KSB Amacan P 700 - 470 Montageanleitung

Submersible Pump in Discharge Tube

Amacan P

(60Hz)

Amacan P 700 - 470

Amacan P 800/900 - 540

Amacan P 1000 - 700

Amacan P 1200 - 870

Amacan P 1500 - 1060

Installation/Operating Manual

Order number: 9972645218-200

Legal information/Copyright

Installation/Operating Manual Amacan P

Original operating manual

processed for any other purpose, nor otherwise transmitted, published or made available to a third party without

the manufacturer's express written consent.

Subject to technical modification without prior notice.

Contents

Glossary .................................................................................................5

1 General ..................................................................................................6

1.1 Principles ...........................................................................................................6

1.2 Installation of partly completed machinery .................................................... 6

1.3 Target group ..................................................................................................... 6

1.4 Other applicable documents ............................................................................ 6

1.5 Symbols .............................................................................................................6

2 Safety .....................................................................................................7

2.1 Key to safety symbols/markings ....................................................................... 7

2.2 General .............................................................................................................. 7

2.3 Intended use .....................................................................................................7

2.4 Personnel qualification and training ............................................................... 8

2.5 Consequences and risks caused by non-compliance with these operating

instructions ........................................................................................................ 8

2.6 Safety awareness ..............................................................................................8

2.7 Safety information for the operator/user ....................................................... 9

2.8 Safety information for maintenance, inspection and installation work ....... 9

2.9 Unauthorized modes of operation .................................................................. 9

3 Transport/Temporary Storage/Disposal .............................................10

3.1 Transport ......................................................................................................... 10

3.2 Storage/preservation ...................................................................................... 13

3.3 Return to supplier ........................................................................................... 13

3.4 Disposal ...........................................................................................................14

4 Description of the Pump (Set) ............................................................15

4.1 General description ........................................................................................ 15

4.2 Designation ..................................................................................................... 15

4.3 Name plate ...................................................................................................... 15

4.4 Design details .................................................................................................. 16

4.5 Type of installation ......................................................................................... 16

4.6 Configuration and function ........................................................................... 17

4.7 Scope of supply ............................................................................................... 17

4.8 Dimensions and weights ................................................................................18

5 Installation at Site ...............................................................................19

5.1 Safety regulations ........................................................................................... 19

5.2 Checks to be carried out prior to installation ............................................... 19

5.3 Installing the pump set in the discharge tube .............................................. 21

5.4 Electrical system .............................................................................................. 22

6 Commissioning/Start-up/Shutdown ...................................................27

Contents

Amacan P 3 of 68

6.1 Commissioning/start-up ................................................................................. 27

6.2 Operating limits .............................................................................................. 28

6.3 Shutdown/storage/preservation .................................................................... 29

6.4 Returning to service .......................................................................................30

7 Servicing/Maintenance .......................................................................31

7.1 Safety regulations ........................................................................................... 31

7.2 Servicing/inspection ........................................................................................ 31

7.3 Drainage/disposal ........................................................................................... 38

7.4 Dismantling the pump set .............................................................................. 38

7.5 Reassembling the pump set ........................................................................... 43

7.6 Tightening torques ......................................................................................... 52

7.7 Spare parts stock ............................................................................................. 53

8 Trouble-shooting ................................................................................54

9 Related Documents ............................................................................55

9.1 General assembly drawing ............................................................................. 55

9.2 Wiring diagrams ............................................................................................. 60

9.3 Outline drawing ............................................................................................. 62

9.4 Dimensions of the discharge tube ................................................................. 64

10 Certificate of Decontamination .........................................................65

Contents

4 of 68 Amacan P

Glossary

Certificate of decontamination

A certificate of decontamination is required to

return the pump to the manufacturer. In the

certificate of decontamination the customer

certifies that the pump (set) has been properly

drained to eliminate any environmental and

health hazards arising from components in

contact with the fluid handled.

Close-coupled design

Motor directly fitted to the pump via a flange

or a drive lantern

ECB (ever clean blade) design

Self-cleaning vane profile

Submersible pump in discharge tube

A submersible motor pump which is completely

submerged and suspended in a discharge tube

Glossary

Amacan P 5 of 68

1 General

1.1 Principles

This operating manual is supplied as an integral part of the type series and variants

indicated on the front cover. The manual describes the proper and safe use of this

equipment in all phases of operation.

The name plate indicates the type series and size, the main operating data, the order

number and the order item number. The order number and order item number

uniquely identify the pump (set) and serve as identification for all further business

processes.

In the event of damage, contact your nearest KSB service center immediately to

maintain the right to claim warranty.

1.2 Installation of partly completed machinery

To install partly completed machinery supplied by KSB, refer to the sub-sections

under Servicing/Maintenance.

1.3 Target group

This operating manual is aimed at the target group of trained and qualified specialist

technical personnel. (⇨ Section 2.4 Page 8)

1.4 Other applicable documents

Table 1: Overview of other applicable documents

Document Contents

Data sheet Description of the technical data of the pump (set)

Hydraulic characteristic curve Characteristic curves showing head, NPSH

required, efficiency and power input

General assembly drawing1) Sectional drawing of the pump set

Sub-supplier product literature1) Operating manuals and other product literature

of accessories and integrated machinery

components

Spare parts lists1) Description of spare parts

For accessories and/or integrated machinery components observe the product

literature of the corresponding manufacturer.

1.5 Symbols

Table 2: Symbols used in this manual

Symbol Description

✓Conditions which need to be fulfilled before proceeding with the

step-by-step instructions

⊳Safety instructions

⇨Result of an action

⇨Cross-references

Step-by-step instructions

Note

Recommendations and important information on how to handle

the product

1) If agreed to be included in the scope of supply

1 General

6 of 68 Amacan P

2 Safety

All the information contained in this section refers to hazardous situations.

2.1 Key to safety symbols/markings

Table 3: Definition of safety symbols/markings

Symbol Description

!DANGER

DANGER

This signal word indicates a high-risk hazard which, if not avoided,

will result in death or serious injury.

!WARNING

WARNING

This signal word indicates a medium-risk hazard which, if not

avoided, could result in death or serious injury.

CAUTION

This signal word indicates a hazard which, if not avoided, could

result in damage to the machine and its functions.

General hazard

In conjunction with one of the signal words this symbol indicates a

hazard which will or could result in death or serious injury.

Electrical hazard

In conjunction with one of the signal words this symbol indicates a

hazard involving electrical voltage and identifies information about

protection against electrical voltage.

Machine damage

In conjunction with the signal word CAUTION this symbol indicates

a hazard for the machine and its functions.

2.2 General

This manual contains general installation, operating and maintenance instructions

that must be observed to ensure safe pump operation and prevent personal injury

and damage to property.

The safety information in all sections of this manual must be complied with.

This manual must be read and completely understood by the responsible specialist

personnel/operators prior to installation and commissioning.

The contents of this manual must be available to the specialist personnel at the site

at all times.

Information attached directly to the pump must always be complied with and be

kept in a perfectly legible condition at all times. This applies to, for example:

▪Arrow indicating the direction of rotation

▪Markings for connections

▪Name plate

The operator is responsible for ensuring compliance with all local regulations which

are not taken into account in this manual.

2.3 Intended use

The pump (set) must only be operated within the operating limits described in the

other applicable documents.

▪Only operate pumps/pump sets which are in perfect technical condition.

▪Do not operate partially assembled pumps/pump sets.

▪Only use the pump to handle the fluids specified in the data sheet or product

literature of the respective design variant.

▪Never operate the pump without the fluid to be handled.

!DANGER

2 Safety

Amacan P 7 of 68

▪Observe the limits for continuous operation specified in the data sheet or

product literature (Qmin2) and Qmax3)) (to prevent damage such as shaft fracture,

bearing failure, mechanical seal damage, etc).

▪Observe the maximum flow rates indicated in the data sheet or product

literature (to prevent overheating, mechanical seal damage, cavitation damage,

bearing damage, etc).

▪Consult the manufacturer about any use or mode of operation not described in

the data sheet or product literature.

Prevention of foreseeable misuse

▪Observe the minimum flow velocities required to fully open the swing check

valves to prevent the reduction of pressure and risk of clogging.

(Contact the manufacturer for the required minimum flow velocities/loss

coefficients.)

▪Never exceed the permissible operating limits (pressure, temperature, etc.)

specified in the data sheet or product literature.

▪Observe all safety information and instructions in this manual.

2.4 Personnel qualification and training

All personnel involved must be fully qualified to install, operate, maintain and

inspect the machinery this manual refers to.

The responsibilities, competence and supervision of all personnel involved in

installation, operation, maintenance and inspection must be clearly defined by the

operator.

Deficits in knowledge must be rectified by means of training and instruction

provided by sufficiently trained specialist personnel. If required, the operator can

commission the manufacturer/supplier to train the personnel.

Training on the pump (set) must always be supervised by technical specialist

personnel.

2.5 Consequences and risks caused by non-compliance with these operating

instructions

▪Non-compliance with these operating instructions will lead to forfeiture of

warranty cover and of any and all rights to claims for damages.

▪Non-compliance can, for example, have the following consequences:

– Hazards to persons due to electrical, thermal, mechanical and chemical

effects and explosions

– Failure of important product functions

– Failure of prescribed maintenance and servicing practices

– Hazard to the environment due to leakage of hazardous substances

2.6 Safety awareness

In addition to the safety information contained in this manual and the intended use,

the following safety regulations shall be complied with:

▪Accident prevention, health and safety regulations

▪Explosion protection regulations

▪Safety regulations for handling hazardous substances

▪Applicable standards and laws

2) Minimum permissible flow rate

3) Maximum permissible flow rate

2 Safety

8 of 68 Amacan P

2.7 Safety information for the operator/user

▪The operator shall fit contact guards for hot, cold and moving parts and check

that the guards function properly.

▪Do not remove any contact guards during operation.

▪Provide the personnel with protective equipment and make sure it is used.

▪Contain leakages (e.g at the shaft seal) of hazardous fluids handled (e.g.

explosive, toxic, hot) so as to avoid any danger to persons and the environment.

Adhere to all relevant laws.

▪Eliminate all electrical hazards. (In this respect refer to the applicable national

safety regulations and/or regulations issued by the local energy supply

companies.)

▪If shutting down the pump does not increase potential risk, fit an emergency-

stop control device in the immediate vicinity of the pump (set) during pump set

installation.

2.8 Safety information for maintenance, inspection and installation work

▪Modifications or alterations of the pump are only permitted with the

manufacturer's prior consent.

▪Use only original spare parts or parts authorized by the manufacturer. The use of

other parts can invalidate any liability of the manufacturer for resulting damage.

▪The operator ensures that all maintenance, inspection and installation work is

performed by authorized, qualified specialist personnel who are thoroughly

familiar with the manual.

▪Only carry out work on the pump (set) during standstill of the pump.

▪The pump casing must have cooled down to ambient temperature.

▪Pump pressure must have been released and the pump must have been drained.

▪When taking the pump set out of service always adhere to the procedure

described in the manual. (⇨ Section 6.3 Page 29)

▪Decontaminate pumps which handle fluids posing a health hazard.

▪As soon as the work is completed, re-install and/or re-activate any safety-relevant

and protective devices. Before returning the product to service, observe all

instructions on commissioning. (⇨ Section 6.1 Page 27)

2.9 Unauthorized modes of operation

Never operate the pump (set) outside the limits stated in the data sheet and in this

manual.

The warranty relating to the operating reliability and safety of the pump (set)

supplied is only valid if the equipment is used in accordance with its intended use.

2 Safety

Amacan P 9 of 68

3 Transport/Temporary Storage/Disposal

3.1 Transport

DANGER

Improper transport

Danger to life from falling parts!

Damage to the pump set!

▷Attach any lifting tackle to the attachment points (eyebolts) provided.

▷Never suspend the pump set by its power cable.

▷Never use the chains or lifting ropes included in KSB's scope of supply for lifting

loads other than the KSB product supplied.

▷Securely attach the lifting ropes or chains to the pump and crane.

3.1.1 Transporting the delivered pump set to the place of installation

Fig. 1: Transporting the pump set in its original packaging

▪The pump set is supplied in horizontal position in a suitable transport holder.

▪Use suitable lifting equipment to transport the pump set in its original packaging

to its place of installation.

Observe the marked centers of gravity and/or attachment points on the transport

boxes!

For the weight refer to the name plate or data sheet.

3.1.2 Placing the pump set in vertical or horizontal position

WARNING

Pump set tipping over

Risk of squashing hands and feet!

▷Suspend or support the pump set.

CAUTION

Improper storage

Damage to the power cables!

▷Support the power cables at the cable entry to prevent permanent

deformation.

▷Only remove the protective caps from the power cables at the time of

installation.

3 Transport/Temporary Storage/Disposal

10 of 68 Amacan P

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere KSB Wasserpumpe Handbücher

KSB

KSB AmaDrainer 3 Montageanleitung

KSB

KSB Etanorm SYT Montageanleitung

KSB

KSB Filtra N Bedienungsanleitung

KSB

KSB Ixo-Pro Montageanleitung

KSB

KSB Sewabloc Series Montageanleitung

KSB

KSB Ama-Drainer-Box Mini Montageanleitung

KSB

KSB INVCP Bedienungsanleitung

KSB

KSB Magnochem-Bloc Montageanleitung

KSB

KSB Hya-Solo DSV Series Montageanleitung

KSB

KSB Omega Montageanleitung

KSB

KSB Rotex Montageanleitung

KSB

KSB Ama-Drainer N 302 Bedienungsanleitung

KSB

KSB Delta Primo F Bedienungsanleitung

KSB

KSB Sewatec Montageanleitung

KSB

KSB Calio Montageanleitung

KSB

KSB Ama-Drainer-Box Mini Bedienungsanleitung

KSB

KSB EtaLine Pro Series Bedienungsanleitung

KSB

KSB RPH Montageanleitung

KSB

KSB Ama-Drainer 4 Series Montageanleitung

KSB

KSB UPA Montageanleitung

KSB

KSB Amarex KRT Montageanleitung

KSB

KSB INVCP Betriebsanleitung

KSB

KSB UPA Montageanleitung

KSB

KSB Amar-Drainer 303.2 Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

STA-RITE

STA-RITE ST33APP Bedienungsanleitung