Kramer FC-101Net Bedienungsanleitung

FC-101NET Quick Start (P/N: 2900-300861QS REV 1)

P/N:

2900- 300861QS

Rev:

Scan for full manual

FC-101NET Quick Start Guide

This guide helps you install and use your FC-101NET for the first time.

Go to www.kramerav.com/downloads/FC-101NET to download the latest user manual and check if

firmware upgrades are available.

Step 1: Check what’s in the box

FC-101NET Dual Dante Interface

1 Bracket set

Double-sided adhesive dual lock tape

1 Quick start guide

Step 2: Get to know your FC-101NET

Feature

Function

ON LED

Lights green when the device receives power.

SYS LED

Lights green when Dante network is available; red if an error has occurred.

SYNC LED

Lights green for digital audio normal operation; red if an error has occurred.

Dante PoE RJ-45 Port

Connect to the Dante audio source via the Network and provide Power over Ethernet

(PoE) to the device.

By default, DHCP is enabled.

DEF Push Button

To reset/reboot the device, press and release the button.

To reset to factory settings, press and hold the button for 30 seconds.

OUTPUTS 1 and 2 5-pin Terminal

Block Connector

Connect to a single balanced stereo audio output or two separate mono outputs

(+, –, G).

RS-232 3-pin Terminal Block

Connector

Connect to a serial controller to control this device.

Step 3: Install FC-101NET

Install FC-101NET using one of the following methods:

Attach one side of the adhesive dual lock tape to the metallic surface of the device

and the other to a flat surface.

Fasten a bracket (included) on each side of the unit and attach it to a flat surface.

For more information go to www.kramerav.com/downloads/FC-101NET.

Mount the unit in a rack using an optional RK-4PT rack adapter.

Step 4: Connect the inputs and outputs

Always switch OFF the power on each device before connecting it to your FC-101NET. For best results, we recommend that you

always use Kramer high-performance cables to connect AV equipment to FC-101NET.

Step 5: Connect the power

Once connected, PoE is provided via the Dante port.

Safety Instructions

Caution:

There are no operator serviceable parts inside the unit.

Warning:

Disconnect the power before installing.

See www.KramerAV.com for updated safety information.

Step 6: Operate FC-101NET

Operate FC-101NET via:

Remotely, RS-232 serial

commands transmitted by a touch

screen system, PC, or other serial

controller.

RS-232

Baud Rate:

115200

Parity:

None

Stop Bits:

Data Bits:

Command Format:

ASCII

Example: (set the volume output to -6dB): #AUD-LVL 2,1,-6<CR>

Technical Specifications

Outputs

1 Balanced Stereo Audio/2 Mono Audio

On a 5-pin terminal block

Port

1 Dante

On an RJ-45 connector

Control

Dante IP control matrix and Kramer Protocol 3000

Power

Consumption

48V DC, 100mA

Source

48V DC (PoE)

Cooling

Convection Ventilation

Environmental Conditions

Operating Temperature

0° to +40°C (32° to 104°F)

Storage Temperature

-40° to +70°C (-40° to 158°F)

Humidity

10% to 90%, RHL non-condensing

Regulatory Compliance

Safety

Environmental

RoHs, WEEE

Enclosure

Size

Pico TOOL

Type

Aluminum

General

Net Dimensions (W, D, H)

6.2cm x 5.2cm x 2.4cm (2.4” x 2” x 1”) W, D, H

Shipping Dimensions (W, D, H)

15.7 cm x 12cm x 8.7cm (6.2” x 4.7” x 3.4”) W, D, H

Net Weight

0.08kg (0.2lb)

Shipping Weight

0.23kg (0.5lb)

Accessories

Included

Bracket set, double-sided adhesive dual lock tape

Optional

RK-4PT rack adapter

Specifications are subject to change without notice at www.kramerav.com

Andere Handbücher für FC-101Net

Dieses Handbuch passt für folgende Modelle

Andere Kramer Medienkonverter Handbücher

Kramer

Kramer FC-46 Bedienungsanleitung

Kramer

Kramer VM-4UHD Bedienungsanleitung

Kramer

Kramer VM-3UHD Bedienungsanleitung

Kramer

Kramer VP-791 Bedienungsanleitung

Kramer

Kramer VM-50AN Bedienungsanleitung

Kramer

Kramer 466 Bedienungsanleitung

Kramer

Kramer VP-773AMP Bedienungsanleitung

Kramer

Kramer FC-42 Bedienungsanleitung

Kramer

Kramer FC-5000 Bedienungsanleitung

Kramer

Kramer VM-127 Bedienungsanleitung

Kramer

Kramer VA-10 Bedienungsanleitung

Kramer

Kramer FC-7402 Bedienungsanleitung

Kramer

Kramer KIT-500 Bedienungsanleitung

Kramer

Kramer VP-436N Bedienungsanleitung

Kramer

Kramer VP-437 Bedienungsanleitung

Kramer

Kramer PT-1SPDIF Bedienungsanleitung

Kramer

Kramer FC-113 Bedienungsanleitung

Kramer

Kramer FC-32 Bedienungsanleitung

Kramer

Kramer VM-16HDMI Bedienungsanleitung

Kramer

Kramer VCO-1 Bedienungsanleitung

Kramer

Kramer VP-441 Bedienungsanleitung

Kramer

Kramer VP-510 Bedienungsanleitung

Kramer

Kramer VA-680D Bedienungsanleitung

Kramer

Kramer VM-4HC Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung