KTM 350 SX-F EU 2011 Handbuch

SETUP INSTRUCTIONS 2011

350 SX‑F EU

350 SX‑F USA

350 XC‑F USA

Art. no. 3211680en

INTRODUCTION 1

INTRODUCTION

The work described in these setup instructions must be performed before the vehicle is delivered to the customer.

Read the setup instructions in their entirety before beginning work.

Print out the current PDI form found on the KTM DEALER.NET.

These setup instructions were written to correspond to the latest state of this series. We reserve the right to make changes in the inter-

est of technical advancement without at the same time updating this manual.

We shall not provide a description of general workshop methods. Likewise, safety rules that apply in a workshop are not specified here.

It is assumed that the work will be performed by a fully trained mechanic.

All specifications are non-binding. KTM Sportmotorcycle AG in particular reserves the right to modify or delete technical specifica-

tions, prices, colors, forms, materials, services, designs, equipment, etc., without prior notice and without specifying reasons, to adapt

these to local conditions, as well as to stop production of a particular model without prior notice. KTM accepts no liability for delivery

options, deviations from illustrations and descriptions, as well as misprints and other errors. The models portrayed partly contain spe-

cial equipment that does not belong to the regular scope of delivery.

Reproduction, even in part, as well as copying of all kinds, is permitted only with the express written permission of the copyright

owner.

ISO 9001(12 100 6061)

According to the international quality management standard ISO 9001, KTM uses quality assurance processes that lead

to the maximum possible quality of the products.

Issued by: TÜV Management Service

KTM-Sportmotorcycle AG

5230 Mattighofen, Austria

MEANS OF REPRESENTATION 2

Symbols used

The symbols used are explained in the following.

Identifies an expected reaction (e.g. to a work step or a function).

Identifies an unexpected reaction (e.g. to a work step or a function).

Identifies a page reference (more information is provided on the specified page).

Indicates information with more details or tips.

Indicates the result of a testing step.

Identifies a voltage measurement.

Identifies a current measurement.

Identifies a resistance measurement.

Formats used

The typographical and other formats used are explained below.

Specific name Identifies a proprietary name.

Name®Identifies a protected name.

Brand™ Identifies a brand available on the open market.

SET‑UP 3

2.1Unpacking and setting up the vehicle

B00531-01

Packaging 2

–Remove the box and the plastic packaging.

Info

To avoid damaging the motorcycle during the setup, leave the protective

film on the vehicle until you have finished.

–Remove the separate enclosure and unpack it. Check that the scope of delivery

is complete on the basis of the enclosed packing list.

–Have a lift stand available.

Lift stand (54829055000)

–Carefully loosen and remove the tensioning belt over the link fork.

Info

An assistant prevents the motorcycle from falling over.

–Carefully loosen and remove the tensioning belts around the lower triple clamp.

The vehicle is released at the front.

–Together with an assistant, take the vehicle off of the palette.

–Position the vehicle on a lift stand.

–Check the vehicle for transport damage.

B00532-01

Package 12

–Remove the box and the plastic packaging.

Info

An assistant prevents the motorcycle from falling over.

To avoid damaging the motorcycle during the setup, leave the protective

film on the vehicle until you have finished.

–Remove the separate enclosure and unpack it. Check that the scope of delivery

is complete on the basis of the enclosed packing list.

B00533-01

–Have a lift stand available.

Lift stand (54829055000)

–Together with an assistant, take the vehicle off of the palette.

–Position the vehicle on a lift stand.

–Check the vehicle for transport damage.

101014-10

–Remove the cardboard from around the shock absorber.

–Position the angle lever and linkage lever.

–Mount and tighten screw cap .

Guideline

Nut, linkage lever to angle lever M14x1.5 80 Nm (59 lbf ft)

–Mount and tighten screw .

Guideline

Screw, bottom shock

absorber

M10 60 Nm

(44.3 lbf ft)

Loctite®243™

SET‑UP 4

B00534-10

–Position FI warning lamp with holder . Mount and tighten the screw.

Guideline

Remaining screws, chassis M6 10 Nm

(7.4 lbf ft)

–Plug connector into the wiring harness.

–Mount cable holder on the frame.

B00535-10

–Route the clutch line with the clutch master cylinder toward the front between

the upper and lower triple clamps.

–Position the fork legs and tighten the screws of the triple clamp.

Guideline

Screw, top triple clamp M8 17 Nm

(12.5 lbf ft)

Screw, bottom triple clamp M8 12 Nm

(8.9 lbf ft)

Info

The upper milled groove in the fork leg must be flush with the top edge

of the upper triple clamp.

Position bleeder screws toward the front.

B00375-11

–Remove screws . Remove the handlebar clamp.

–Remove screws . Remove the handlebar support.

–Place the handlebar support in the required position. Mount and tighten screws .

Guideline

Screw, handlebar support M10 40 Nm

(29.5 lbf ft)

Loctite®243™

Info

Position the left and right handlebar supports evenly.

101020-10

–Position the handlebar.

Info

Make sure cables and wiring are positioned correctly.

–Position the handlebar clamps. Mount and tighten the screws.

Guideline

Screw, handlebar clamp M8 20 Nm

(14.8 lbf ft)

Info

The markings on the handlebar should be at the center of the handlebar

clamps.

Keep the gap widths equal when tightening.

101017-01

–Position the controls on the right half of the handlebar.

Info

The routing of the cables can be seen in the figure.

SET‑UP 5

101018-01

–Position the controls on the left half of the handlebar.

Info

The figure shows how to route the clutch line and wiring harness.

–Install the front fender. ( p. 6)

–Install the front wheel. ( p. 6)

–Correctly mount the fuel tank breather.

B00539-01

–Secure the handlebar cushion with two cable binders.

–Install the start number plate. ( p. 6)

101019-01

–Mount the footrests with the springs and bolts. Secure the bolts using the washers

and pins.

Plier for footrest spring (58429083000)

800035-10

Warning

Risk of injury Battery acid and battery gases cause serious cauterization.

–Keep batteries out of the reach of children.

–Wear suitable protective clothing and goggles.

–Avoid contact with battery acid and battery gases.

–Keep the battery away from sparks or open fire. Charge only in well ven-

tilated rooms.

–Flush with copious amounts of water in case of skin contact. If battery

acid comes into contact with the eyes, flush the eyes with water for at

least 15 minutes and consult a physician.

–Fill the battery.

Info

Read the notes in the battery package.

–Charge the battery. ( p. 7)

–Install the battery. ( p. 7)

–Unpack and mount the KTM PowerParts included in the delivery (optional).

Info

Read the accompanying KTM PowerParts installation instructions.

–Apply the label included in the delivery (optional).

–Refuel. ( p. 9)

–Position all controls exactly on the handlebar. Tighten all screws.

–Print out the current PDI form found on KTM DEALER.NET and perform the delivery

inspection.

WORK 6

3.1Installing the front wheel

Warning

Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.

–Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.

B00304-11

–Check the wheel bearing for damage and wear.

» If the wheel bearing is damaged or worn:

–Change the wheel bearing.

–Clean and grease the shaft seal rings and contact surface of the spacers.

Long-life grease ( p. 12)

–Insert the spacers.

B00302-11

–Lift the front wheel into the fork, position it, and insert the wheel spindle.

–Mount and tighten screw .

Guideline

Screw, front wheel spindle M24x1.5 45 Nm

(33.2 lbf ft)

–Activate the hand brake lever multiple times until the brake linings are in contact

with the brake disc.

–Remove the motorcycle from the lift stand.

–Pull the front brake and compress the fork powerfully a few times.

The fork legs straighten.

–Tighten screws .

Guideline

Screw, fork stub M8 15 Nm

(11.1 lbf ft)

3.2Installing the front fender

B00307-10

–Ensure that the spacers are mounted in the fender.

–Position the front fender. Mount and tighten screws .

Guideline

Remaining screws, chassis M6 10 Nm (7.4 lbf ft)

Info

Make sure the holding lugs engage in the start number plate.

3.3Installing the start number plate

B00308-11

–Position the start number plate. Mount and tighten screw .

Guideline

Remaining screws, chassis M6 10 Nm (7.4 lbf ft)

Info

Make sure that the holding lugs engage in the fender.

–Position the brake line and clamp. Mount and tighten screw .

WORK 7

3.4Removing the seat

B00317-10

–Remove screw .

–Lift up the seat at the rear, pull it back and then remove it from above.

3.5Mounting the seat

B00318-01

–Hook in the front of the seat at the collar bushing of the fuel tank, lower it at the

rear and simultaneously it push forward.

–Make sure that the seat is correctly locked in.

–Mount and tighten the screw of the seat fixing.

Guideline

Remaining screws, chassis M6 10 Nm (7.4 lbf ft)

3.6Installing the battery

B00361-11

–Place the battery in the battery holder.

Battery (YTX4L-BS)

–Reconnect rubber band .

–Attach the positive cable and replace the positive terminal cover .

–Attach negative cable .

–Mount the seat. ( p. 7)

3.7Charging the battery

Warning

Risk of injury Battery acid and battery gases cause serious cauterization.

–Keep batteries out of the reach of children.

–Wear suitable protective clothing and goggles.

–Avoid contact with battery acid and battery gases.

–Keep the battery away from sparks or open fire. Charge only in well ventilated rooms.

–Flush with copious amounts of water in case of skin contact. If battery acid comes into contact with the eyes, flush the

eyes with water for at least 15 minutes and consult a physician.

Warning

Environmental hazard Battery parts and acid are harmful to the environment.

–Do not discard batteries with the household trash. Dispose of a defective battery in an environmentally compatible manner.

Give the battery to your KTM dealer or to a recycling center that accepts used batteries.

Warning

Environmental hazard Hazardous substances cause environmental damage.

–Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.

WORK 8

Info

Even when there is no load on the battery, it still loses power steadily.

The charge state and the type of charge are very important for the service life of the battery.

Rapid recharging with a high charging current shortens the battery's service life.

If the charging current, charging voltage and charging time are exceeded, electrolyte escapes through the safety valves. This

reduces the battery capacity.

If the battery is depleted from starting the vehicle repeatedly, the battery must be charged immediately.

If the battery is left in a discharged state for an extended period, it will become over-discharged and sulfate, destroying the

battery.

The battery is maintenance-free, which means that the acid level does not need to be checked.

–Switch off all power consumers and switch off the engine.

–Remove the seat. ( p. 7)

–Disconnect the negative cable of the battery to avoid damage to the onboard elec-

tronics.

400240-10

–Connect the battery charger to the battery. Switch on the battery charger.

Battery charger (58429074000)

You can also use the battery charger to test the open-circuit voltage and starting

voltage of the battery, and to test the alternator. With this device, you cannot over-

charge the battery.

Info

Never remove lid .

Charge the battery with a maximum of 10% of the capacity specified on the

battery housing .

–Switch off the battery charger after charging. Disconnect the battery.

Guideline

The charge current, charge voltage and charge time must not be exceeded.

Charge the battery regularly when the

motorcycle is not in use

3 months

–Mount the seat. ( p. 7)

3.8Opening the filler cap

B00277-10

–Press release button , turn the filler cap counterclockwise and lift it free.

3.9Closing the filler cap

B00278-10

–Replace the filler cap and turn clockwise until the release button locks in place.

Info

Run the fuel tank breather hose without kinks.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere KTM Motorrad Handbücher

KTM

KTM 250 EXC-F 2013 Bedienungsanleitung

KTM

KTM 125 EXC EU 2011 Handbuch

KTM

KTM 390 Duke 2015 COL Handbuch

KTM

KTM 1190 RC8 R EU/UK 2009 Betriebsanleitung

KTM

KTM 125 EXC Bedienungsanleitung

KTM

KTM 250 SX 2010 Bedienungsanleitung

KTM

KTM 450 SX-F EU Bedienungsanleitung

KTM

KTM 60 SX 1999 Benutzerhandbuch

KTM

KTM 2009 690 Rally Factory Replica Bedienungsanleitung

KTM

KTM 1290 Super Duke R AU 2015 Bedienungsanleitung

KTM

KTM 1290 Super Duke R EU 2014 Betriebsanleitung

KTM

KTM Freeride E-SX 2015 Handbuch

KTM

KTM 450 EXC-F 2017 Betriebsanleitung

KTM

KTM 250 EXC-F EU 2010 Bedienungsanleitung

KTM

KTM 125 EXE 2001 Benutzerhandbuch

KTM

KTM 350 SX-F Cairoli replica Bedienungsanleitung

KTM

KTM 2011 990 Supermoto T USA Bedienungsanleitung

KTM

KTM 85 SX 2019 Bedienungsanleitung

KTM

KTM 150 SX 2021 Handbuch

KTM

KTM 1190 Adventure R EU Bedienungsanleitung

KTM

KTM 65 SX 1999 Bedienungsanleitung

KTM

KTM 625 SXC Leitfaden

KTM

KTM 85 SX 2018 Handbuch

KTM

KTM 790 Adventure R 2019 Betriebsanleitung

Beliebte Motorrad Handbücher anderer Marken

OHVALE

OHVALE GP-0 Stücklistenhandbuch

Yamaha

Yamaha Star XV19CTSZ 2009 Bedienungsanleitung

HYOSUNG

HYOSUNG ST7 Bedienungsanleitung

Husqvarna

Husqvarna FC 250 2016 Bedienungsanleitung

Ducati

Ducati SCRAMBLER 800 Gebrauchsanweisung

APRILIA

APRILIA ETV MILLE CAPONORD - PART1 02-2001 Bedienungsanleitung

Yamaha

Yamaha 2006 YZF-R1V Bedienungsanleitung

Fantic

Fantic Enduro 125 Bedienungsanleitung

Ducati

Ducati Supersport 750 desmodue Bedienungsanleitung

MV Agusta

MV Agusta 2008 F4 312RR 1078 Gebrauchsanweisung

Yamaha

Yamaha XVS650A Bedienungsanleitung

Yamaha

Yamaha YZF-R6T(C) Handbuch

Ducati

Ducati 748 monoposto strada Bedienungsanleitung

ATK

ATK 1988 250 Bedienungsanleitung

Excelsior-HENDERSON

Excelsior-HENDERSON 1999 HCX Bedienungsanleitung

Triumph

Triumph Thunderbird Bedienungsanleitung

Yamaha

Yamaha 2006 FJR1300A Bedienungsanleitung

Ducati

Ducati 996 Bedienungsanleitung