KSB Filtra N Bedienungsanleitung

Recirculation Pump for Swimming Pool

Filter Systems

Filtra N

Installation/Operating

Manual

Legal information/Copyright

Installation/Operating Manual Filtra N

Original operating manual

KSB Aktiengesellschaft

processed for any other purpose, nor otherwise transmitted, published or made available to a third party without

KSB's express written consent.

Subject to technical modification without prior notice.

Contents

Glossary .................................................................................................5

1 General ..................................................................................................6

1.1 Principles ...........................................................................................................6

1.2 Symbols .............................................................................................................6

2 Safety .....................................................................................................7

2.1 Key to safety symbols/markings ....................................................................... 7

2.2 General .............................................................................................................. 7

2.3 Intended use .....................................................................................................7

2.4 Personnel qualification and training ............................................................... 8

2.5 Consequences and risks caused by non-compliance with these operating

instructions ........................................................................................................ 8

2.6 Safety awareness ..............................................................................................8

2.7 Safety information for the operator/user ....................................................... 8

2.8 Safety information for maintenance, inspection and installation work ....... 9

2.9 Unauthorised modes of operation .................................................................. 9

3 Transport/Temporary Storage/Disposal .............................................10

3.1 Checking the condition upon delivery .......................................................... 10

3.2 Transport ......................................................................................................... 10

3.3 Storage/Preservation ...................................................................................... 10

3.4 Return to supplier ........................................................................................... 10

3.5 Disposal ...........................................................................................................11

4 Description of the Pump (Set) ............................................................12

4.1 General description ........................................................................................ 12

4.2 Designation ..................................................................................................... 12

4.3 Name plate ...................................................................................................... 12

4.4 Design details .................................................................................................. 12

4.5 Configuration and function ........................................................................... 13

4.6 Noise characteristics .......................................................................................14

4.7 Scope of supply ............................................................................................... 14

5 Installation at Site ...............................................................................15

5.1 Safety regulations ........................................................................................... 15

5.2 Checks to be carried out prior to installation ............................................... 15

5.3 Installing the pump set .................................................................................. 16

5.4 Connecting the piping ...................................................................................16

5.5 Connection to power supply .......................................................................... 17

5.6 Priming and venting the pump .....................................................................18

5.7 Checking the direction of rotation ................................................................ 18

6 Commissioning/Start-up/Shutdown ...................................................19

Contents

Filtra N 3 of 34

6.1 Commissioning/start-up ................................................................................. 19

6.2 Operating limits .............................................................................................. 19

6.3 Shutdown/storage/preservation .................................................................... 20

6.4 Returning to service .......................................................................................20

7 Servicing/Maintenance .......................................................................21

7.1 Safety regulations ........................................................................................... 21

7.2 Servicing/maintenance/inspection ................................................................. 21

7.3 Spare parts stock ............................................................................................. 26

7.4 Drainage/disposal ........................................................................................... 26

8 Trouble-shooting ................................................................................27

9 Related Documents ............................................................................28

9.1 Exploded view and list of components .........................................................28

9.2 Wiring diagram ............................................................................................... 29

10 EC Declaration of Conformity ............................................................30

11 Certificate of Decontamination .........................................................31

Index ....................................................................................................32

Contents

4 of 34 Filtra N

Glossary

Cavitation damage

Material of the pump internals is destroyed by

imploding vapour bubbles.

Certificate of decontamination

A certificate of decontamination is enclosed by

the customer when returning the product to

the manufacturer to certify that the product

has been properly drained to eliminate any

environmental and health hazards arising from

components in contact with the fluid handled.

Hydraulic system

The part of the pump in which the kinetic

energy is converted into pressure energy

Noise characteristics

The noise emission to be expected, indicated as

sound pressure level LpA in dB(A)

Pump

Machine without drive, additional components

or accessories

Pump set

Complete pump set consisting of pump, drive,

additional components and accessories

Self-priming ability

Ability of a filled pump to evacuate a suction

line, i.e. to self-prime from an unfilled suction

line.

Glossary

Filtra N 5 of 34

1 General

1.1 Principles

This operating manual is supplied as an integral part of the type series and variants

indicated on the front cover. The manual describes the proper and safe use of this

equipment in all phases of operation.

The name plate indicates the type series/size and main operating data. The serial/

series number uniquely identify the system and serve as identification in all further

business processes.

In the event of damage, immediately contact your nearest KSB service centre to

maintain the right to claim under warranty.

Noise characteristics(⇨ Section 4.6 Page 14)

1.2 Symbols

Table 1: Symbols used in this manual

Symbol Description

✓Conditions which need to be fulfilled before proceeding with the

step-by-step instructions

⊳Safety instructions

⇨Result of an action

⇨Cross-references

Step-by-step instructions

Note

Recommendations and important information on how to handle

the product

1 General

6 of 34 Filtra N

2 Safety

All the information contained in this section refers to hazardous situations.

2.1 Key to safety symbols/markings

Table 2: Definition of safety symbols/markings

Symbol Description

!DANGER

DANGER

This signal word indicates a high-risk hazard which, if not avoided,

will result in death or serious injury.

!WARNING

WARNING

This signal word indicates a medium-risk hazard which, if not

avoided, could result in death or serious injury.

CAUTION

This signal word indicates a hazard which, if not avoided, could

result in damage to the machine and its functions.

General hazard

In conjunction with one of the signal words this symbol indicates a

hazard which will or could result in death or serious injury.

Electrical hazard

In conjunction with one of the signal words this symbol indicates a

hazard involving electrical voltage and identifies information about

protection against electrical voltage.

Machine damage

In conjunction with the signal word CAUTION this symbol indicates

a hazard for the machine and its functions.

2.2 General

This manual contains general installation, operating and maintenance instructions

that must be observed to ensure safe pump operation and prevent personal injury

and damage to property.

The safety information in all sections of this manual must be complied with.

This manual must be read and completely understood by the specialist personnel/

operators responsible prior to installation and commissioning.

The contents of this manual must be available to the specialist personnel at the site

at all times.

Information attached directly to the pump must always be complied with and be

kept in a perfectly legible condition at all times. This applies to, for example:

▪Arrow indicating the direction of rotation

▪Markings for connections

▪Name plate

The operator is responsible for ensuring compliance with all local regulations not

taken into account in this manual.

2.3 Intended use

The pump (set) must only be operated within the operating limits described in the

other applicable documents.

▪Only operate pumps/pump sets which are in perfect technical condition.

▪Do not operate the pump (set) in partially assembled condition.

▪Only use the pump to handle the fluids described in the data sheet or product

literature of the pump model.

▪Never operate the pump without the fluid handled.

▪Observe the minimum flow rates indicated in the data sheet or product literature

(to prevent overheating, bearing damage, etc).

!DANGER

2 Safety

Filtra N 7 of 34

▪Observe the maximum flow rates indicated in the data sheet or product

literature (to prevent overheating, mechanical seal damage, cavitation damage,

bearing damage, etc).

▪Do not throttle the flow rate on the suction side of the pump (to prevent

cavitation damage).

▪Consult the manufacturer about any use or mode of operation not described in

the data sheet or product literature.

Prevention of foreseeable misuse

▪Never open discharge-side shut-off elements further than permitted.

– The maximum flow rate specified in the data sheet or product literature

would be exceeded.

–Risk of cavitation damage

▪Never exceed the permissible operating limits specified in the data sheet or

product literature regarding pressure, temperature, etc.

▪Observe all safety information and instructions in this manual.

2.4 Personnel qualification and training

All personnel involved must be fully qualified to transport, install, operate, maintain

and inspect the machinery this manual refers to.

The responsibilities, competence and supervision of all personnel involved in

transport, installation, operation, maintenance and inspection must be clearly

defined by the operator.

Deficits in knowledge must be rectified by means of training and instruction

provided by sufficiently trained specialist personnel. If required, the operator can

commission the manufacturer/supplier to train the personnel.

Training on the pump (set) must always be supervised by technical specialist

personnel.

2.5 Consequences and risks caused by non-compliance with these operating

instructions

▪Non-compliance with these operating instructions will lead to forfeiture of

warranty cover and of any and all rights to claims for damages.

▪Non-compliance can, for example, have the following consequences:

– Hazards to persons due to electrical, thermal, mechanical and chemical

effects and explosions

–Failure of important product functions

– Failure of prescribed maintenance and servicing practices

– Hazard to the environment due to leakage of hazardous substances

2.6 Safety awareness

In addition to the safety information contained in this manual and the intended use,

the following safety regulations shall be complied with:

▪Accident prevention, health and safety regulations

▪Explosion protection regulations

▪Safety regulations for handling hazardous substances

▪Applicable standards and laws

2.7 Safety information for the operator/user

▪Fit contact guards supplied by the operator for hot, cold or moving parts, and

check that the guards function properly.

▪Do not remove any contact guards during operation.

2 Safety

8 of 34 Filtra N

▪Provide the personnel with protective equipment and make sure it is used.

▪Contain leakages (e.g. at the shaft seal) of hazardous fluids handled (e.g.

explosive, toxic, hot) so as to avoid any danger to persons and the environment.

Adhere to all relevant laws.

▪Eliminate all electrical hazards. (In this respect refer to the applicable national

safety regulations and/or regulations issued by the local energy supply

companies.)

▪If shutting down the pump does not increase potential risk, fit an emergency-

stop control device in the immediate vicinity of the pump (set) during pump set

installation.

▪Make sure the system cannot be accessed by unauthorised persons (e.g. children).

2.8 Safety information for maintenance, inspection and installation work

▪Modifications or alterations of the pump are only permitted with the

manufacturer's prior consent.

▪Use only original spare parts or parts authorised by the manufacturer. The use of

other parts can invalidate any liability of the manufacturer for resulting damage.

▪The operator ensures that all maintenance, inspection and installation work is

performed by authorised, qualified specialist personnel who are thoroughly

familiar with the manual.

▪Only carry out work on the pump (set) during standstill of the pump.

▪The pump casing must have cooled down to ambient temperature.

▪Pump pressure must have been released and the pump must have been drained.

▪When taking the pump set out of service always adhere to the procedure

described in the manual.

▪Decontaminate pumps which handle fluids posing a health hazard.

▪As soon as the work is completed, re-install and/or re-activate any safety-relevant

and protective devices. Before returning the product to service, observe all

instructions on commissioning.(⇨ Section 6.1 Page 19)

2.9 Unauthorised modes of operation

Never operate the pump (set) outside the limits stated in the data sheet and in this

manual.

The warranty relating to the operating reliability and safety of the supplied pump

(set) is only valid if the equipment is used in accordance with its intended use.(⇨

Section 2.3 Page 7)

2 Safety

Filtra N 9 of 34

3 Transport/Temporary Storage/Disposal

3.1 Checking the condition upon delivery

1. On transfer of goods, check each packaging unit for damage.

2. In the event of in-transit damage, assess the exact damage, document it and

notify KSB or the supplying dealer (as applicable) and the insurer about the

damage in writing immediately.

3.2 Transport

CAUTION

Improper pump transport

Damage to the pump!

▷Never suspend the pump/pump set from the power cable.

▷Prevent the pump (set) from getting knocked or dropped.

3.3 Storage/Preservation

CAUTION

Damage during storage by frost, humidity, dirt, UV radiation or vermin

Corrosion/contamination of the pump!

▷Store the pump (set) in a dry, dark, frost-proof room not exposed to sunlight

where the atmospheric humidity is as constant as possible.

Store the pump (set) in a dry, dark, frost-proof room not exposed to sunlight. Under

these conditions it does not need additional preservation.

3.4 Return to supplier

1. Drain the pump as per operating instructions.(⇨ Section 7.4 Page 26)

2. Always flush and clean the pump, particularly if it has been used for handling

noxious, explosive, hot or other hazardous fluids.

3. If the fluids handled by the pump set leave residues which might lead to

corrosion damage when coming into contact with atmospheric humidity, or

which might ignite when coming into contact with oxygen, the pump set must

also be neutralised, and anhydrous inert gas must be blown through the pump

for drying purposes.

4. Always complete and enclose a certificate of decontamination when returning

the pump (set).

Always indicate any safety and decontamination measures taken.(⇨ Section 11

Page 31)

NOTE

If required, a blank certificate of decontamination can be downloaded from the

KSB web site at: www.ksb.com/certificate_of_decontamination

3 Transport/Temporary Storage/Disposal

10 of 34 Filtra N

Andere Handbücher für Filtra N

Inhaltsverzeichnis

Andere KSB Wasserpumpe Handbücher

KSB

KSB Sewabloc Series Montageanleitung

KSB

KSB Calio SI Series Montageanleitung

KSB

KSB CPKO Bedienungsanleitung

KSB

KSB S 100D Installations- und Betriebshandbuch

KSB

KSB Delta Primo Series Bedienungsanleitung

KSB

KSB Delta Primo F Bedienungsanleitung

KSB

KSB Calio S BMS Montageanleitung

KSB

KSB Sewatec Series Bedienungsanleitung

KSB

KSB Calio-Therm NC Montageanleitung

KSB

KSB Megabloc Montageanleitung

KSB

KSB RPH Montageanleitung

KSB

KSB INVCP Betriebsanleitung

KSB

KSB Amarex KRT Montageanleitung

KSB

KSB Evamatic-Box N 200 l Montageanleitung

KSB

KSB Amacan S Series Bedienungsanleitung

KSB

KSB AmaSlide Series Montageanleitung

KSB

KSB Etachrom NC Montageanleitung

KSB

KSB Evamatic-Box N Series Montageanleitung

KSB

KSB Comeo Series Montageanleitung

KSB

KSB moviBOOST VP Bedienungsanleitung

KSB

KSB Emporia MB Montageanleitung

KSB

KSB Ama-Porter Bedienungsanleitung

KSB

KSB RDLO Series Bedienungsanleitung

KSB

KSB Rotex 10 Series Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

STA-RITE

STA-RITE ST33APP Bedienungsanleitung