Kuppersberg F 926 Montage- und Wartungsanleitung

TECHNICAL PASSPORT

ПАСПОРТ ТЕХНИЧЕСКОГО ИЗДЕЛИЯ

EXTRACTOR HOOD

КУХОННАЯ ВЫТЯЖКА

F 926 / 626, F 951 / 651, F 960 / 660

F 600, F 625, F 925, F W 610, F W 620, F W 910

TECHNICAL PASSPORT ENGLISH

Extractor hood

SECTION 1

SAFETY PRECAUTIONS.................................................................................................. 3

SECTION 2

SPECIFICATIONS................................................................................................................ 4

SECTION 3

CONTROL................................................................................................................................ 4

SECTION 4

MOUNTING AND DIMENSIONS ................................................................................. 5

SECTION 5

CLEANING AND MAINTENANCE ............................................................................... 8

SECTION 6

TROUBLESHOOTING........................................................................................................ 9

SECTION 7

HELPFUL INFORMATION .............................................................................................. 10

CONTENTS

ENGLISH TECHNICAL PASSPORT

Extractor hood

DEAR CUSTOMER,

Thank you for purchasing our

equipment! We are sure that appliances

of the KUPPERSBERG brand, which are

modern, functional and made of high

quality materials and components, will

be a reliable assistant in your kitchen.

Please read this manual carefully

before starting any installation work. It

will help you avoid premature failure, as

well as extend the life of your appliance

to the maximum possible.

Please note that the installation

of this appliance must be carried

out by a qualiﬁ ed technician and in

accordance with these instructions.

The manufacturer is not liable for any

consequences of failure to observe this

condition.

Caution!

The manufacturer reserves the right

to make any changes, without prior

notice, to design, outside appearance

and scope of supply of appliance, which

will be considered as necessary and

useful according to the manufacturer’s

point of view. Possible modiﬁ cations

will not affect the basic properties,

including those that relate to safe

operation of the appliance.

SECTION 1.

SAFETY PRECAUTIONS

1. Assembling and electrical

connection of the appliance must be

carried out by skilled technicians of

authorized service center.

2. The appliance is designed to

operate on 220-240 V AC. Make sure

that the technical parameters of your

home power supply system correspond

to the data for the power supply. If

parameter values are above or below

the speciﬁ ed range, the use of the

appliance is prohibited.

3. Do not connect the kitchen air

cleaner to the ventilation channels that

are used to remove smoke and fumes

from the equipment operating on any

other energy sources except electric

one.

4. The appliance is to be connected

only to an earthed power supply system.

5. Do not cook ﬂ ammable foods

below the kitchen air cleaner.

6. Use aluminum ﬁ lter that comes

with the appliance. The use of other

materials is prohibited!

7. Do not connect the appliance

to the power supply system, until

the assembly and installation of the

appliance is completed.

8. Do not use the appliance without

the aluminum ﬁ lter in place.

9. Do not touch the lamps.

10. Do not remove the aluminum

ﬁ lter while the appliance is in operation.

11. Do not disconnect the appliance

from the power supply system directly.

If necessary, turn the appliance off using

the control panel and, only after that,

unplug it from the power supply system.

When switching on: ﬁ rst connect the

appliance to the power supply system,

then switch it on using the control

panel, but not vice versa!

TECHNICAL PASSPORT ENGLISH

Extractor hood

12. The appliance requires regular

cleaning and maintenance work.

13. When installing the appliance,

observe the required distance between

it and the cooking surface of your stove:

- for an electric stove: at least 65 cm

- for a gas or gas-electric stove: at

least 70 cm

14. Do not allow children to play

with packaging materials, it can be

dangerous!

15. For best air cleaning in your

kitchen, do not turn off the appliance

immediately after the cooking process

is completed: let the appliance run for

a further 15 minutes. For this purpose

you can also use the timer function (the

button «Auto Switch Off Timer» on the

control panel).

16. Ensure adequate ventilation in

the kitchen, if a gas stove is operated

simultaneously with the appliance.

17. In case of any malfunctions,

contact your nearest authorized service

center.

18. If the kitchen hood is supposed

to operate in air discharge mode, then

during installation it is important to

provide a duct of the corresponding

diameter.To prevent loss of performance

caused by aerodynamic resistance of

the duct, the air duct must not be too

long, or curved. Never restrict the duct

size, or make sharp bends. In addition,

it is preferable to use smooth PVC duct

(round or ﬂ at), rather than the ﬂ exible

corrugated one because bends of a

corrugated duct increase the noise level

of the hood.

19. The manufacturer does not bear

any responsibility for any possible

damage, in case of non-compliance

with above precautions.

SECTION 2.

SPECIFICATIONS

Wall hood

Width.................................... 500-600-900 mm

Control type ....................... Touch

Suction power................... 800 m3

Lamps................................... Halogen 2х20 W

(or 2х40 W)

Diameter of the air

discharge pipe .................. 120-150 mm

Voltage................................. 220-240 V / 50 Hz

Modes of operation......... Air discharge /

Recirculation

Noise level ......................... 32- / 42-58 dB

SECTION 3.

CONTROL TYPE

Touch control

А – On/Off switch

В – Power decrease

С – Display

D – Power increase

E – Auto Switch Off Timer

F – Lighting

А – Hood motor On/Off

В – Motor rotation speed decrease

(suction power reducing)

ENGLISH TECHNICAL PASSPORT

Extractor hood

С – Display shows motor rotation

speed

D – Motor rotation speed increase

(suction power increasing)

E – When you press on the Timer,

the motor will automatically be shut

down after 15 minutes. To activate the

function, press and hold the Timer for

3 seconds (rotation speed level starts

to ﬂ ash on the display). To cancel, press

once on the Timer.

F – Lighting On/Off

SECTION 4.

Mounting and dimensions

Please unpack and inspect the

appliance! Before starting installation,

make sure that the hood has no obvious

transport damages. If such defects are

detected, do not install or connect the

appliance to the mains.

1.To install the air cleaner above the

stove, draw a vertical line on the wall

from the center of the stove vertically

to the ceiling. To comply with safety

regulations, the distance between the

cooking surface and the air cleaner

should be 700 mm. Accordingly, make

a mark with a pencil on the vertical

line at a height of 700+426=1126 mm

from the surface of the stove. Draw a

horizontal line through this point on

the wall. Measure 100 mm on this line

to the right and left from the point

of intersection of the vertical and

horizontal lines and make marks with

a pencil. Using a 6-mm drill bit, drill

holes in these marks. Insert dowels in

the holes just drilled and ﬁ x the hooks.

2. Installation of decorative cover

Draw a horizontal line on a wall, at

a distance of 75 mm from the ceiling.

Measure 50 mm on this line to the right

and left from the point of intersection

with the vertical line and make marks

with a pencil. On these marks, drill the

holes, insert the 8-mm dowels in them

and tighten 2.5-mm screws which must

protrude 2 mm from the wall.

Step 1: Installation of hooks

Step 2: Installation of mounting

bracket

Step 3: Installation of housing

Step 4: Installation of external part

of decorative cover

Step 5: Installation of internal part

of decorative cover

1- Ø8 dowel

2- Mounting bracket

3- Hook

4- Internal part of decorative cover

5- External part of decorative cover

6- Air cleaner housing

7- Bushing adapter

8- Ø 2.5 screw

TECHNICAL PASSPORT ENGLISH

Extractor hood

F 925 / 625

Step 2

Step 1

Kitchen stove

ENGLISH TECHNICAL PASSPORT

Extractor hood

F 960 / 660

F 926 / 626

F 600, FW 610, FW 620, FW 910

F 951 / 651

TECHNICAL PASSPORT ENGLISH

Extractor hood

SECTION 5.

Cleaning and maintenance

Caution! Before you start cleaning

the appliance, disconnect it from the

power supply.



Aluminum ﬁ lter is designed to trap

grease particles out of the ﬂ ow of air

running through it. For this reason,

the ﬁ lter needs regular cleaning. The

cleaning interval depends on the

frequency of use of the air cleaner.

Generally, it is recommended to clean it

once a month.

To do this, remove the ﬁ lters, wash

them in water with a neutral liquid

detergent, dry them, then set them back

in the air cleaner. Over time, ﬁ lters may

change color due to a regular washing.

This is a natural process, which does not

indicate a defect, so ﬁ lter replacement

is not required.

The aluminum ﬁ lters can be washed

in the dishwasher.

How to remove aluminum



1. Press on the latch of the ﬁ lter lock.

2. Pulling down a bit, remove the

ﬁ lter.

In order to put the ﬁ lters in place

after cleaning, follow the above

instructions in reverse order.



recirculated air mode)

Carbon ﬁ lter is designed to trap

odors and fumes while cooking.It is used

in cases where there is no possibility

to connect the air cleaner to a special

ventilation duct for discharging air

outward. When operating the appliance

with a carbon ﬁ lter, contaminated air is

sucked into the appliance and passes

through a carbon ﬁ lter, and then clean

air is supplied to the kitchen.

The carbon ﬁ lter should be replaced

at regular intervals. The interval of ﬁ lter

replacement depends on the frequency

of use of the air cleaner, style of cooking

and frequency of the aluminum ﬁ lter

cleaning. Generally, it is recommended

to replace the carbon ﬁ lter once every

4 months.



1. Remove aluminum ﬁ lters.

2. Turn the carbon ﬁ lter to the left

and pull it.

3. Replace the old carbon ﬁ lter with

the new one.

4. Put the ﬁ lter back into place.

If necessary, clean the outside of the

air cleaner with a soft, damp cloth. Do

not use any abrasive cleaning agents.

For painted stainless steel surfaces: to

avoid scratching it is recommended to

wipe them with a soft, damp cloth in the

painting direction. Do not remove the

lamp cover during the surface cleaning

process.

Caution!

Do not use the steam generators for

cleaning.

Caution!

Not following the above rules for

cleaning the appliance and replacing



ENGLISH TECHNICAL PASSPORT

Extractor hood

Replacing lamps

Before replacing lamps, disconnect the appliance from the power supply. Then,

with a screwdriver, pry and remove the lamp cover, while supporting it from below.

Remove the burned-out lamp and replace it with a new one. Put the lamp cover into

place, press it slightly and ﬁ x it. Caution: do not touch the halogen lamp with your

ﬁ ngers, it signiﬁ cantly reduces its lifetime. Use a soft, dry cloth.

Caution!



supply and proceed with disassembly. It is recommended that you transport it in the

original packaging. If this packaging is not available, package the appliance using

materials that prevent possible damage resulting from transportation.

SECTION 6.

Troubleshooting

Very often a malfunction of the appliance occur for minor reasons. So, before you

call for service center, please check whether you can troubleshoot yourself. For this

purpose please check the following possible causes of malfunctions.

Malfunction Possible cause Troubleshooting action

The appliance does not

operate

...Faulty fuse

...Plug is not properly

inserted into the outlet

...There is no voltage in

the power supply system

1. Check the fuse of the

appliance

2. Make sure that plug is

properly inserted into the

outlet

Suction power is not

sufﬁ cient

...Incorrect speed

selected

...Filters are clogged

1. Increase suction speed of

hood

2. Clean or replace ﬁ lters

The lamp is not

lighting

...Faulty fuse

...The lamp is burned out

or incorrectly installed

1. Check the fuse of the

appliance

2. Make sure that the lamp

is installed correctly or

replace it

TECHNICAL PASSPORT ENGLISH

Extractor hood

SECTION 7.

Helpful information

Physical characteristics of the sound volume (the sound pressure level) is

measured in decibels (dB). «Noise» is a chaotic mix of sound.

The human ear can detect sounds with sound volume of 10-15 dB and above.

When choosing a kitchen hood,it is necessary to pay special attention to technical

indicators such as the noise level. This indicator is very important, because, and

that’s beyond a shadow of a doubt, each of us spends a lot of time on the kitchen. It

is especially common for women who love to please their loved ones with delicious

cooked dishes.

According to the surveys, 40% of women do not use kitchen hoods for their

intended purpose (it refers to the process of air suction), precisely because they are

annoyed with the noise level.

Consequently, such a necessary and needed in the kitchen appliance, kitchen

air cleaner, designed to remove airborne odors, grease, soot and smoke, becomes

almost meaningless.

This allows you to make the cooking process the most comfortable and helpful.

For more complete understanding of the scale of decibels, you can compare

parameters of the following guidelines:

Intensity of typical noise sources

Approximate sound

pressure level dB Characteristics Sound source and distance

160 Shock, trauma Shot of a gun of 0.303 caliber close to your ear

150 Contusion, trauma Rise of the lunar rocket, 100 m

140 Contusion Rise of the jet plane, 25 m

120 Almost unbearable Engine room of submarine Jackhammer, 1 m

100 Extremely noisy Very noisy factory Subway car (intermittently)

90 Very noisy

Heavy diesel truck, 7 m

Road drill (without mufﬂ er), 7 m

Railway freight wagon, 7 m

80 Very noisy Ringing alarm clock, 1 m

Motorcycle with a silencer, 1 m

75 Noisy Inside railway carriage

Shout, 1 m Loud laughter, 1 m

70 Noisy

Inside a small car, moving at a speed of 50 km/h

Home vacuum cleaner, 3 m

Loud conversation, 1 m

65 Clearly audible Typewriter Normal conversation, 1 m

40 Quite audible Institution, where there are no special sources of noise

35 Hardly audible Room of a quiet apartment

Very mufﬂ ed conversation

25 Quiet Rural areas located far from roads

Whisper of a person, 1 m

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Kuppersberg Dunstabzugshaube Handbücher

Kuppersberg

Kuppersberg WL-TUBA Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg T 939 Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg LORA Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg F690 Bedienungsanleitung

Kuppersberg

Kuppersberg F630 Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg INLINEA 60 Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg IBOX 60 Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg SLIMLUX IV 60 X Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg DDA 990 Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg DUDL 4 LX Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg INBOX Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg F 951/651 Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg Grande 90 X Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg Opera IS X 1HHM Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg AMSCH 90 Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg INTRO 60 Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg SLIMTURBO 60 Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg TAIS Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg INNOVA60 Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg INBOX 54 Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg INLINEA 52 Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg LORA 90/60 Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg MOTUBA Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg T 939 ANT Bedienungsanleitung

Beliebte Dunstabzugshaube Handbücher anderer Marken

emmeti

emmeti RECUPA MED A-140 Leitfaden

Nibe

Nibe F135 Bedienungsanleitung

Zephyr

Zephyr Spruce AK9834BS Installationsanleitung

Hisense

Hisense MH6INBG Bedienungsanleitung

Miele

Miele DA 1255 Bedienungsanleitung

Broan

Broan 46000 Bedienungsanleitung

GE Profile PV977 Originalbetriebsanleitung

FALMEC

FALMEC FFRIA24W5FS Bedienungsanleitung

Whirlpool

Whirlpool RH2600XL-1 SERIES Bedienungsanleitung

ETNA

ETNA AV360RVS Bedienungsanleitung

JUNO

JUNO JDF603E6 Bedienungsanleitung

Miele

Miele DA 6708 D Bedienungsanleitung

Tricity Bendix

Tricity Bendix LE 150 Handbuch

AEG

AEG X68163BV1 Bedienungsanleitung

AEG

AEG 125 D Bedienungsanleitung

Smeg

Smeg KSEV97X Bedienungsanleitung

Nibe

Nibe S Series Benutzerhandbuch

Caple

Caple CCH100 Handbuch