Kramer MV-6 Bedienungsanleitung

KRAMER ELECTRONICS LTD.

USER MANUAL

MODEL:

MV-6

3G HD-SDI Multiviewer

P/N: 2900-000737 Rev 8

MV-6 – Contents

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instructions 3

2.3 Recycling Kramer Products 3

3Overview 4

3.1 Accessory to Medical Equipment (IEC 60601-1) 5

3.2 Defining the MV-6 3G HD-SDI Multiviewer 5

4Installing in a Rack 9

5Connecting the MV-6 10

5.1 Connecting to the RS-232 Port 11

5.2 Connecting via Ethernet 12

6Operating the MV-6 Locally 16

6.1 Using the Display 16

6.2 Adjusting the Size of a Window 16

6.3 Adjusting the Position of a Window 17

6.4 Defining and Saving a Custom Window Layout 17

6.5 Recalling a Window Layout 18

6.6 Freezing/Releasing a Video Output 18

6.7 Locking the Front Panel 18

6.8 Resetting the Device to Factory Defaults 19

6.9 Using the Menu 19

7Operating the MV-6 Remotely 23

7.1 Operating the MV-6 via the RS-232 Serial Port 23

7.2 MV-6 Controller Software 23

7.3 The Menu Bar 25

7.4 Upgrading the Firmware 36

8Technical Specifications 37

9Default Communication Parameters 38

10 Kramer Protocol 3000 Syntax 39

10.1 Host Message Format 39

10.2 Device Message Format 39

10.3 Command Terms 40

10.4 Entering Commands 41

10.5 Bidirectional Definition 41

10.6 Command Chaining 41

10.7 Maximum String Length 42

10.8 Backward Support 42

11 Protocol 3000 Commands 43

11.1 System Commands - Mandatory 43

11.2 System Commands 48

11.3 Video Commands 52

11.4 Multiviewer Commands 55

11.5 Communication Commands 61

12 Parameters 65

12.1 On/Off 65

12.2 Color Space 65

12.3 Genlock Types 65

MV-6 - Contents

12.4 Stage 65

12.5 Video Resolutions 65

12.6 Custom Resolution Parameters 67

12.7 View Modes 67

12.8 Font Size 68

Figures

Figure 1: MV-6 3G HD-SDI Multiviewer Front Panel 6

Figure 2: MV-6 3G HD-SDI Multiviewer Rear Panel 8

Figure 3: Connecting the MV-6 3G HD-SDI Multiviewer 11

Figure 4: Local Area Connection Properties Window 13

Figure 5: Internet Protocol Version 4 Properties Window 13

Figure 6: Internet Protocol Version 6 Properties Window 14

Figure 7: Internet Protocol Properties Window 14

Figure 8: MV-6 Controller Software Main Window 24

Figure 9: Quick Access Toolbar 26

Figure 10: Connect Window 27

Figure 11: Windows Position 28

Figure 12: Switch Buttons 29

Figure 13: Layer Order 30

Figure 14: Switching an Input to a Window 31

Figure 15: Windows Setup Window 32

Figure 16: Input Button Properties Window 33

Figure 17: Device Details Window 34

Figure 18: About MV-6 Window 36

MV-6 - Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 14 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11:

Sierra Video Products; GROUP 12: Digital Signage; GROUP 13: Audio; and

GROUP 14: Collaboration.

Congratulations on purchasing your Kramer MV-6 3G HD-SDI Multiviewer, which

is ideal for the following typical applications:

Professional broadcasting and production studios

Presentation applications

3G HD-SDI multi-viewing for medical equipment

MV-6 - Getting Started

2 Getting Started

We recommend that you:

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

Review the contents of this user manual

Go to http://www.kramerelectronics.com/support/product_downloads.asp

to check for up-to-date user manuals, application programs, and to check if

firmware upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

Do not secure the cables in tight bundles or roll the slack into tight coils

Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

Position your Kramer MV-6 away from moisture, excessive sunlight and dust

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

MV-6 - Getting Started

2.2 Safety Instructions

Caution:

There are no operator serviceable parts inside the unit

Warning:

Use only the power cord that is supplied with the unit

Warning:

Do not open the unit. High voltages can cause

electrical shock! Servicing by qualified personnel only

Warning:

Disconnect the power and unplug the unit from the wall

before installing

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

aims to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility. For details of Kramer’s recycling arrangements in your particular country

go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

MV-6 - Overview

3 Overview

The MV-6 is a versatile, high-performance video viewer for signals up to 3G

HD-SDI. The device can window up to six sources in any layout and output the

image in SDI, HDMI and CV formats. Both preprogrammed and customizable

screen division is supported.

In particular, the MV-6 features:

Input bandwidth of up to 3Gbps which supports standard definition, high

definition and 3G high definition serial digital video signals (SD/HD/3G

HD-SDI)

Standard Definition (SD) means an NTSC or PAL compatible video format consisting of

480 (for NTSC) or 576 (for PAL) lines of interlaced video.

High Definition (HD) means a video format consisting of 720 active lines of progressive

video or 1080 lines of progressive or interlaced video.

SMPTE 259M, 292M and 424M input compliance and support for data rates

of 270Mbps, 1483.5Mbps, 1485Mbps, 2967Mbps and 2970Mbps

Input cable equalization up to 350m (1150ft) for SD signals, 140m for

1.5GHz HD signals, and 120m (394ft) for 3GHz HD signals

Multi-video output formats; HD-SDI (292M) and 3G HD-SDI (SMPTE 424M),

HDMI and composite

Front panel color LCD preview screen for real-time display of output

Kramer re-Klocking™ and equalization on each input – rebuilds the digital

signal to travel longer distances

Flexible control options; front panel with menu LCD and on-screen displays,

Ethernet, and RS-232

Screen handling buttons; freeze, size, position, and four pre-programmed

and two user-definable layouts

Medical equipment compliance

MV-6 - Overview

The MV-6 is housed in a 2U height enclosure and is fed from a 100-240 VAC

universal switching power supply. The device can be controlled via the front panel

buttons and remotely via:

RS-232 serial commands transmitted by a PC, touch-screen system or other

serial controller

Ethernet over a LAN

3.1 Accessory to Medical Equipment (IEC 60601-1)

In the modern medical environment remote access is essential, for example, to

transfer clinical data between doctors and to train to medical students. The MV-6

is certified according to the IEC 60601-1-2, Clause 2.1.3, Medical Electrical

Equipment, Part 1: General Requirements for EMC standard which is required

when accessory devices are used at locations where medical personnel and

patients are present.

The MV-6 constitutes an optional component that can be considered necessary

and suitable as part of medical equipment or for use as part of a medical system to

provide real time simultaneous video feeds to those present at the local medical

environment and at remote locations. In this environment, the MV-6 can be added

to the system ONLY if the connecting equipment has been evaluated and meets

the IEC 60601-1-2 EMC standards. Note, that when attaching accessory devices

to a digital or analog interface, they must comply with the IEC standard for which

they are used: EMC Standard (IEC 60601-1-2), Information Technology equipment

(IEC 60950-1 (2ed)).

3.2 Defining the MV-6 3G HD-SDI Multiviewer

This section defines the MV-6.

MV-6 - Overview

Figure 1: MV-6 3G HD-SDI Multiviewer Front Panel

Feature

Function

LCD Video Preview Screen

LCD screen to display the output signal

WINDOW Buttons (A to F)

Press to select one of the windows

INPUT Buttons (1 to 6)

Press to select the active input following selection of an active window (using the WINDOW buttons)

LCD Menu 2 Line x 16

Character Window/Input or

Menu Display

During normal operation the Window/Input list is displayed. During menu operations, the

Menu/parameter/values are displayed (see Section 6.9)

Menu Navigation Buttons

Press the up (▲), down (▼), left (◄) and right (►) buttons to navigate the menu, parameters or values

ENTER Button

Press to enter the menu or accept the parameter/value

PANEL LOCK Button

Press and hold to lock the front panel buttons. Press and hold again to unlock the buttons (see

Section 6.7)

Screen Layout Button

(6 windows)

Press to display and output all six inputs as per the pattern

Screen Layout Button

(4 windows)

Press to display and output four selected inputs in a quad pattern

Screen Layout Button

(full screen)

Press to display and output one selected input as a full screen

Screen Layout Button

(2 windows)

Press to display and output two selected inputs as per the pattern

MV-6 –Overview

Andere Handbücher für MV-6

Inhaltsverzeichnis

Andere Kramer Schalten Handbücher

Kramer

Kramer Wall Plate Series Bedienungsanleitung

Kramer

Kramer SP-14 Bedienungsanleitung

Kramer

Kramer VP-438 Bedienungsanleitung

Kramer

Kramer VM-214DT Bedienungsanleitung

Kramer

Kramer VS-41HC Bedienungsanleitung

Kramer

Kramer VP-23C Bedienungsanleitung

Kramer

Kramer VP-443 Bedienungsanleitung

Kramer

Kramer 6241HDx1 Bedienungsanleitung

Kramer

Kramer VM-22H Bedienungsanleitung

Kramer

Kramer VP-41 Bedienungsanleitung

Kramer

Kramer VP-311DVI Bedienungsanleitung

Kramer

Kramer VS-120 Bedienungsanleitung

Kramer

Kramer VP-23DS Bedienungsanleitung

Kramer

Kramer VP-23 Bedienungsanleitung

Kramer

Kramer VP-740 ProScale Bedienungsanleitung

Kramer

Kramer VP-81SID Bedienungsanleitung

Kramer

Kramer WP-211T Bedienungsanleitung

Kramer

Kramer VS-161H Bedienungsanleitung

Kramer

Kramer VP-690 Bedienungsanleitung

Kramer

Kramer TOOLS VP-211K Bedienungsanleitung

Kramer

Kramer VP-24 Bedienungsanleitung

Kramer

Kramer VP-734 Bedienungsanleitung

Kramer

Kramer VP-440H2 Bedienungsanleitung

Kramer

Kramer 6241 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch