI EDID Controller Front Panel

# Feature Function

1 ON LED Illuminates green when 5V DC power is connected

CHAN. 1

CAPTURE Button Press to choose the channel 1 EDID source

3 DEFAULT

PASS

MONITOR LEDS

Upper LED illuminates red when default EDID is chosen,

both LEDS illuminate when pass-through is chosen, lower

green LED illuminates when the monitor EDID is chosen

CHAN. 2

CAPTURE Button Press to choose the channel 2 EDID source

5 DEFAULT

PASS

MONITOR LEDS

Upper LED illuminates red when default EDID is chosen,

both LEDS illuminate when pass-through is chosen, lower

green LED illuminates when the monitor EDID is chosen

CHAN. 3

CAPTURE Button Press to choose the channel 3 EDID source

7 DEFAULT

PASS

MONITOR LEDS

Upper LED illuminates red when default EDID is chosen,

both LEDS illuminate when pass-through is chosen, lower

green LED illuminates when the monitor EDID is chosen

CHAN. 4

CAPTURE Button Press to choose the channel 4 EDID source

9 DEFAULT

PASS

MONITOR LEDS

Upper LED illuminates red when default EDID is chosen,

both LEDS illuminate when pass-through is chosen, lower

green LED illuminates when the monitor EDID is chosen

6 VA-4H - Defining the VA-4H 4-Channel HDMI EDID Controller

Figure 2: VA-4H 4-Channel HDMI EDID Controller Rear Panel

# Feature Function

CHAN. 1

IN HDMI

Connector Connects to the channel 1 HDMI source

11 OUT HDMI

Connector Connects to the channel 1 HDMI acceptor

CHAN. 2

IN HDMI

Connector Connects to the channel 2 HDMI source

13 OUT HDMI

Connector Connects to the channel 2 HDMI acceptor

CHAN. 3

IN HDMI

Connector Connects to the channel 3 HDMI source

15 OUT HDMI

Connector Connects to the channel 3 HDMI acceptor

CHAN. 4

IN HDMI

Connector Connects to the channel 4 HDMI source

17 OUT HDMI

Connector Connects to the channel 4 HDMI acceptor

18 PROGRAM RS-232

Connector Connects to a PC for upgrading the device firmware (see

Upgrading the VA-4H Firmware document on the Kramer

Web site)

19 5V DC Connector Connects to the 5V DC power supply

VA-4H - Connecting the VA-4H 7

5 Connecting the VA-4H

Always switch off the power to each device before connecting it to your

VA-4H. After connecting your VA-4H, connect its power and then

switch on the power to each device.

To connect the VA-4H as illustrated in the example in Figure 3:

1. Connect up to four HDMI sources (as an example, DVD players) to the

HDMI IN connectors.

2. Connect the HDMI OUT connectors to up to four HDMI acceptors (as an

example, displays with speakers).

Figure 3: Connecting the VA-4H 4-Channel HDMI EDID Controller

Andere Handbücher für VA-4H

Inhaltsverzeichnis

Andere Kramer Controller Handbücher

Kramer

Kramer FC-22ETH Bedienungsanleitung

Kramer

Kramer RC-7B Bedienungsanleitung

Kramer

Kramer PT-12 Bedienungsanleitung

Kramer

Kramer RC-62 Bedienungsanleitung

Kramer

Kramer SL-280 Bedienungsanleitung

Kramer

Kramer RC-43SL Bedienungsanleitung

Kramer

Kramer RC-63DLN Bedienungsanleitung

Kramer

Kramer FC-18 Bedienungsanleitung

Kramer

Kramer SL-10 Bedienungsanleitung

Kramer

Kramer RC-63DLN Bedienungsanleitung

Kramer

Kramer RC-8IR Bedienungsanleitung

Kramer

Kramer SL-1 Bedienungsanleitung

Kramer

Kramer FC-10ETH Bedienungsanleitung

Kramer

Kramer RC-76R Bedienungsanleitung

Kramer

Kramer FC-26LA Bedienungsanleitung

Kramer

Kramer RC-6 Bedienungsanleitung

Kramer

Kramer 860 Bedienungsanleitung

Kramer

Kramer FC-18 Bedienungsanleitung

Kramer

Kramer PT-12 Bedienungsanleitung

Kramer

Kramer SL-240 Bedienungsanleitung

Kramer

Kramer SL-280 Bedienungsanleitung

Kramer

Kramer K-NET RC-53D Bedienungsanleitung

Kramer

Kramer RC-2 Bedienungsanleitung

Kramer

Kramer RC-52N Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung