Kramer SPK-C612 Bedienungsanleitung

KRAMER ELECTRONICS LTD.

USER MANUAL

MODELS:

SPK-C612

Closed-back Ceiling Speakers

SPK-C412

Closed-back Ceiling Speakers

SPK-C411

Closed-back Ceiling Speakers

P/N: 2900-300113 Rev 1

Closed-back Ceiling Speakers – Contents i

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

3Overview 3

4Your Closed-back Ceiling Speakers 4

5Installing the Closed-back Ceiling Speakers 6

5.1 Choosing the Best Location 6

5.2 Cutting the Ceiling Tile 6

5.3 Mounting the Speakers 7

5.4 Painting the Speaker 10

6Technical Specifications 11

Figures

UFigure 1: Closed-back Ceiling Speakers in a Boardroom SetupU3

UFigure 2: SPK-C612 Closed-back Ceiling SpeakerU4

UFigure 3: SPK-C412 / SPK-C411 Closed-back Ceiling SpeakerU4

UFigure 4: Closed-back Ceiling Speaker Schematic DiagramU5

UFigure 5: Installing the Closed-back Ceiling SpeakersU7

UFigure 6: Plugging and Securing the CableU8

UFigure 7: Tighten the Mounting TabsU9

UFigure 8: Adjust Tap Selector (for the SPK-C612)U9

Closed-back Ceiling Speakers - Introduction 1

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront the video, audio, presentation, and broadcasting

professional on a daily basis. In recent years, we have redesigned and upgraded

most of our line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix

Switchers; GROUP 3: Control Systems; GROUP 4: Format/Standards Converters;

GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products;

GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors;

GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters and

GROUP 11: Sierra Products.

Congratulations on purchasing your Kramer SPK-C612, SPK-C412 and

SPK-C411 Closed-back Ceiling Speakers, which are ideal for the following typical

applications:

•Boardrooms •Presentation venues

•Conference Rooms •Training Rooms

•Educational classrooms •Hotel lobbies

The package includes the following items:

•A pair of SPK-C612 and/or SPK-C412 and/or SPK-C411 speakers

•Mounting kit

•This user manual

2 Closed-back Ceiling Speakers - Getting Started

2 Getting Started

We recommend that you:

•Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

•Review the contents of this user manual

•Use Kramer high-performance high-resolution cables

Go to http://www.kramerelectronics.com to check for up-to-date

user manuals, application programs, and to check if firmware

upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

•Use only good quality connection cables (such as the Kramer BC-2S) to

avoid interference, deterioration in signal quality due to poor matching, and

elevated noise levels (often associated with low quality cables)

•Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

•Position your Kramer Closed-back Ceiling Speakers away from moisture,

excessive sunlight and dust

To ensure that you obtain the best sound results, do not open the

housing of the passive speaker or the active speaker.

Closed-back Ceiling Speakers - Overview 3

3 Overview

The Closed-back Ceiling speakers consist of a pair of high performance closed

back speakers. The pair can be mounted on the ceiling, as well as via a ceiling

mounting kit used to safely secure the speakers to the ceiling. The speakers are

defined in the following table:

Name Diameter [ " ] Resistance [

Ω

] Closed-back Depth [ " ]

SPK-C612 6.5 8 7

SPK-C412 4 8 4

SPK-C411 4 4 4

Figure 1 shows an example of how the Closed-back Ceiling speakers can be

installed in a boardroom setup:

Figure 1: Closed-back Ceiling Speakers in a Boardroom Setup

4 Closed-back Ceiling Speakers - Your Closed-back Ceiling Speakers

4 Your Closed-back Ceiling Speakers

Figure 2 and Figure 3 define the SPK-C612 and the SPK-C412 and SPK-C411,

respectively.

Figure 2: SPK-C612 Closed-back Ceiling Speaker

Figure 3: SPK-C412 / SPK-C411 Closed-back Ceiling Speaker

Closed-back Ceiling Speakers - Your Closed-back Ceiling Speakers 5

The following table defines the Closed-back Ceiling speaker hardware items (per

speaker pair) for each model in the series:

Description

A pair of

ceiling

speakers

(one shown)

Two grilles

(one shown)

Cutout

template

This table defines the ceiling mounting kit items:

Four

support

ring

screws

Two ceiling

support rings

(C-ring) – one

shown

Two pairs of

tile rails –

one of a pair

shown

Each Closed-back Ceiling speaker is supported by a C-ring and two tile rails. The tile

rails prevent the speakers from falling if the tile itself comes out or falls apart, as

their ends catch onto the T-grid. When mounting onto the ceiling tiles, use both

supports. When mounting onto a sheetrock ceiling, the C-ring alone is used to

reinforce the ceiling material.

Be sure that the tiles can support the speaker. Smaller sized tiles or

fiberglass-type tiles cannot support the weight of the speakers.

When this is the case, the speakers will need additional support.

Figure 4 shows a schematic diagram of the Closed-back Ceiling speaker:

Figure 4: Closed-back Ceiling Speaker Schematic Diagram

6 Closed-back Ceiling Speakers - Installing the Closed-back Ceiling Speakers

5 Installing the Closed-back Ceiling Speakers

This section explains how to install the closed-back ceiling speakers, that is:

•Choosing the best place to locate your speakers (see Section 5.1

•Cutting the ceiling tile (see

)

Section 5.2

•Mounting the Speakers (see

)

Section 5.3

•Painting the speakers (see

)

Section 5.4

5.1 Choosing the Best Location

)

Ideally, locate the speakers above the main listening area. Before doing so, be

sure that:

•The desired location is free of obstructions, such as electrical piping, AC

ducts or water lines, and so on

•There is enough space behind the mounting surface for the speakers

•The rear side of the speaker is not blocked by wall studs or other objects

5.2 Cutting the Ceiling Tile

To cut the ceiling tile, do the following:

1. Remove the circle in the supplied template.

Keep this template for later use as a mask, as you may want to paint the speakers (see

Section 5.4

2. Mark the opening in the correct location by tracing the hole in the template.

)

3. Cut out the hole according to the template or with a circular cutter set to the

appropriate cutout size.

Initially, you can cut a smaller area inside the marked hole just to be sure that the

space above the speakers is clear

4. Route the wiring from the amplifier to the speakers’ cutout holes, taking care

not to place them next to electrical wires or at least at a distance of about

two feet from an AC line.

Closed-back Ceiling Speakers - Installing the Closed-back Ceiling Speakers 7

Do not nail or staple the speaker wires.

If you are mounting the speakers onto a ceiling tile, remove the ceiling tiles where

you plan to install the speakers. Use the template to trace and then cutout the

speaker hole over an empty box.

The closed-back ceiling speakers are supported by the ceiling mounting kit (two C-

rings and two pairs of tile rails; the tile rails prevent the speakers from falling if the

tile itself comes out or falls apart, as their ends catch onto the T-grid). When

mounting onto the ceiling tiles, use both supports.

Be sure that the tiles can support the speaker. Smaller sized tiles or

fiberglass-type tiles cannot support the weight of the speakers.

When this is the case, the speakers will need additional support.

When mounting onto a sheetrock ceiling, the C-ring alone is used to reinforce the

ceiling material.

5.3 Mounting the Speakers

To install the closed-back ceiling speakers, do the following:

1. Place the C-ring over the hole cut in the ceiling tile (on the “ceiling” side).

Place it around the hole so that the tabs are located in parallel to the tile

edges.

Figure 5: Installing the Closed-back Ceiling Speakers

T-channel Grid

Support Ring

Screws

Ceiling Tile

Tile Rails

C-ring

8 Closed-back Ceiling Speakers - Installing the Closed-back Ceiling Speakers

2. Place the tile rails on the tile and snap them into the two tabs on the C-ring.

Align the rails so that the ends extend over the T-channel grid.

3. Insert a screw through each tab on the C-ring to secure the rails.

4. Connect the speaker wires to the appropriate connector terminals:

PIN 1 and PIN 2 are connected internally and are positive (+)

PIN 3 and PIN 4 are connected internally and are negative (-)

Screw the hold-down screws on the connector until tight, using a small

screwdriver.

You can connect the speakers in the two following possible layouts:

Wiring in parallel: connect the wire pair of the subsequent speaker to

PIN 2 and PIN 3. When one input connector is removed, subsequent

speakers will remain connected (see Figure 4)

Daisy-chaining: connect the wire pair of the subsequent speaker to

PIN 1 and PIN 4. When one input connector is removed, subsequent

speakers will be disconnected (see Figure 4)

5. Plug the connector into the socket in the terminal cup of the speaker (see

Figure 6).

6. Run the wires through the wires’ opening in the input terminal cover plug

and then into the terminal block connector of the speaker.

Figure 6: Plugging and Securing the Cable

7. Push the speaker into the ceiling hole until the front baffle rim is leveled with

the ceiling.

Andere Handbücher für SPK-C612

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kramer Sprecher Handbücher

Kramer

Kramer SPK-W511 Bedienungsanleitung

Kramer

Kramer Yarden 6-ID SPK-I651T-KI Bedienungsanleitung

Kramer

Kramer Galil 6-I Bedienungsanleitung

Kramer

Kramer Galil 6-AW Bedienungsanleitung

Kramer

Kramer Galil 8-CO Bedienungsanleitung

Kramer

Kramer SPK-CC678 Bedienungsanleitung

Kramer

Kramer Galil 2-C Bedienungsanleitung

Kramer

Kramer SPK-C611 Bedienungsanleitung

Kramer

Kramer KADS-100 Bedienungsanleitung

Kramer

Kramer Tavor 5-O Bedienungsanleitung

Kramer

Kramer SPK-W612 Bedienungsanleitung

Kramer

Kramer SPK-W611 Bedienungsanleitung

Kramer

Kramer Yarden VT-1 Bedienungsanleitung

Kramer

Kramer SPK-CCF848 Bedienungsanleitung

Kramer

Kramer SPK-CO608 Bedienungsanleitung

Kramer

Kramer Yarden 4-C SPK-C421-K Bedienungsanleitung

Kramer

Kramer SPK-W613 Bedienungsanleitung

Kramer

Kramer Galil 6-AWAll Bedienungsanleitung

Kramer

Kramer Tavor 8-T Bedienungsanleitung

Kramer

Kramer SPK-WA511 Bedienungsanleitung

Kramer

Kramer SPK-C411 Bedienungsanleitung

Kramer

Kramer Galil 4-C Bedienungsanleitung

Kramer

Kramer Galil 6-AW Bedienungsanleitung

Kramer

Kramer Galil 4-D Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung