Kramer DigiTOOLS 7508 Bedienungsanleitung

Kramer Electronics, Ltd.

Preliminary

USER MANUAL

Model:

7508

CV/YC to SDI Converter

Contents

1Introduction 1

2Getting Started 1

2.1 Quick Start 2

3Overview 3

4Your 7508 CV/YC to SDI Converter 4

5Using Your 7508 CV/YC to SDI Converter 5

5.1 Connecting a PC 6

5.2 Setting the DIP-Switches 8

6Technical Specifications 9

7Communication Protocol 10

Figures

Figure 1: 7508 CV/YC to SDI Converter 4

Figure 2: Connecting a 7508 CV/YC to SDI Converter 6

Figure 3: Crossed Cable RS-232 Connection 7

Figure 4: Straight Cable RS-232 Connection with a Null Modem Adapter 7

Figure 5: DIP-Switch Settings 8

Tables

Table 1: 7508 CV/YC to SDI Converter Features 4

Table 2: Setting the DIP-Switches 8

Table 3: Technical specifications of the 7508 CV/YC to SDI Converter 9

Table 4: Structure of the Protocol 10

Table 5: Instruction Set for the 7508 10

Table 6: Input Standard 11

Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast

range of problems that confront the video, audio, presentation, and

broadcasting professional on a daily basis. In recent years, we have

redesigned and upgraded most of our line, making the best even better! Our

1,000-plus different models now appear in 11 groups1

Thank you for purchasing your Kramer DigiTOOLS 7508CV/YC to SDI

Converter, which is ideal for broadcast and production video studios,

postproduction and duplication studios, and non-linear editing. The package

includes the following items:

that are clearly

defined by function.

•7508CV/YC to SDI Converter

•Power supply

•Null-modem adapter and Windows®-based Kramer control

software

•This user manual2

2 Getting Started

We recommend that you:

•Unpack the equipment carefully and save the original box and

packaging materials for possible future shipment

•Review the contents of this user manual

•Use Kramer high performance high-resolution cables3

1 GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix Switchers; GROUP 3: Control Systems;

GROUP 4: Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products;

GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity;

GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Products

2 Download up-to-date Kramer user manuals from our Web site at http://www.kramerelectronics.com

3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Getting Started

2.1 Quick Start

This quick start chart summarizes the basic setup and operation steps.

Overview

3 Overview

The high quality Kramer DigiTOOLS 7508CV/YC to SDI Converter is a

multi-standard converter of analog video (composite and s-Video) to

SMPTE-259M serial digital video (SDI). Many professional video units on

the market today, such as Betacam decks and DVD players have high

quality analog outputs, and the 7508is ideal for preserving the quality, and

minimizing the artifacts, when converting to the digital domain.

In particular, the 7508:

•Converts the SDI on 2 buffered and reclocked SDI outputs

•Automatically detects the input standard (50/60Hz), generating the

appropriate output

•Uses true 10-bit digitizing, making it ideal for the most demanding

applications

•Has an RS-232 port and can be controlled via a user-friendly

Windows®-based program that can modify video parameters such

as contrast, saturation and hue, which may be stored in non-volatile

memory

To achieve the best performance:

•Use only good quality connection cables1

•Avoid interference from neighboring electrical appliances that may

adversely influence signal quality and position your Kramer 7508

away from moisture, excessive sunlight and dust

to avoid interference,

deterioration in signal quality due to poor matching, and elevated

noise levels (often associated with low quality cables).

1 Available from Kramer Electronics on our Web site at http://www.kramerelectronics.com

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Your 7508 CV/YC to SDI Converter

4 Your 7508 CV/YC to SDI Converter

Figure 1and Table 1define the 7508CV/YC to SDI Converter:

Figure 1: 7508 CV/YC to SDI Converter

Table 1: 7508 CV/YC to SDI Converter Features

Feature

Function

1 12V DC +12V DC connector for powering the unit

2 SDI OUT 2 BNC Connector Connects to the SDI acceptor 2

3 SDI OUT 1 BNC Connector Connects to the SDI acceptor 1

4 Y/C INPUT 4-pin Connector Connects to the s-Video source

5 CV INPUT BNC Connector Connects to the composite video source

6 ON LED Illuminates when receiving power

7 RS-232 Port Connects to the PC or the remote controller

8 Dipswitches DIP-switches for setup of the unit

Using Your 7508 CV/YC to SDI Converter

5 Using Your 7508 CV/YC to SDI Converter

You can use your 7508CV/YC to SDI Converter to convert professional

quality composite video or s-Video (as the example in Figure 2illustrates)

to one or two SDI video outputs.

To convert composite video or s-Video to up to 2 SDI video outputs, do the

following1

1. Connect a composite video source (for example, a VCR) to the CV BNC

INPUT connector.

2. Connect an s-Video source (for example, a camera) to the Y/C 4-pin

INPUT connector.

3. Connect both SDI outputs to SDI acceptors as follows (when only one SDI

output is required, use either of the SDI outputs of the 7508, and leave the

other SDI output unconnected):

•Connect the SDI OUT 1 BNC connector to an SDI acceptor

(for example, an SDI monitor)

•Connect the SDI OUT 2 BNC connector to the second SDI

acceptor (for example, an SDI monitor)

4. Set the DIP-switches, as section 5.2 describes

5. Connect the 12V DC power adapter to the power socket and connect the

adapter to the mains electricity.

The composite video2or s-Video3

6. Connect a PC (if required) to the RS-232 port (see section

signal converts to SDI at both SDI OUT

1 and SDI OUT 2.

5.1).

1 Switch OFF the power on each device before connecting it to your 7508. After connecting your 7508, switch on its power

and then switch on the power on each device

2 To choose the CV input, set the Y/C (DIP 1) OFF

3 To choose the Y/C input, set the Y/C (DIP 1) ON

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Using Your 7508 CV/YC to SDI Converter

Figure 2: Connecting a 7508 CV/YC to SDI Converter

5.1 Connecting a PC

You can connect to the unit via a crossed RS-232 connection, using for

example, a PC. A crossed cable or null-modem is required as shown in

method A and B respectively. If a shielded cable is used, connect the shield

to pin 5.

Method A (Figure 3)—Connect the RS-232 9-pin D-sub port on the unit via

a crossed cable (pin 2 to pin 3, pin 3 to pin 2, and pin 5 to pin 5) to the

RS-232 9-pin D-sub port on the PC.

Note: There is no need to connect any other pins.

Using Your 7508 CV/YC to SDI Converter

Figure 3: Crossed Cable RS-232 Connection

Hardware flow control is not required for this unit. In the rare case where a

controller requires hardware flow control, short pin 1 to 7 and 8, and pin 4

to 6 on the controller side.

Method B (Figure 4)—Connect the RS-232 9-pin D-sub port on the unit via

a straight (flat) cable to the null-modem adapter, and connect the null-

modem adapter to the RS-232 9-pin D-sub port on the PC. The straight

cable usually contains all nine wires for a full connection of the D-sub

connector. Because the null-modem adapter (which already includes the

flow control jumpering described in Method A above) only requires pins 2,

3 and 5 to be connected, you are free to decide whether to connect only

these 3 pins or all 9 pins.

Figure 4: Straight Cable RS-232 Connection with a Null Modem Adapter

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Using Your 7508 CV/YC to SDI Converter

5.2 Setting the DIP-Switches

Configure the 7508 unit by setting the DIP-switches, as shown in Table 2

and Figure 5.

Table 2: Setting the DIP-Switches

DIP-Switch

Set as Follows:

1 Y/C ON for Y/C source; OFF for CV source

2 RESERVED OFF

3 PEDESTAL1ON for pedestal (7.5 IRE offset selection for NTSC); OFF for no pedestal

AUTO NTSC PAL PAL-M PAL-N NTSC-4 SECAM AUTO

4 STANDARD 1 OFF ON OFF ON OFF ON OFF ON

5 STANDARD 2 OFF OFF ON ON OFF OFF ON ON

6 STANDARD 3 OFF OFF OFF OFF ON ON ON ON

7 RESERVED OFF

8 PROGRAM ON for upgrading firmware; OFF for normal use

Figure 5: DIP-Switch Settings

1 NTSC offsets the black level within the active video signal by 7.5 IRE when selected

Andere Handbücher für DigiTOOLS 7508

Inhaltsverzeichnis

Andere Kramer Medienkonverter Handbücher

Kramer

Kramer KDS-EN6 Bedienungsanleitung

Kramer

Kramer FC-5000 Bedienungsanleitung

Kramer

Kramer VP-439 Bedienungsanleitung

Kramer

Kramer VP-439 Bedienungsanleitung

Kramer

Kramer PT-1SPDIF Bedienungsanleitung

Kramer

Kramer VP-426C Bedienungsanleitung

Kramer

Kramer FC-70R Bedienungsanleitung

Kramer

Kramer FC-7402 Bedienungsanleitung

Kramer

Kramer 810 Bedienungsanleitung

Kramer

Kramer KIT-500 Bedienungsanleitung

Kramer

Kramer FC-69 Bedienungsanleitung

Kramer

Kramer VP-551X Bedienungsanleitung

Kramer

Kramer TOOLS VP-100 Bedienungsanleitung

Kramer

Kramer KDS-EN5 Bedienungsanleitung

Kramer

Kramer SID-X3N Bedienungsanleitung

Kramer

Kramer FC-14 Bedienungsanleitung

Kramer

Kramer VM-80VN Bedienungsanleitung

Kramer

Kramer VP-437xl Bedienungsanleitung

Kramer

Kramer FC-7501 Bedienungsanleitung

Kramer

Kramer VP-440H2 Bedienungsanleitung

Kramer

Kramer VM-4HDCPxl Bedienungsanleitung

Kramer

Kramer VM-1110xl Bedienungsanleitung

Kramer

Kramer VM-24HDMI Bedienungsanleitung

Kramer

Kramer WP-SW2-EN7 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung