DATAFLEX®is a maintenance-free torque measuring shaft with integrated speed measurement.
Combined with the steel lamina coupling RADEX®-N the complete system forms a torsionally stiff,
double-cardanic coupling with integrated measuring shaft.
1Technical data 3
2Advice 5
2.1 General advice 5
2.2 Safety and advice symbols 5
2.3 General hazard warnings 5
2.4Intended use 6
3Storage, transport and packaging 6
3.1 Storage 6
3.2 Transport and packaging 6
4Assembly 7
4.1 Components of DATAFLEX®torque measuring shaft 7
4.2 Advice for finish bore 8
4.3 Displacements - alignment of the torque measuring shaft 8
4.4 Assembly of the hubs 9
4.5 Assembly of the RADEX®-N clamping ring hubs on the DATAFLEX®torque measuring
shaft 9
4.6 Assembly of hubs on the driving and driven side 10
4.7 Assembly of the lamina sets, RADEX®-N size 135 11
4.8 Assembly of the lamina sets, RADEX®-N size 156 11
4.9 Tightening torques of screw connections on the lamina set 12
4.10 Advice for assembly of the DATAFLEX®torque measuring shaft 13
4.11 Technical description 13
5Disposal 21
6Maintenance and service 21
7Services, customer service addresses 21
8EC Certificate of conformity 22
