KUHN GF7001 T Bedienungsanleitung

OPERATOR'S MANUAL

Gyrotedder

GF7001 T

KN097BGB A

- English - 11-2005

Dear Owner

Gyrotedder

GF7001 T

$DEAR OWNER

In buying a Kuhn machine you have chosen wisely. Into it have gone years of thought, research and

improvements. You will find, as have thousands of owners all over the world, that you have the best that

engineering skill and actual field testing can produce. You have purchased a dependable machine, but only by

proper care and operation can you expect to receive the performance and long service built into it.

This manual contains all the necessary information for you to receive full efficiency from your machine. The

performance you get from this machine is largely dependent on how well you read and understand this manual

and apply this knowledge. Please DO NOT ASSUME YOU KNOW HOW TO OPERATE AND MAINTAIN YOUR

MACHINE before reading this manual carefully. KEEP THIS MANUAL AVAILABLE FOR REFERENCE. Pass

it on to the next owner if you re-sell the machine.

Your KUHN dealer can offer a complete line of genuine KUHN service parts. These parts are manufactured and

carefully inspected in the same factory that builds the machine to assure high quality and accurate fitting of any

necessary replacements.

About improvements

We are continually striving to improve our products. It therefore reserves the right to make improvements or

changes when it becomes practical to do so, without incurring any obligations to make changes or additions to

the equipment sold previously.

Designated use of the machine

The GF7001 T gyrotedder must only be used for the purpose for which it was manufactured: spreading and

tedding previously cut forage or straw. It can also be used to form small windrows in order to limit the exposure

of crop to dew at night.

Gyrotedder

GF7001 T

Contents

$CONTENTS

Dear Owner..................................................................................................................... 1

Contents ......................................................................................................................... 2

Identification of the machine ........................................................................................ 4

Front view (transport position)....................................................................................................... 4

Rear view (working position) .......................................................................................................... 4

Model identification plate................................................................................................................ 5

Optional equipments ....................................................................................................................... 5

Safety .............................................................................................................................. 6

Description of symbols used in this document ............................................................................ 6

Safety instructions........................................................................................................................... 7

Location and description of safety decals on the machine....................................................... 15

Road safety equipment and recommendations .......................................................................... 17

Machine specifications................................................................................................ 18

Description and glossary .............................................................................................................. 18

Technical specifications................................................................................................................ 19

Sound levels................................................................................................................................... 19

Putting into service...................................................................................................... 20

Description of control elements ................................................................................................... 20

Coupling and uncoupling.............................................................................................................. 20

Instructions for transport............................................................................................ 24

Putting the machine into transport position ............................................................................... 24

Conformity with the road regulations .......................................................................................... 26

Contents

Gyrotedder

GF7001 T

Instructions for work....................................................................................................27

Putting the machine into work position ...................................................................................... 27

Adjustments in working position .................................................................................................29

Machine use ................................................................................................................................... 31

Optional equipments....................................................................................................32

DUPLEX gearbox ........................................................................................................................... 32

Lighting and signalling ................................................................................................................. 34

Tine arm deflectors........................................................................................................................ 34

Safety strap .................................................................................................................................... 34

Safety chain.................................................................................................................................... 34

Maintenance and storage ............................................................................................35

Frequency chart............................................................................................................................. 35

Lubrication ..................................................................................................................................... 36

Maintenance................................................................................................................................... 39

Storage ........................................................................................................................................... 41

Limited warranty...........................................................................................................42

Gyrotedder

GF7001 T

Identification of the machine

$IDENTIFICATION OF THE MACHINE

1. Front view (transport position)

2. Rear view (working position)

Identification of the machine

Gyrotedder

GF7001 T

3. Model identification plate

Please write below the type and serial number of the

machine. This information is to be indicated to the dealer

for all spare parts orders.

Type: GF7001 T

No:

4. Optional equipments

 Part no. 1126060: DUPLEX gearbox.

 Part no. 1126120: Lighting and signalling.

 Part no. 1126180: Tine arm deflectors.

 Part no. 58599920: Safety strap.

Gyrotedder

GF7001 T

Safety

$SAFETY

1. Description of symbols used in this

document

This symbol indicates a potentially hazardous situation

that if not avoided, could result in serious bodily injury.

This symbol is used to identify special instructions or

procedures which, if not followed strictly, could result in

machinery damage.

This symbol is used to communicate technical

information of particular interest.

Safety

Gyrotedder

GF7001 T

2. Safety instructions

Read and follow the safety instructions

Before using the machine, carefully read all the safety

instructions in this manual and the warnings placed on

the machine.

Before starting work, the operator must be familiar with

all machine controls, handling devices and their

functions. It is too late to learn once work has been

started!

Never let anyone operate the machine who is not trained

to do so.

Should you have any difficulties in understanding certain

parts in this manual, please contact your KUHN dealer.

Precautions to be taken before carrying out

any operations on the machine

Before leaving the tractor or before adjusting,

maintaining or repairing the machine, disengage the

PTO drive, turn off the engine, remove ignition key and

wait until all moving parts have come to a complete stop.

Introduction

The machine must only be operated, maintained and repaired by competent persons who are familiar with

machine specifications and operation and aware of safety regulations for preventing accidents.

The operator must imperatively respect safety instructions in this manual and in the warnings posted on the

machine. The operator is also obliged to respect current legislation concerning accident prevention, work safety

and public traffic circulation.

Designated use of the machine also means following operation, maintenance and repair recommendations

given by the manufacturer, and using only genuine spare parts, equipment and accessories, as recommended

by the manufacturer.

The manufacturer is not held liable for any damage resulting from machine applications other than those

specified by the manufacturer. Any use other than the designated operation is at the risk and responsibility of

the operator.

The manufacturer is not held liable for any damage or accidents resulting from machine modifications carried

out by the operator himself or by a third party without previous written agreement from the manufacturer.

Gyrotedder

GF7001 T

Safety

Precautions to take before using the

machine

Do not wear loose clothing which could become caught

up in moving parts.

Wear the appropriate protective clothing for the work in

hand (gloves, shoes, goggles, helmet, ear-protectors,

etc.).

Make sure that all operating controls (ropes, cables,

rods, etc) are placed so that they cannot be set off

accidentally, risking accident or damage.

Before operating the machine, check tightness of nuts

and bolts, particularly on fixing elements (tines, forks,

blades, knives, etc). Retighten if necessary.

Before operating the machine, ensure that all the safety

guards are firmly in place and in good condition.

Immediately replace any worn or damaged guard.

Precautions when driving

Precision steering, tractor adherence, road holding and

efficient braking are influenced by the type of implement,

weight, ballast of front axle, ground or road conditions. It

is therefore of the utmost importance to be cautious in

every given situation.

Groundspeed must be adapted to ground conditions as

well as to roads and paths. Always avoid abrupt changes

of direction.

Be particularly cautious when turning corners, paying

attention to machine overhang, length, height and

weight.

Never use a narrow track tractor on very uneven or

steeply sloping ground.

Never leave the tractor seat while the machine is

operating.

Carrying people or animals on the machine when

working or in transport is strictly forbidden.

Inhaltsverzeichnis

Andere KUHN Landwirtschaftliche Geräte Handbücher

KUHN

KUHN HRB 122 Bedienungsanleitung

KUHN

KUHN GF 5001 MHA Bedienungsanleitung

KUHN

KUHN ALTOR 7560 Bedienungsanleitung

KUHN

KUHN Venta 3030 Bedienungsanleitung

KUHN

KUHN GA 3501 Super Bedienungsanleitung

KUHN

KUHN FC703 RA Bedienungsanleitung

KUHN

KUHN GA 6000 Bedienungsanleitung

KUHN

KUHN FC244 Bedienungsanleitung

KUHN

KUHN GF5001 THA Bedienungsanleitung

KUHN

KUHN GF8702 Bedienungsanleitung

KUHN

KUHN GMD 700 G II Bedienungsanleitung

KUHN

KUHN Hector 3000 Bedienungsanleitung

KUHN

KUHN ALTOR 4560 Bedienungsanleitung

KUHN

KUHN GF222T Bedienungsanleitung

KUHN

KUHN VBP 2160 Bedienungsanleitung

KUHN

KUHN PZ 320C Bedienungsanleitung

KUHN

KUHN FC313 RF Bedienungsanleitung

KUHN

KUHN GF 4201 MH Bedienungsanleitung

KUHN

KUHN SR600 GII Bedienungsanleitung

KUHN

KUHN GF 5801 MH Bedienungsanleitung

KUHN

KUHN GA6501 Bedienungsanleitung

KUHN

KUHN GF 5000 T Bedienungsanleitung

KUHN

KUHN SpeedRake SR108 Bedienungsanleitung

KUHN

KUHN EL162 Bedienungsanleitung

Beliebte Landwirtschaftliche Geräte Handbücher anderer Marken

GSi

GSi PNEG-2314 Bedienungsanleitung

Checchi & Magli

Checchi & Magli TEXDRIVE Bedienungsanleitung

Amazone

Amazone Cenius 4003-2TX Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Bedienungsanleitung

Cima

Cima BLITZ Bedienungs- und Wartungsanleitung

Amazone

Amazone CombiDisc 3000 Montageanleitung

HE-VA

HE-VA Disc-Roller XL Contour Bedienungsanleitung

AGT

AGT AGT-SSFM Bedienungsanleitung

Milestone

Milestone 72-84 Bedienungsanleitung

Krone

Krone X-Disc 6200 Bedienungsanleitung

Eliet

Eliet DZC450 Bedienungsanleitung

Taarup

Taarup BIO+ B4000 Bedienungsanleitung

Garland

Garland SHAKER 310 DPG Bedienungsanleitung

stable comfort

stable comfort StableWall System Bedienungsanleitung

Raven

Raven AccuBoom Bedienungsanleitung

International

International 710 Bedienungsanleitung

Ashland

Ashland HDW-3217-14 Bedienungsanleitung

TURF TANK

TURF TANK One+ Bedienungsanleitung