Kubota ROPS Cab F 80 Series Bedienungsanleitung

Kubota Fx80 Series ROPS Cab

** Shown with optional equipment

Kubota Fx80 Series ROPS Cab

This ROPS cab is designed and built to fit the Kubota F2880, F3080, and F3680.

Designed and Built by:

Tektite Manufacturing Inc:

427 Buffalo Street

P.O. Box 639

Winkler, MB

R6W 4A8

Canada

PH: 204-331-3463

Fax: 204-331-4159

[email protected]

www.tektite.ca

One year standard product warranty provided by Tektite.

June 2021© Kubota Fx80 Series ROPS Cab Installation Manual

DO NOT PROCEED FURTHER UNTIL YOU HAVE READ THE INFORMATION BELOW

1) Always wear personal protective equipment

2) A minimum of two people is necessary to safely install the cab

3) This ROPS cab is heavy. A lift assist device such as an overhead

hoist or high lift forklift is required.

4) Ensure your work area is well ventilated. The installation

requires the starting of the tractor which will produce

dangerous carbon monoxide fumes.

5) Read through the entire installation manual first.

6) Follow the installation instructions in order.

7) Reading the operators manual prior to using the ROPS cab.

Tektite Manufacturing Incorporated thanks you for purchasing a Kubota Fx80 series ROPS cab!

Tektite has worked very hard to design and build this ROPS product and we hope that it

provides you with many years of ROPS protection.

Tektite’s ROPS products are designed to provide safe and dependable service during operation

when they are properly maintained according to the instructions. Please read this installation

manual carefully before installing and using this ROPS product.

The photos/illustrations provided in this manual may not provide all the detail needed, and are

for reference only.

All directions provided are from the reference point of the tractor seat facing the steering

wheel. All left and right references are from this view point.

For reference, please fill in the information below. This will assist your dealer in providing

service for this ROPS. It is advisable that this information be provided to your insurance

company as well in the event that the tractor is lost or damaged.

Vehicle Model: _________________________________________________________

ROPS Serial Number: ___________________________________________________

Date of Purchase: _______________________________________________________

Dealer Name: ___________________________________________________________

June 2021© Kubota Fx80 Series ROPS Cab Installation Manual

Parts List Standard Cab:

Description

Qty

Bolt, Flange, ½” x 1 ½”, Gr. 8, Yellow

Nut, Flange, Serrated, ½”, Gr. 8, Yellow

Under seat upholstery

Floor mat, operator platform

L&R

Push button fasteners

Bolt, Hex, ½” x 4 1/2”, Gr. 8

Cab Lift Brackets

Weather-stripping, 180° (pre-installed on cab)

19 LF

Weather-stripping, 180°

7”

Weather-stripping, 180°

5 5/8”

Weather-stripping, 180°

6 ¼”

Weather-stripping, 180°

3”

Weather-stripping, 180°

8 ½”

Weather-stripping, 180°

Two –4 ½”

Weather-stripping, 180°

Two –3 ½”

Weather-stripping, 180°

Two –4”

Floormat, 3" x 5"

Wire Loop, 1/4”, Yellow

Zip Ties, Standard

Parts List Optional Components:

Heater

Description

Qty

Elbow fitting, 3/8NPT x 3/8” barb (with A/C option only)

Straight fitting, 3/8NPT x 3/8” barb (with heater option only)

1/2”ID heater hose (3” long)

1/2” to 3/8” reducer

HS-10 hose clamps

HS-6 hose clamps

3/8” ID heater hose

25’ Long

June 2021© Kubota Fx80 Series ROPS Cab Installation Manual

Air Conditioning

Description

Qty

Bolt, Flange, 3/8” x 1 ½”, Gr. 8, Yellow

Nut, Flange, Serrated, 3/8”, Gr. 8, Yellow

Bolt, Hex, 3/8” x 2”, Gr. 8, Yellow

Bolt, Hex, 3/8” x 3 ½”, Gr. 8, Yellow

5/16” x 23” V-belt (25-7228)

7/16” x 42 5/8”V-belt (25-7420)

Nut, Flange, ¼”

Bolt, Flange, ¼” x ½”

Overflow Bottle Mount

Compressor Mount Bracket

Compressor Stabilizer Bracket

Alternator Stiffener Bracket

Bullet Connector, Female

Compressor, Top Port

Wire, 10GA, Red

Wire, 16GA, White

Wire, 16GA, Orange

Shrinkwrap for wire, 1" long

June 2021© Kubota Fx80 Series ROPS Cab Installation Manual

Installation Instructions:

1. Remove two-post ROPS from machine. Save fasteners to re-use later. Remove the tractor

seat.

2. Remove the left and right floor skid pads at the front of the operator platform.

3. On the left side, centre punch and drill out the two fasteners that are there to a ½” diameter

hole. These will be the front left bracket mounting holes.

3a. Remove the two bolts shown below in the photo on both the left and right side.

June 2021© Kubota Fx80 Series ROPS Cab Installation Manual

October 2019©

Kubota Fx80 Series ROPS Cab Installation Manual

4. On the right side, centre punch and drill out the two fasteners that are there to a ½”

diameter hole. These will be the front right bracket mounting holes.

5. Take the 3” piece of 180°weather stripping for the brake lock pedal. Slide the o-rubber onto

the outside edge of sheet metal in the slot. This will provide a better seal for this pedal.

June 2021© Kubota Fx80 Series ROPS Cab Installation Manual

6. Take the 6 ¼” piece of 180° weather stripping for the differential lock pedal. Slide the o-

rubber onto the inside edge of sheet metal in the slot. This will provide a better seal for this

pedal.

7. On the right side of the machine, remove the handle end caps on all of the controls. Then

remove the plastic black shroud around the controls.

Use the next photo as reference for the next five weather stripping installs.

8. For the front left slot, take the 7” and 5 5/8” pieces of 180° weather stripping. Place the 7”

piece on the left side of the slot and the 5 5/8” piece on the right side of the slot.

9. For the front middle slot, take the 8 ½” piece of 180° weather stripping. Slide the bulb onto

the left side of the sheet metal.

June 2021© Kubota Fx80 Series ROPS Cab Installation Manual

10 For the front right slot, take the two 4 ½” pieces of 180° weather stripping. Slide the o-

rubber onto each side of the slot.

11. For the rear left slot, take the two 3 ½” pieces of 180° weather stripping. Slide the o-rubber

pieces onto each side of the slot.

12. For the rear right slot, take the two 4” pieces of 180° weather stripping. Slide the o-rubber

pieces onto each side of the slot.

13. Re-install the black plastic shroud.

14. Take the platform upholstery install onto the platform. Using high strength aerosol glue,

fasten into place, 3M High Strength 90 is recommended.

15. Remove the left and right cab doors. To remove the gas shock on the left cab door, slide a

flat screwdriver underneath the small clip on the end cap that must be pulled UP order to pop

the shock off of the ball stud. The shock will release very easily when this is accomplished. Lift

the door assembly straight up and off of the cab and put aside for now.. Install the lift brackets

through the ½” x 4 1/2” hex bolts into the lift weld nuts that are located at the top and rear of

the door openings.

June 2021© Kubota Fx80 Series ROPS Cab Installation Manual

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kubota Landwirtschaftliche Geräte Handbücher

Kubota

Kubota DMC 8028 Bedienungsanleitung

Kubota

Kubota LD1607 Bedienungsanleitung

Kubota

Kubota B2791A Produkthandbuch

Kubota

Kubota LA1154 Bedienungsanleitung

Kubota

Kubota AP-CB3574 Bedienungsanleitung

Kubota

Kubota BH92 Bedienungsanleitung

Kubota

Kubota VC5046 Bedienungsanleitung

Kubota

Kubota AP-STP15 Bedienungsanleitung

Kubota

Kubota AP-CB2568 Bedienungsanleitung

Kubota

Kubota AP-TC2536 Bedienungsanleitung

Kubota

Kubota RA1042T Bedienungsanleitung

Kubota

Kubota B2778 Produkthandbuch

Kubota

Kubota RA2072 Hydro Bedienungsanleitung

Kubota

Kubota RA2584 Bedienungsanleitung

Kubota

Kubota K6056-8200-0 Bedienungsanleitung

Kubota

Kubota TE4052T Bedienungsanleitung

Kubota

Kubota K-Hitch AP-KH15 Bedienungsanleitung

Kubota

Kubota ,RCK60B-23BX Bedienungsanleitung

Kubota

Kubota WSM BX23S Gebrauchsanweisung

Kubota

Kubota AP-SA35 Bedienungsanleitung

Kubota

Kubota AP-SGM1566 Bedienungsanleitung

Kubota

Kubota AP-SRF2772 Bedienungsanleitung

Kubota

Kubota AP-SC2560 Bedienungsanleitung

Kubota

Kubota AP-SGR1566 Bedienungsanleitung

Beliebte Landwirtschaftliche Geräte Handbücher anderer Marken

GSi

GSi PNEG-2314 Bedienungsanleitung

Checchi & Magli

Checchi & Magli TEXDRIVE Bedienungsanleitung

Amazone

Amazone Cenius 4003-2TX Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Bedienungsanleitung

Cima

Cima BLITZ Bedienungs- und Wartungsanleitung

Amazone

Amazone CombiDisc 3000 Montageanleitung

HE-VA

HE-VA Disc-Roller XL Contour Bedienungsanleitung

AGT

AGT AGT-SSFM Bedienungsanleitung

Milestone

Milestone 72-84 Bedienungsanleitung

KUHN

KUHN Hector 3000 Bedienungsanleitung

Krone

Krone X-Disc 6200 Bedienungsanleitung

Eliet

Eliet DZC450 Bedienungsanleitung

Taarup

Taarup BIO+ B4000 Bedienungsanleitung

Garland

Garland SHAKER 310 DPG Bedienungsanleitung

stable comfort

stable comfort StableWall System Bedienungsanleitung

Raven

Raven AccuBoom Bedienungsanleitung

International

International 710 Bedienungsanleitung

Ashland

Ashland HDW-3217-14 Bedienungsanleitung