Kramer KDS-EN2T Bedienungsanleitung

KRAMER ELECTRONICS LTD.

USER MANUAL

MODELS:

KDS-EN2T

HDMI to IP Transmitter

KDS-EN2R

HDMI to IP Receiver

P/N: 2900-300158 Rev 2

KDS-EN2T, KDS-EN2R – Contents i

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instructions 3

2.3 Recycling Kramer Products 3

3Overview 4

3.1 Using the Cables 5

4Defining the KDS-EN2T and KDS-EN2R 6

4.1 The KDS-EN2T HDMI to IP Transmitter 6

4.2 Your KDS-EN2R 7

4.3 Underside of the KDS-EN2T/KDS-EN2R 8

4.4 Setting the Multicast Group ID 10

5Connecting the KDS-EN2T/KDS-EN2R 11

5.1 KDS-EN2T/KDS-EN2R Transmitter Receiver Setup 11

5.2 Multicasting Setup 13

5.3 Video Wall Setup 15

5.4 Connecting to the KDS-EN2T and KDS-EN2R via RS-232 18

6Configuring the System 19

6.1 Bonjour Service 19

6.2 IP HDMI Utility 19

6.3 Configuring a TV Wall Setup 23

6.4 The Web Pages 27

7Technical Specifications 30

Figures

UFigure 1: KDS-EN2T HDMI to IP TransmitterU6

UFigure 2: KDS-EN2RU7

UFigure 3: KDS-EN2R UndersideU8

UFigure 4: Connecting the HDMI to IP Transmitter and Receiver SystemU12

UFigure 5: Multicasting ApplicationU14

UFigure 6: Connecting the RS-232 Y-cableU16

UFigure 7: Video Wall ApplicationU17

UFigure 8: IP-HDMI Utility Main WindowU20

UFigure 9: Devices Discovered on the NetworkU20

UFigure 10: Check the Devices Discovered on the NetworkU21

UFigure 11: The Get Information WindowU21

UFigure 12: Apply RS-232 and Group ID settingsU22

UFigure 13: System RebootingU22

UFigure 14: TV Wall Setup – Choosing Wall SizeU23

UFigure 15: TV Wall Setup – Setting the Wall Size to 3x3U24

UFigure 16: TV Wall Setup – Setting the Position of each DisplayU24

UFigure 17: TV Wall Setup – Setting the Bezel and Gap CompensationU25

UFigure 18: Advanced Setup – Selecting a device to Fine TuneU25

UFigure 19: Advanced Setup –Fine Tune a deviceU26

UFigure 20: Web Page Version Information WindowU28

UFigure 21: Web Page Firmware Update WindowU28

UFigure 22: Web Page Basic Setup WindowU29

KDS-EN2T, KDS-EN2R - Introduction 1

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:

Sierra Video Products.

Thank you for purchasing the Kramer DigiTOOLS®KDS-EN2T HDMI to IP

Transmitter and/or KDS-EN2R (sold separately), which are ideal for:

•Digital signage, retail centers and leisure facilities

•Transportation hubs, educational facilities and corporate environments

2 KDS-EN2T, KDS-EN2R - Getting Started

2 Getting Started

We recommend that you:

•Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

•Review the contents of this user manual

Go to http://www.kramerelectronics.com to check for up-to-date

user manuals, application programs, and to check if firmware

upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

•Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

•Do not secure the cables in tight bundles or roll the slack into tight coils

•Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

•Position your Kramer KDS-EN2T/KDS-EN2R away from moisture, excessive

sunlight and dust

•It is recommended to operate the system on a dedicated Gigabit Ethernet

network, not to be combined with other network traffic or with access to the

Internet

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

KDS-EN2T, KDS-EN2R - Getting Started 3

2.2 Safety Instructions

Caution: There are no operator serviceable parts inside the unit

Warning: Use only the Kramer Electronics input power wall

adapter that is provided with the unit

Warning: Disconnect the power and unplug the unit from the wall

before installing

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

aims to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility. For details of Kramer’s recycling arrangements in your particular country

go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

4 KDS-EN2T, KDS-EN2R - Overview

3 Overview

The Kramer KDS-EN2T and KDS-EN2R are an IP transmitter (host) and receiver

(client) system for HDMI and bidirectional RS-232 signals. The KDS-EN2T

encodes the input signals to an IP stream and the KDS-EN2R decodes it back to

HDMI and RS-232 signals.

The host-client system lets you stream HD content simultaneously to one or more

HDMI acceptors.

The Kramer KDS-EN2T and KDS-EN2R can be used to distribute Full-HD digital

content from multiple sources to more than 200 remote displays on a LAN without

distance limitations from the 1080p source devices, while sustaining picture and

sound quality.

In addition, the KDS-EN2T/KDS-EN2R features:

•Flexible and scalable HDMI 1080p video broadcasting with Gigabit Ethernet

LAN and no distance limitations

•JPEG 2000 compression technology to send a visually lossless HD image

and digital audio over IP

•Point to point, Multicasting and broadcasting architecture, with limited

bandwidth load (each channel requires about 55Mbps)

•Up to nine transmitters and 81 receivers that can be included in a video wall

system

•HDMI signal transmissions over one CAT 5e, CAT 6 or CAT 7 cable

•Group ID setup via DIP-switches or PC application

•Bidirectional RS-232 Control Pass-through to control HDMI display from the

host (transmitter) side

•Multicasting groups with Gigabit Ethernet switch (requires IEEE 802.1Q

VLAN and IGMP functions)

•System setup via the IP-HDMI PC application and the Web pages

•A compact DigiTOOLS® enclosure with a built-in mounting plate for versatile

installation

KDS-EN2T, KDS-EN2R - Overview 5

Note that the KDS-EN2T/KDS-EN2R is not HDCP compliant and

will not stream HDCP encrypted content and the screen will appear

black.

3.1 Using the Cables

This product uses standard Ethernet cables (CAT 5/6/7). We recommend that you

use Kramer high quality Twisted Pair cables.

6 KDS-EN2T, KDS-EN2R - Defining the KDS-EN2T and KDS-EN2R

4 Defining the KDS-EN2T and KDS-EN2R

This section defines the KDS-EN2T HDMI to IP Transmitter (see Section 4.1) and

KDS-EN2R (see 4.2Section ). 4.3Section

4.1 The KDS-EN2T HDMI to IP Transmitter

defines the underside of both the KDS-

EN2T and KDS-EN2R.

Figure 1 defines the KDS-EN2T:

Figure 1: KDS-EN2T HDMI to IP Transmitter

# Feature Function

1 ON LED Lights green when the power is ON and the system is

active

Blinks when the power is ON and the system is booting

2 LINK LED Lights green to indicate that a link is established

3 DATA LED Lights green when system is active

Blinks when connecting to the receiver or if the HDMI

source is disconnected

4 MODE Button Press the button using a small screwdriver (see

Section 4.3

)

GROUP ID DIP-switches Set the group ID (see Section 4.4

)

5VDC Output BNC Connector +5V DC connector for powering the unit

7 LAN RJ-45 Connector Connects to the LAN RJ-45 connector on the

KDS-EN2R directly or via an Ethernet switch

8 HDMI IN Connector Connects to an HDMI source

9 RS-232 9-pin D-sub Connector Connects to an RS-232 port

KDS-EN2T, KDS-EN2R - Defining the KDS-EN2T and KDS-EN2R 7

4.2 Your KDS-EN2R

Figure 2 defines the KDS-EN2R:

Figure 2: KDS-EN2R

# Feature Function

1 ON LED Lights green when the power is ON and the system is

active

Blinks when the power is ON and the system is booting

2 LINK LED Lights green when LAN is connected

3 DATA LED Lights green when system is active

Blinks when connecting to the transmitter or if the HDMI

source is disconnected

4 MODE Button Press the MODE button using a small screwdriver (see

Section 4.3

)

EDID Button Press the EDID button using a small screwdriver (see

Section 4.3

)

GROUP ID DIP-switches Set the group ID (see Section 4.4

)

5V DC +5V DC connector for powering the unit

8 LAN RJ-45 Connector Connects to the LAN RJ-45 connector on the

KDS-EN2T directly or via an Ethernet switch

9 HDMI OUT Connector Connects to the HDMI acceptor

10 RS-232 9-pin D-sub Connector Connects to an RS-232 port

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kramer Empfänger Handbücher

Kramer

Kramer TOOLS TP-9 Bedienungsanleitung

Kramer

Kramer TP-305A Bedienungsanleitung

Kramer

Kramer 621T Bedienungsanleitung

Kramer

Kramer 706XL Bedienungsanleitung

Kramer

Kramer TP-590Rxr Bedienungsanleitung

Kramer

Kramer TP-578H Bedienungsanleitung

Kramer

Kramer PT-110 Bedienungsanleitung

Kramer

Kramer TOOLS TP-41 Bedienungsanleitung

Kramer

Kramer 713 Bedienungsanleitung

Kramer

Kramer 622R Bedienungsanleitung

Kramer

Kramer 621T Bedienungsanleitung

Kramer

Kramer WP-571 Bedienungsanleitung

Kramer

Kramer VM-1H4C Bedienungsanleitung

Kramer

Kramer 708 Bedienungsanleitung

Kramer

Kramer VP-427X2 Bedienungsanleitung

Kramer

Kramer 670T Bedienungsanleitung

Kramer

Kramer RC-IR2 Bedienungsanleitung

Kramer

Kramer TP-100AXR Bedienungsanleitung

Kramer

Kramer EXT3-U-KIT Bedienungsanleitung

Kramer

Kramer DigiTOOLS TP-580RA Bedienungsanleitung

Kramer

Kramer WP-120 Bedienungsanleitung

Kramer

Kramer C-A35M/IRR-03 Bedienungsanleitung

Kramer

Kramer KW-14T-IL Bedienungsanleitung

Kramer

Kramer TOOLS TP-220HD Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung

Dish Network

Dish Network Satellite Television Bedienungsanleitung