Kramer K-NET RC-53D Bedienungsanleitung

Kramer Electronics, Ltd.

USER MANUAL

Model:

RC-53D

K-NET™ Auxiliary Control Panel

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

Contents

1Introduction 1

2Getting Started 1

2.1 Achieving the Best Performance 2

2.2 Safety Instructions 2

2.3 Recycling Kramer Products 2

3Overview 3

4Defining the RC-53D 3

4.1 Grounding the RC-53D 5

5Using the RC-53D K-NET™ Auxiliary Control Panel 6

6Installing the RC-53D Faceplate, Button Caps and Labels 7

7Operating the RC-53D K-NET™ Auxiliary Control Panel 9

8Technical Specifications 10

Figures

Figure 1: RC-53D K-NET™ Auxiliary Control Panel – Front Panel 3

Figure 2: RC-53D K-NET™ Auxiliary Control Panel – Rear Panel 4

Figure 3: Grounding Connection Components 5

Figure 4: RC-53D connected to the SV-551 SummitView™ Processor / Switcher 6

Figure 5: Sample Button Label Sheet 7

Figure 6: Button Cap Orientation 7

Figure 7: Inserting the Label 7

Figure 8: Placing the Button Cap 8

Figure 9: RC-53D Labels Setup 9

Tables

Table 1: RC-53D K-NET™ Auxiliary Control Panel – Front Panel Features 4

Table 2: RC-53D K-NET™ Auxiliary Control Panel – Rear Panel Features 4

Table 3: Grounding Component Descriptions 5

Table 4: The Commands Configuration 9

Table 5: Technical Specifications of the RC-53D K-NET™ Auxiliary Control Panel 10

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing

a world of unique, creative, and affordable solutions to the vast range of problems

that confront the video, audio, presentation, and broadcasting professional on a daily

basis. In recent years, we have redesigned and upgraded most of our line, making the

best even better! Our 1,000-plus different models now appear in 11 groups1that are

clearly defined by function.

Congratulations on purchasing your Kramer RC-53D K-NET™ Auxiliary Control

Panel which is available in European (80mm and 86mm height versions) and

American versions, and can be used as a system controller when connected via

K-NET™2to a Master room controller (for example, the SV-552 SummitView™

Processor / Switcher or one of the Kramer SL series controllers).

2 Getting Started

This user manual is written for the end user. Refer to the separate

K-Config Configuration Guide (available online) for details of how to

install and configure the Room Controller3

We recommend that you:

•Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

•Review the contents of this user manual

Go to http://www.kramerelectronics.com to check for up-to-date

user manuals, application programs, and to check if firmware

upgrades are available (where appropriate).

1 GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers; GROUP 3: Control Systems; GROUP 4: Format/Standards

Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7: Scan Converters and Scalers;

GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra

Products

2 K-NET is a proprietary Kramer protocol for communication between Kramer products

3 The guide provides information about how to set up the system and is updated on a regular basis. For the latest online guide, go to

http://www.kramerelectronics.com

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Getting Started

2.1 Achieving the Best Performance

To achieve the best performance:

•Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

•Do not secure the cables in tight bundles or roll the slack into tight coils

•Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

•Position your Kramer RC-53D away from moisture, excessive sunlight and

dust

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

2.2 Safety Instructions

Caution: No operator serviceable parts inside the unit

Warning: Use only the Kramer Electronics input power wall

adapter that is provided with the unit

Warning: Disconnect the power and unplug the unit from the wall

before installing

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

aims to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility. For details of Kramer’s recycling arrangements in your particular country

go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

Overview

3 Overview

The RC-53D is an auxiliary remote control panel for Master Room Controllers1for

control of A/V equipment in a room.

The RC-53D:

•Features six front panel, single color, backlit buttons designed in two groups;

one group of two buttons, and another group of four buttons

•Has a digital volume control adjustment knob

•Is available as a 2 Gang wall plate for the USA or a 2 Gang wall plate for

Europe2

•Does not require a separate power supply

•Includes an RS-232 serial port

•Includes two K-NET ports and a USB port for firmware upgrade

•Features two programmable LCD displays, one for each button group

4 Defining the RC-53D

Figure 1and Table 1define the RC-53D front panel.

Figure 1: RC-53D K-NET™ Auxiliary Control Panel – Front Panel

1 Such as the Kramer SummitView System or the SL-1 Master Room Controller

2 Available in two height sizes: 8.6cm and 8cm

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Defining the RC-53D

Table 1: RC-53D K-NET™ Auxiliary Control Panel – Front Panel Features

# Feature Function

1 SOURCE Buttons Group of four programmable, backlit buttons

2 Faceplate Screws Four screws connecting the faceplate to the Rear Box

3 “DISPLAY” and “SOURCE”

Labels

Programmable, 8 character, LCD displays on a blue background

4 DISPLAY Buttons Group of two programmable, backlit buttons

5 Maximum VOLUME LED Lights red, indicating maximum volume

6 VOLUME LEDs Light green, indicating volume level

7 VOLUME Knob Rotate clockwise to increase volume level

Figure 2and Table 2define the RC-53D rear panel.

Figure 2: RC-53D K-NET™ Auxiliary Control Panel – Rear Panel

Table 2: RC-53D K-NET™ Auxiliary Control Panel – Rear Panel Features

# Feature Function

1 Program USB Connector Connect to a computer for firmware upgrade

2 Grounding Screw Connect to grounding wire

3 RS-232 Terminal Block For factory use only

4 K-NET Terminal Block Connect the GND to the Ground connection3, connect B (-) and

A (+) to RS-485, and connect +12V to +12V on the companion

unit

5 K-NET Terminal Block

1 By the system integrator only

2 When the unit is connected via K-NET to a Master Room Controller, you can upgrade the firmware via the USB or ETH ports of the

Master Room Controller

3 The ground connection is sometimes connected to the shield of the RS-485 cable (in most applications, it is not connected)

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

Defining the RC-53D

4.1 Grounding the RC-53D

The grounding screw is used to earth the chassis of the unit to the building ground

preventing static electricity from impacting the performance of the unit.

Figure and3Table define the grounding screw components.3

Figure 3: Grounding Connection

Components

Table 3: Grounding Component

Descriptions

# Component Description

1 M3X6 screw

2 1/8" Toothed Lock Washer

3 M3 Ring Tongue Terminal

To ground the RC-53DLC:

1. Connect the Ring Tongue terminal to the building grounding point wire (it is

recommended to use a green-yellow AWG#18 (0.82mm2) wire, crimped with

a proper hand-tool).

2. Insert the M3x6 screw through the toothed lock washers and the tongue

terminal in the order shown above.

3. Insert the M3x6 screw (with the two toothed lock washers and ring tongue

terminal) into the grounding screw hole and tighten the screw.

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Using the RC-53D K-NET™ Auxiliary Control Panel

5 Using the RC-53D K-NET™ Auxiliary Control Panel

The installation process is not detailed in this user manual. This user manual is

applicable once the unit is installed and configured1, and includes:

•Setting up the labels on the buttons, according to your specific requirements

•Configuration of the Master room controller via the K-Config Windows®-based

configuration software

Since the auxiliary panel is used as a remote controller for Master Room

Controllers via the proprietary communication channel K-NET (as illustrated in

Figure 4):

•It requires only a K-NET connection to the Master Room controller

•A power supply unit is not required2

•The auxiliary panel can be programmed only via the Master Room controller

(for example, the Kramer SV-551 SummitView™ Processor/Switcher)

Figure 4: RC-53D connected to the SV-551 SummitView™ Processor / Switcher

1 By authorized Kramer technical personnel or by an external system integrator

2 Power supplies are sold separately. Consult your Kramer dealer for details

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

Installing the RC-53D Faceplate, Button Caps and Labels

6 Installing the RC-53D Faceplate, Button Caps and Labels

This section describes how to install the faceplate, button caps and labels.

Figure 5illustrates a sample button label sheet.

Figure 5: Sample Button Label Sheet

To install the faceplate, button caps and labels:

1. Remove the required labels from the supplied button label sheet.

2. Hold the button cap so that it is oriented as shown in Figure 6with the

“wings” on the left and right sides.

Figure 6: Button Cap Orientation

3. Insert the label inside the cap

Figure 7: Inserting the Label

4. Repeat for all six caps.

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

Andere Handbücher für K-NET RC-53D

Inhaltsverzeichnis

Andere Kramer Controller Handbücher

Kramer

Kramer RC-7LC Bedienungsanleitung

Kramer

Kramer SL-1 Bedienungsanleitung

Kramer

Kramer RC-2 Bedienungsanleitung

Kramer

Kramer RC-7B Bedienungsanleitung

Kramer

Kramer KC-Virtual Brain5 Bedienungsanleitung

Kramer

Kramer RC-6 Bedienungsanleitung

Kramer

Kramer RC-52N Bedienungsanleitung

Kramer

Kramer RC-76R Bedienungsanleitung

Kramer

Kramer SL-280 Bedienungsanleitung

Kramer

Kramer RC-63DLN Bedienungsanleitung

Kramer

Kramer RC-7B Bedienungsanleitung

Kramer

Kramer SL-1 Bedienungsanleitung

Kramer

Kramer SL-240C Bedienungsanleitung

Kramer

Kramer FC-26LA Bedienungsanleitung

Kramer

Kramer PT-12 Bedienungsanleitung

Kramer

Kramer RC-7RL Bedienungsanleitung

Kramer

Kramer RC-74DL Bedienungsanleitung

Kramer

Kramer RC-8IR Bedienungsanleitung

Kramer

Kramer SL-280 Bedienungsanleitung

Kramer

Kramer SL-1N Bedienungsanleitung

Kramer

Kramer RC-2C Bedienungsanleitung

Kramer

Kramer RC-76R Bedienungsanleitung

Kramer

Kramer PT-12 Bedienungsanleitung

Kramer

Kramer SL-10 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch