Kramer VM-50AN Bedienungsanleitung

VM-50AN Quick Start

P/N:

2900- 301264QS

Rev:

Scan for full manual

VM-50AN Quick Start Guide

This guide helps you install and use your VM-50AN for the first time.

Go to www.kramerav.com/downloads/VM-50AN to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s in the box

VM-50AN 1:5 Audio Distributor

4 Rubber feet

Power supply (12V DC)

1 Quick start guide

Step 2: Get to know your VM-50AN

Feature

Function

POWER Switch

Illuminated switch supplying power to the unit

INPUT MODE BAL/UNBAL Button

When released, selects the balanced stereo audio input when pushed in, selects

the unbalanced stereo audio

RIGHT LEVEL Trimmer

Adjusts the right output signal level (use a small screwdriver)

LEFT LEVEL Trimmer

Adjusts the left output signal level (use a small screwdriver)

INPUT 3.5mm Mini Plug Connector

Connects to the unbalanced audio source

INPUT Terminal Block Connector

Connects to the balanced audio source

OUT 3.5mm Mini Plug Connector

Connects to the unbalanced audio acceptor (from 1 to 5)

OUT Terminal Block Connector

Connects to the balanced audio acceptor (from 1 to 5)

12 VDC 200mA

+12V DC connector for powering the unit

Step 3: Mount VM-50AN

Install VM-50AN using one of the following methods:

•Attach the rubber feet and place the unit on a flat surface.

•Mount the unit in a rack using the recommended rack adapter (see www.kramerav.com/product/VM-50AN).

•Ensure that the environment (e.g., maximum ambient temperature & air flow) is compatible for the device.

•Avoid uneven mechanical loading.

•Appropriate consideration of equipment nameplate ratings should be used for avoiding overloading of the circuits.

•Reliable earthing of rack-mounted equipment should be maintained.

Step 4: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your VM-50AN.

To achieve specified extension distances, use the recommended Kramer cables available at www.kramerav.com/product/VM-50AN.

Using third-party cables may cause damage!

Step 5: Connect power

Connect the 12V DC power adapter to VM-50AN and plug it into the mains electricity.

Safety Instructions (See www.kramerav.com for updated safety information)

Caution:

•For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the

terminal or in the User Manual.

•There are no operator serviceable parts inside the unit.

Warning:

•Use only the power cord that is supplied with the unit.

•Disconnect the power and unplug the unit from the wall before installing.

Step 6: Operate VM-50AN

Set the input mode to balanced or unbalanced stereo.

Using a small screwdriver, adjust the output level.

Andere Handbücher für VM-50AN

Inhaltsverzeichnis

Andere Kramer Medienkonverter Handbücher

Kramer

Kramer KDS-EN5 Bedienungsanleitung

Kramer

Kramer VP-451 Bedienungsanleitung

Kramer

Kramer KDS-EN6 Bedienungsanleitung

Kramer

Kramer FC-69 Bedienungsanleitung

Kramer

Kramer VP-471 Bedienungsanleitung

Kramer

Kramer VM-80HP Bedienungsanleitung

Kramer

Kramer VP-2K Bedienungsanleitung

Kramer

Kramer DigiTOOLS VM-2HDMI Bedienungsanleitung

Kramer

Kramer VP-773AMP Bedienungsanleitung

Kramer

Kramer VP-425 Bedienungsanleitung

Kramer

Kramer VP-790 Bedienungsanleitung

Kramer

Kramer VP-434 Bedienungsanleitung

Kramer

Kramer KDS-USB2 Kit Bedienungsanleitung

Kramer

Kramer WP-SW2-EN7 Bedienungsanleitung

Kramer

Kramer FC-101Net Bedienungsanleitung

Kramer

Kramer FC-10Dxl Bedienungsanleitung

Kramer

Kramer FC-7501 Bedienungsanleitung

Kramer

Kramer FC-1DGH Bedienungsanleitung

Kramer

Kramer VP1 Bedienungsanleitung

Kramer

Kramer VP-6AHD Bedienungsanleitung

Kramer

Kramer FC-32 Bedienungsanleitung

Kramer

Kramer FC-174 Bedienungsanleitung

Kramer

Kramer KDS-EN6 Bedienungsanleitung

Kramer

Kramer ACC3-12-SP Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung