Kramer Tavor 6-O Bedienungsanleitung

USER MANUAL

MODEL:

Tavor 6-O

On-Wall Active Speakers

P/N: 2900-300516 Rev 1 www.kramerAV.com

Tavor 6-O – Contents

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Recycling Kramer Products 3

3Overview 4

4Defining the Tavor 6-O 6

5Installing the Speakers 8

5.1 Choosing the Best Location 8

5.2 Installing the Speaker Wires 8

6Technical Specifications 10

Figures

Figure 1: Active On-Wall Speakers in a Home Theater Setup 5

Figure 2: Active On-Wall Speakers in a Conference Room Setup 5

Figure 3: Tavor 6-O Active Speaker 6

Figure 4: Connecting the Active Speaker to the Passive Speaker 8

Tavor 6-O - Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 14 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11:

Sierra Video Products; GROUP 12: Digital Signage; GROUP 13: Audio; and

GROUP 14: Collaboration.

Congratulations on purchasing your Kramer Tavor 6-O On-Wall Active Speakers,

which are ideal for the following typical applications:

Boardrooms

Presentation venues

Conference rooms

Home theater

Educational classrooms

Tavor 6-O - Getting Started

2 Getting Started

We recommend that you:

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

Review the contents of this user manual

Go to http://www.kramerav.com/downloads/TAVOR 6-O to check for up-to-

date user manuals, application programs, and to check if firmware upgrades

are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

Use only good quality connection cables (such as the Kramer BC-2S) to avoid

interference, deterioration in signal quality due to poor matching, and elevated

noise levels (often associated with low quality cables)

Do not secure the cables in tight bundles or roll the slack into tight coils

Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

Position your Kramer Tavor 6-O away from moisture, excessive sunlight and

dust

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

Do not open the housing of the speaker; doing so may reduce the

quality of the sound.

Tavor 6-O - Getting Started

2.2 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

aims to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility. For details of Kramer’s recycling arrangements in your particular country

go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

Tavor 6-O - Overview

3 Overview

The Tavor 6-O is a powered two-way speaker system designed for indoor wall

mounting. The system accepts a line level stereo input and amplifies it using a

built-in amplifier and outputs a speaker signal to the passive speaker.

The Tavor 6-O speaker system features:

Three available inputs (for connecting to the individual input needed, or

connecting simultaneously to form a mix of the inputs) that consist of:

A Line level unbalanced stereo audio input on a 3.5mm mini jack

connector

A balanced stereo audio input on a 5-pin terminal block connector

An unbalanced stereo audio input on two RCA connectors

An output to a non-amplified speaker

A unique looping output, letting you chain additional pairs of active and

passive speakers

TREBLE, BASS and VOLUME control knobs

A control panel on the back of the active speaker that controls all the

functions of both speakers

A magnetic shield

Enhanced bass reflex design

An integrated 2x50W stereo amplifier (no external amplifier required)

A self-adjusting power range of 90 to 240V AC

Auto-ON selector button

The Tavor 6-O is enclosed in an ABS cabinet and can be mounted indoors on the

wall, vertically or horizontally. The mounting brackets are made of hardened steel

that attach to each speaker, letting you rotate each speaker to the left or right

when installed vertically (or up and down if installed horizontally).

Tavor 6-O - Overview

Figure 1 and Figure 2 show examples of how the speakers can be installed in

conference room and home theater setups, respectively.

Figure 1: Active On-Wall Speakers in a Home Theater Setup

Figure 2: Active On-Wall Speakers in a Conference Room Setup

Tavor 6-O - Defining the Tavor 6-O

4 Defining the Tavor 6-O

This section defines the active Tavor 6-O:

Figure 3: Tavor 6-O Active Speaker

Tavor 6-O - Defining the Tavor 6-O

Feature

Function

ON/AUTO Switch

Set to AUTO for the speakers to enter the

standby mode when idle for over 10 minutes.

Once a signal is detected the speakers power

up again.

Set to ON to keep the speaker powered

continuously

SPEAKER OUT Connectors

Connect the active speaker to the (+) and (-)

stereo sockets on the passive speaker

The L speaker is active and the R speaker is

passive

PWR/STBY LED

Illuminates in green when powered (ON/AUTO

switch set to ON or AUTO –see item 1)

illuminates in red when in the standby mode

(ON/AUTO switch is set to AUTO –see item 1)

In the AUTO mode (ON/AUTO switch is set to

AUTO –see item 1), the LED illuminates

green if an input signal is detected and

illuminates red if idle for over 10 minutes

INPUT

Connectors

5-pin Terminal Block

Connect the audio source to one or more of the

input connectors

L and R RCA

3.5mm Mini Jack

BASS Control Knob

Rotate the button to control the bass

TREBLE Control Knob

Rotate the button to control the treble

VOLUME Control knob

Rotate the button to adjust the audio volume

AC-Input Power Supply (self-

adjusting)

Connect to the AC power cord

POWER Switch

For turning the unit ON (–) or OFF (O)

LOOP OUTPUT 3.5mm Mini Jack

Connector

Connect to another pair of active speakers

SUB OUT 3.5mm Mini Connector

If required, connect an active sub-woofer to this

output for maximum bass reproduction

Inhaltsverzeichnis

Andere Kramer Sprecher Handbücher

Kramer

Kramer Galil 4-D Bedienungsanleitung

Kramer

Kramer Yarden 6-O Bedienungsanleitung

Kramer

Kramer SPK-W611 Bedienungsanleitung

Kramer

Kramer Yarden 6-C Bedienungsanleitung

Kramer

Kramer SPK-CC688 Bedienungsanleitung

Kramer

Kramer SPK-C611 Bedienungsanleitung

Kramer

Kramer Galil 5-O SPK-W511T Bedienungsanleitung

Kramer

Kramer Galil 8-C Bedienungsanleitung

Kramer

Kramer SPK-OC508 Bedienungsanleitung

Kramer

Kramer Yarden 8-T SPK-C820T Bedienungsanleitung

Kramer

Kramer Galil 8-CO Bedienungsanleitung

Kramer

Kramer Yarden 4-C SPK-C421-K Bedienungsanleitung

Kramer

Kramer SPK-CO608 Bedienungsanleitung

Kramer

Kramer SPK-C612 Bedienungsanleitung

Kramer

Kramer Galil 6-AW Bedienungsanleitung

Kramer

Kramer SPK-CC348F Bedienungsanleitung

Kramer

Kramer SPK-W411T Bedienungsanleitung

Kramer

Kramer Galil 2-C Bedienungsanleitung

Kramer

Kramer SPK-C612 Bedienungsanleitung

Kramer

Kramer Galil 6-I Bedienungsanleitung

Kramer

Kramer SPK-CCF848 Bedienungsanleitung

Kramer

Kramer SPK-C612 Installations- und Betriebshandbuch

Kramer

Kramer SPK-W612 Bedienungsanleitung

Kramer

Kramer SPK-OCA504 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung