Kramer RC-54DL Bedienungsanleitung

KRAMER ELECTRONICS LTD.

USER MANUAL

MODEL:

RC-54DL

KNET™ Auxiliary Control Panel

P/N: 2900-300130 Rev 1

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

RC-54DL – Contents i

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

3Overview 3

3.1 The RC-54DL KNET™ Auxiliary Control Panel Front Side 4

3.2 The RC-54DL KNET™ Auxiliary Control Panel Rear Side 5

4Connecting the RC-54DL KNET™ Auxiliary Control Panel 6

5Grounding the RC-54DL 7

6Operating the RC-54DL 8

7Front Panel Button Caps and Labels 9

7.1 Installing the Front Panel Button Caps, Labels 12

8Technical Specifications 14

Figures

Figure 1: RC-54DL Front Panel 4

Figure 2: RC-54DL Rear Panel 5

Figure 3: Connecting the RC-54DL 6

Figure 4: Grounding Connection Components 7

Figure 5: RC-54DL to RC-74DL Pinout Connection 8

Figure 6: Sample Button Label Sheet 11

Figure 7: Button Cap Orientation 12

Figure 8: Button Cap Orientation with Label 12

Figure 9: Placing the Button Cap 12

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

RC-54DL – Introduction 1

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined by

function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:

Sierra Video Products.

Congratulations on purchasing your Kramer RC-54DL KNET™ Auxiliary Control

Panel, which is designed to let you remotely control an A/V system with ease, in a

multimedia classroom or conference room.

Each package includes the following items:

•The RC-54DL KNET™ Auxiliary Control Panel

•3 Gang US Installation mud ring

•Power supply

•This user manual

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

2 RC-54DL - Getting Started

2 Getting Started

We recommend that you:

•Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

•Review the contents of this user manual

•Use Kramer high performance high resolution cables

Go to http://www.kramerelectronics.com to check for up-to-date user

manuals, application programs, and to check if firmware upgrades are

available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

•Use only good quality connection cables to avoid interference, deterioration

in signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

•Do not secure the cables in tight bundles or roll the slack into tight coils

•Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

•Position your Kramer RC-54DL away from moisture, excessive sunlight and

dust

Caution: No operator serviceable parts inside the unit

Warning: Use only the Kramer Electronics input power wall

adapter that is provided with the unit

Warning: Disconnect the power and unplug the unit from the wall

before installing

K-NET™ is a proprietary Kramer protocol for interconnecting Kramer

units

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

RC-54DL – Overview 3

3 Overview

The RC-54DL is a 3 gang US, auxiliary room controller that acts as an all-in-one

extended remote control panel for remotely controlling room controllers (for

example, the Kramer RC-74DL) in classrooms, boardrooms or auditoriums.

The RC-54DL features:

•12 configurable, RGB backlit, front panel buttons in three groups

•1 configurable rotary up/down controller with direction indicator LEDs

•Two K-NET™ control channels that connect compatible user interfaces and

supply power and control data over a single cable

•Flexible control via K-NET

k-Config is available from Kramer Electronics on our Web site at

http://www.kramerelectronics.com/support/?soft=k-config

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

4 RC-54DL - Overview

3.1 The RC-54DL KNET™ Auxiliary Control Panel Front Side

This section defines the RC-54DL:

Figure 1: RC-54DL Front Panel

Feature

Function

1 6 Configurable Button

Switches

Function is programmed by the K-Config Configuration

software

2 LCD Label Displays up to 8 characters at once (set by the K-Config

configuration software)

3 4 Configurable Button

Switches

Function is programmed by the K-Config Configuration

software

4 LCD Label Displays up to 8 characters at once (set by the K-Config

configuration software)

5 2 Configurable Button

Switches

Function is programmed by the K-Config Configuration

software

6 LCD Label Displays up to 8 characters at once (set by the K-Config

configuration software)

7 Rotary Dial up/down LED

indicator

Indicates the level set by the rotary dial

VOLUME Rotary Dial Function is programmed by the K-Config Configuration

software

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

RC-54DL – Overview 5

3.2 10BThe RC-54DL KNET™ Auxiliary Control Panel Rear Side

Figure 2: RC-54DL Rear Panel

Feature

Function

1 RESET TO DEFAULT

Button

Disconnect the power and then connect it while pressing

the RESET TO DEFAULT button (using a small

screwdriver). The unit will power up and load its memory

with the factory default KNET ID auxiliary setting (ID=2).

This operation should be carried out by authorized Kramer

technical personnel or by a qualified system integrator, and

requires removal of the device from the wall by unscrewing the

four wall mount screws

2 PROGRAM (USB)

Connector

Connect to a computer for firmware upgrade or setting the

K-NET ID number

3 Power Supply 2-pin

Terminal Block Connector

Connect to power supply (when power is not supplied over

the K-NET)

Connect GND to GND, +12V to +12V

4 K-NET TERM Switch Slide to the left (in the direction of the arrow) for K-NET

termination, slide to the right up to leave bus unterminated.

The last physical device on a K-NET bus must be terminated

5 K-NET1 Connector Connect the GND pin to the Ground connection; pin B (-)

and pin A (+) are for RS-485, and the +12V pin is for

powering the unit

The ground connection is sometimes connected to the shield of

the RS-485 cable

6 K-NET2 Connector Connect the GND pin to the Ground connection; pin B (-)

and pin A (+) are for RS-485, and the +12V pin is for

powering the unit

The ground connection is sometimes connected to the shield of

the RS-485 cable

7 Ring Tongue Terminal

Grounding Screw

Connect to grounding wire (optional), (see Section 5)

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

6 RC-54DL - Connecting the RC-54DL KNET™ Auxiliary Control Panel

4 Connecting the RC-54DL KNET™ Auxiliary

Control Panel

Always switch off the power to each device before connecting it to your

Transmitter and Receiver pair. After connecting your Transmitter and Receiver

pair, connect their power and then switch on the power to each device.

To connect the RC-54DL, as shown in the example in Figure 3, do the following:

1. Connect the K-NET ports to any RC devices with K-NET (for example, the

RC-63DL and SL-12).

2. Connect the 12V DC power adapter to the RC-54DL power socket and to the

mains electricity (not shown in Figure 3).

Alternatively, the RC-54DL can receive power over the K-NET port via the

connected master room controller.

Figure 3: Connecting the RC-54DL

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

RC-54DL – Grounding the RC-54DL 7

5 Grounding the RC-54DL

The grounding screw is used to earth the chassis of the unit to the building ground

preventing static electricity from impacting the performance of the unit.

Figure 4defines the grounding screw components.

Figure 4: Grounding Connection Components

# Component Description

1 M3X6 screw

2 1/8" Toothed Lock Washer

3 M3 Ring Tongue Terminal

To ground the RC-54DL:

1. Connect the Ring Tongue terminal to the building grounding point wire (it is

recommended to use a green-yellow AWG#18 (0.82mm2) wire, crimped with

a proper hand-tool).

2. Insert the M3x6 screw through the toothed lock washers and the tongue

terminal in the order shown above.

3. Insert the M3x6 screw (with the two toothed lock washers and ring tongue

terminal) into the grounding screw hole and tighten the screw.

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

8 RC-54DL - Operating the RC-54DL

6 Operating the RC-54DL

Since the auxiliary panel is used as a remote controller for Master Room Controllers

via the proprietary communication channel K-NET (as illustrated in Figure 5):

•It requires a K-NET connection to a Master Room controller (for example, the

Kramer RC-74DL Master Room Controller)

•The auxiliary panel can be programmed only via the Master Room controller

For instructions on using the software, see the K-Config Software Guide available

from our Web site. Once configured, use the front panel buttons as a remote

controller for the connected master room controllers.

Figure 5: RC-54DL to RC-74DL Pinout Connection

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

Inhaltsverzeichnis

Andere Kramer Controller Handbücher

Kramer

Kramer RC-8IR Bedienungsanleitung

Kramer

Kramer RC-52N Bedienungsanleitung

Kramer

Kramer SL-280 Bedienungsanleitung

Kramer

Kramer SL-280 Bedienungsanleitung

Kramer

Kramer SL-1 Bedienungsanleitung

Kramer

Kramer SL-14RC Bedienungsanleitung

Kramer

Kramer RC-63DLN Bedienungsanleitung

Kramer

Kramer SL-240 Bedienungsanleitung

Kramer

Kramer RC-76R Bedienungsanleitung

Kramer

Kramer PL-50 Bedienungsanleitung

Kramer

Kramer FC-22ETH Bedienungsanleitung

Kramer

Kramer SL-10 Bedienungsanleitung

Kramer

Kramer KT-107-INWL Bedienungsanleitung

Kramer

Kramer SL-10 Bedienungsanleitung

Kramer

Kramer RC-7RL Bedienungsanleitung

Kramer

Kramer SL-12 Bedienungsanleitung

Kramer

Kramer RC-6 Bedienungsanleitung

Kramer

Kramer PT-12 Bedienungsanleitung

Kramer

Kramer RC-7B Bedienungsanleitung

Kramer

Kramer PT-12 Bedienungsanleitung

Kramer

Kramer RC-13TC Bedienungsanleitung

Kramer

Kramer SL-12 Bedienungsanleitung

Kramer

Kramer SL-1N Bedienungsanleitung

Kramer

Kramer RC-7LC Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung