Kurzweil KME-61 VERSION 2 SOFTWARE Betriebsanleitung

KME-61 VERSION 2 SOFTWARE SUPPLEMENT

-Jan. 2004-

• What Is It?

Software version v2 is the latest set of feature enhancements for the KME-61 keyboard.

• What Does It Do? (i.e. what are the new features in v2?)

v2 adds new controller features to the KME-61:

-the ability to program independent controller assignments per zone within a setup.

See the section below marked “Additional features added in v2” for operational details.

• How Do I Know If I Have v2?

If you received this document along with the purchase of a KME-61, then the v2 software

should already be installed in your unit. If you did not receive this document along with your

instrument or if you just want to confirm things, you can check what version of software you

currently have installed by doing the following:

1) turn KME-61 on

2) while powering up, you will see the current software revisions installed in your unit

3) if your unit has v2 (front software), you will see the following in the display:

• Where Can I Get It If I Don’t Have It?

Please visit your local authorized Kurzweil Music Systems service center to have v2 installed.

To locate a service center near you please visit our website at:

http://www.kurzweilmusicsystems.com/support-service-center-search.html?Id=296

For further information please contact:

Email= [email protected]

Web= www.kurzweilmusicsystems.com

FRONT VER 2.01

ENGINE VER 1.10

KME-61 Addendum

Additional features added in v2

Per Zone Controller Assignments:

When in Setup Mode, using the previous v1.xx software, all physical controllers, including the

optional pedals, worked the same for all zones simultaneously and were always enabled. To

improve live performance usefulness, Version 2 software allows controllers to be reassigned

or turned off on a per-zone basis. This is accomplished by adding several parameters to the

Setup Mode Menu which are described below.

Setup Edit Pages (new v2 parameters in BOLD)

1. Edit Sound Select

2. Edit Key Range Low, High

3. Edit Note Shift

4. Edit Vel. Range Low, High

5. Edit Volume

6. Edit Effects Type

7. Edit FX A, FX B Level

8. Edit MIDI Channel

9. Edit MIDI Bank, Program

10. Edit MIDI Volume

11. Edit Mono Pressure

12. Edit Pitch Wheel

13. Edit Data Slider

14. Edit Modulation Wheel (Mod Wheel)

15. Edit Continuous Controller Pedal (CC Pedal)

16. Edit Switch Pedal (SW Pedal)

Detailed Parameter Descriptions:

Mono Pressure (Keyboard Aftertouch) and Pitch Wheel controllers only have an on/off

parameter.

11. Mono Pressure

In Setup Edit Mode, press the Menu Down button 14 times or hold until the Edit Mono

Pressure screen appears as below.

This screen allows you to turn Mono Pressure on or off for each zone easily. First select the

zone, 1, 2, or 3 by pressing one of the soft buttons under the display. The selected zone is

shown in the upper left corner of the display. Then use the + button to turn On or - button to

turn Off Mono Pressure in that zone.

Z1:Edit Mono Press

MPress: On

12. Pitch Wheel

Press the Menu Down button once again to see the Edit Pitch Wheel screen.

This parameter allows you select which zones are affected by the pitch wheel.

Select the zone and on/off setting as with Mono Pressure described above.

Each of the remaining controllers has two parameters: MIDI Controller Number and Entry

Value which is the initial value sent when the setup is selected.

13.Data Slider

The next screen after Edit Pitch wheel (see above) is Edit Data Slider.

You can move the indicator (->) to select the MIDI Controller Number (CtrN) or Entry Value

(EntV) by using the Menu Up/Down buttons. Select the zone with the soft buttons under the

display and change the value with the + and – buttons OR by moving the front panel “Data

Slider”.

CtrN can have values of 1-119. EntV can have values of 1-127. The default CtrN for the data

slider is 6, MIDI Data Entry.

Additionally, each parameter can have a value of "None". When you choose a value of

"None", it has a special function.

If CtrN is set to None, the controller will not send any MIDI messages for the zone and will not

affect the sound of the program selected for the zone.

If EntV is set to None, the entry value will be the current value (physical position) of the data

slider

14. Modulation Wheel (Mod Wheel)

The next screen after Edit Pitch Wheel is Edit Mod Wheel. Press the Menu Down button once

or twice to reach it.

The parameters, editing method and available values are the same as for the data slider.

The default MIDI Controller Number for Modulation wheel is 1 (Mod Wheel)

15. Continuous Controller Pedal (CC Pedal)

The next screen after Edit Mod Wheel is Edit CC Pedal. Press the Menu Down button once

or twice to reach it.

Z1:Edit Pitch Wheel

PWheel: On

Z1:Edit Data Slide

CtrN:6 EntV:None

Z1:Edit Mod Wheel

CtrN:1 EntV:None

Z1:Edit CC Pedal

CtrN:11 EntV:None

KME-61 Addendum

The parameters, editing method and available values are the same as for the data slider.

The default MIDI Controller Number for CC Pedal is 11 (Expression).

Please pay special attention to the Entry Value for this parameter. If it is set to a small value

or Zero, the zone will be silent until the CC pedal is moved. If it is set to a high value or 127,

the zone may play much louder than expected.

16. Switch Pedal (SW Pedal)

The next screen after Edit CC Pedal is Edit SW Pedal. Press the Menu Down button once or

twice to reach it.

The parameters, editing method and available values are the same as for the data slider.

The default MIDI Controller Number for SW Pedal is 64 (Sustain Pedal). As this is a “switch

type” controller, entry values of 63 or less are treated as "Off". Entry values of 64 or more are

treated as "On".

Compatibility between V1.xx and V2 front software

Version 2 front software can import setups saved from v1.xx.

However, v1.xx cannot import v2 setups, because of their increased size.

Z1:Edit SW Pedal

CtrN:64 EntV:None

Andere Handbücher für KME-61 VERSION 2 SOFTWARE

Inhaltsverzeichnis

Andere Kurzweil Elektronische Tastatur Handbücher

Kurzweil

Kurzweil K1000 KEYBOARD - MUSICIANS GUIDE Bedienungsanleitung

Kurzweil

Kurzweil K2500 Anleitung zur Verwendung

Kurzweil

Kurzweil K2600 BEST OF VAST - REV A Bedienungsanleitung

Kurzweil

Kurzweil K2600 - MUSICIANS GUIDE REV A PART NUMBER 910330 CHAP... Bedienungsanleitung

Kurzweil

Kurzweil K2500 Referenzhandbuch

Kurzweil

Kurzweil K2500 Bedienungsanleitung

Kurzweil

Kurzweil PC3A Bedienungsanleitung

Kurzweil

Kurzweil Forte SE Bedienungsanleitung

Kurzweil

Kurzweil K2600 BEST OF VAST - REV A Bedienungsanleitung

Kurzweil

Kurzweil K2600 V2.0 - MUSICIANS GUIDE SUPPLEMENT REV... Bedienungsanleitung

Kurzweil

Kurzweil K2600 BEST OF VAST - REV A Fehlerbehebungshandbuch

Kurzweil

Kurzweil K2600 - MUSICIANS GUIDE REV A PART NUMBER 910330 CHAP... Bedienungsanleitung

Kurzweil

Kurzweil K1200 PRO EXPANDER MUSICIANS Bedienungsanleitung

Kurzweil

Kurzweil M-1 Bedienungsanleitung

Kurzweil

Kurzweil K2000R Bedienungsanleitung

Kurzweil

Kurzweil K2661 Bedienungsanleitung

Kurzweil

Kurzweil K2500 Bedienungsanleitung

Kurzweil

Kurzweil PC3 Technisches Handbuch

Kurzweil

Kurzweil Flash Play PC4 Bedienungsanleitung

Kurzweil

Kurzweil Forte Bedienungsanleitung

Kurzweil

Kurzweil K2600 V4 GM MODE - REV B Bedienungsanleitung

Kurzweil

Kurzweil Flash Play PC4 Bedienungsanleitung

Kurzweil

Kurzweil K2600 BEST OF VAST - REV A Bedienungsanleitung

Kurzweil

Kurzweil PC3 Bedienungsanleitung

Beliebte Elektronische Tastatur Handbücher anderer Marken

Casio

Casio LK-50 Konfigurationshandbuch

Casio

Casio VZ-1 Fehlerbehebungshandbuch

Casio

Casio Privia PX-100 Bedienungsanleitung

Yamaha

Yamaha PortaTone PSR-225GM Bedienungsanleitung

Behringer

Behringer U-CONTROL UMX49 Bedienungsanleitung

Yamaha

Yamaha Portatone X2500 Bedienungsanleitung

Yamaha

Yamaha Portatone PSR-100 Bedienungsanleitung

Casio

Casio WK-1600 Bedienungsanleitung

Keith McMillen Instruments

Keith McMillen Instruments K-Board Pro 4 Technisches Datenblatt

Yamaha

Yamaha PortaSound PCS-30 Bedienungsanleitung

Roland

Roland Juno-6 Bedienungsanleitung

McGrey

McGrey 6170 Bedienungsanleitung

Yamaha

Yamaha PortaTone PSR-41 Bedienungsanleitung

HDC

HDC Kurzweil KP300X Bedienungsanleitung

Casio

Casio Celviano AP-45 Bedienungsanleitung

Akai

Akai MPK88 Bedienungsanleitung

Waldorf

Waldorf IRIDIUM Bedienungsanleitung

Yamaha

Yamaha NP-30 Montageanleitung