Kurzweil PC3 Technisches Handbuch

System Update Instructions for the PC3

updated 6/08

TOOLS REQUIRED TO PERFORM UPDATES:

-Computer (Mac or PC) with USB port + USB cable

and/or

-Computer (Mac or PC) with xD Media Card drive + xD card (512Mb or smaller - details below)

!! Before updating, be sure to back up any custom programming as user memory will be erased in the process.

Please see the Getting Started Guide, Chpt. 13 "Storage Mode", for details. !!

UPDATE PROCEDURE:

1. Obtain the latest system updates

Go to www.kurzweilmusicsystems.com and follow the links to the PC3 product page downloads tab. Be sure to

download the most recent update package.

2. Enter the Bootloader

Press and hold the EXIT button while you power-up the PC3. Release the EXIT button when the Boot Loader’s

menu of options appears on the screen. The options shown are:

RUN UPDATE RUN SYSTEM FILE

PC3 IMAGE DIAGS RESET UTILITIES

You will use the various "soft buttons" under the screen to control the update process. To start, press the

second soft button from the left, labeled UPDATE IMAGE.

3. Copy the O/S and Objects (please read carefully as the installation instructions have changed)

The software ﬁles need to be either (a) copied to an xD card and then physically transfered to the PC3 -or- (b)

sent to the PC3 via direct USB cable connection. O/S ﬁles will have the extension “.BIN”. Soundware object ﬁles

have the extension “.PC3". One of each are included in this download.

(a) To copy using an xD card, you must have an appropriate card writer unit on your computer. You must also

have a formatted xD card (up to 512 Mb in size). The card may be formatted on either a Windows or MacOS

system, or it may come pre-formatted. If you format it yourself, be sure to use DOS format (FAT 16). Cards of up

to 128 Mb may also be formatted on the PC3 itself using the FILE UTILITIES menu.

Copy the"PC3"OS (.BIN) and Object (.PC3) ﬁles"to the card using the method speciﬁc to your computer system.

Remove the card from your computer and place it in the PC3 card slot on the back right corner of the keyboard.

The card goes into the PC3 with the contacts facing upward.

(b) To copy via USB, plug the USB cable into the PC3 and into a computer running Windows or

MacOS. A PC3 device image should appear on the desktop as an icon or a window depending on the operating

system. ** Drag"and drop the PC3"OS (.BIN) ﬁrst and proceed with installation steps 4-6 below. Once complete,

clear the USB removable device/window and then copy the Object ﬁle (.PC3) onto the USB removable device/

window. Continue with installation step 7.

** NOTE: beginning with version v1.01 the OS and Object files are collectively too large to fit in the USB desktop

mounted volume at the same time and necessitate being copied and installed one file at a time, clearing the

volumes' contents after the first file is installed.

4. Install the O/S (.BIN ﬁle)

Press the soft button under the screen labeled UPDATE IMAGE then MAIN IMAGE when asked to choose a

module to update.

5. You may see "Choose an external device:"

Depending on the presence of an xD card (or lack thereof) you may see a screen prompting you to select your

update method: CARD or USB PORT. If prompted, select your method by pressing the appropriate soft button.

6. Select the O/S ﬁle (.BIN) name from the list

Use the alpha wheel or + and - buttons to move through the list of ﬁles displayed. If you have subdirectories set

up on a card, you can use the DOWN and UP soft buttons to navigate through the directories. Press the

CHOOSE soft button to select the main image ﬁle. It should have a name beginning with "PC3" and the ﬁle

extension ".BIN".

You should see a completion message appear on the PC3 screen as the installation is done. The actual

installation should take no more than 10 or 15 seconds to complete. Press OK to return to the main menu.

USB Users ! at this point you will need to clear the desktop USB removable device/window (i.e. drag OS ﬁle to

the trash - may necessitate emptying the trash to actually clear space) and copy the Object ﬁle (.PC3) onto the

desktop USB removable device/window.

If errors occur, the problem should be shown on the PC3 screen. Make sure you've chosen a valid PC3

installation ﬁle to install - incorrect ﬁles will not install, preventing the creation of a working system. It is also

possible that there will be problems reading certain xD cards on the PC3. Make sure the card is 512 Mb or

smaller in size, and that it is formatted for DOS FAT16 or FAT12. Sometimes it is necessary to remove the card

from the slot and place it in again.

7. Install the factory soundware objects (.PC3)

Press UPDATE IMAGE again and this time choose MAIN OBJECT as the module to install. Following the same

methods as described above (steps 5 & 6) select the object ﬁle to install . The object ﬁle name will have the ﬁle

extension of ".PC3".

You should see a completion message appear on the PC3 screen as the installation is done. Press OK to return

to the main menu.

8. Perform a System Reset

Press SYSTEM RESET. On the subsequent "warning" screen, press RESET to conﬁrm. The user memory will

be erased and you will be returned to the main menu.

9. Run the PC3 with the newly installed system

If both installations worked correctly, you're now ready to run your updated PC3. Press the leftmost soft button

labeled RUN PC3. In the future, powering the unit on will automatically start this for you, and you won't need to

interact with the boot loader program unless you want to update the system with another version.

/END

Andere Handbücher für PC3

Inhaltsverzeichnis

Andere Kurzweil Elektronische Tastatur Handbücher

Kurzweil

Kurzweil PC3 Bedienungsanleitung

Kurzweil

Kurzweil K2vx Bedienungsanleitung

Kurzweil

Kurzweil KME-61 VERSION 2 SOFTWARE Betriebsanleitung

Kurzweil

Kurzweil K2600 BEST OF VAST - REV A Bedienungsanleitung

Kurzweil

Kurzweil K2500 Referenzhandbuch

Kurzweil

Kurzweil PC3A Bedienungsanleitung

Kurzweil

Kurzweil KP30 Bedienungsanleitung

Kurzweil

Kurzweil ExpressionMate Bedienungsanleitung

Kurzweil

Kurzweil Flash Play PC4 Bedienungsanleitung

Kurzweil

Kurzweil K2600 BEST OF VAST - REV A Bedienungsanleitung

Kurzweil

Kurzweil K2600 BEST OF VAST - REV A Bedienungsanleitung

Kurzweil

Kurzweil K2600 BEST OF VAST - REV A Bedienungsanleitung

Kurzweil

Kurzweil K2600 BEST OF VAST - REV A Fehlerbehebungshandbuch

Kurzweil

Kurzweil PC3LE Bedienungsanleitung

Kurzweil

Kurzweil Forte Bedienungsanleitung

Kurzweil

Kurzweil K2600S Bedienungsanleitung

Kurzweil

Kurzweil EP Series EP-400 Bedienungsanleitung

Kurzweil

Kurzweil K2600 V4 GM MODE - REV B Bedienungsanleitung

Kurzweil

Kurzweil MPS10 Bedienungsanleitung

Kurzweil

Kurzweil K1200 PRO 76 - PERFORMANCE GUIDE Bedienungsanleitung

Kurzweil

Kurzweil K1200 PRO EXPANDER MUSICIANS Bedienungsanleitung

Kurzweil

Kurzweil K2000R Bedienungsanleitung

Kurzweil

Kurzweil PC2 - MUSICIANS GUIDE REV A Bedienungsanleitung

Kurzweil

Kurzweil K2600 ROM - INSTALLATION REV E Bedienungsanleitung

Beliebte Elektronische Tastatur Handbücher anderer Marken

Casio

Casio LK-50 Konfigurationshandbuch

Casio

Casio VZ-1 Fehlerbehebungshandbuch

Casio

Casio Privia PX-100 Bedienungsanleitung

Yamaha

Yamaha PortaTone PSR-225GM Bedienungsanleitung

Behringer

Behringer U-CONTROL UMX49 Bedienungsanleitung

Yamaha

Yamaha Portatone X2500 Bedienungsanleitung

Yamaha

Yamaha Portatone PSR-100 Bedienungsanleitung

Casio

Casio WK-1600 Bedienungsanleitung

Keith McMillen Instruments

Keith McMillen Instruments K-Board Pro 4 Technisches Datenblatt

Yamaha

Yamaha PortaSound PCS-30 Bedienungsanleitung

Roland

Roland Juno-6 Bedienungsanleitung

McGrey

McGrey 6170 Bedienungsanleitung

Yamaha

Yamaha PortaTone PSR-41 Bedienungsanleitung

HDC

HDC Kurzweil KP300X Bedienungsanleitung

Casio

Casio Celviano AP-45 Bedienungsanleitung

Akai

Akai MPK88 Bedienungsanleitung

Waldorf

Waldorf IRIDIUM Bedienungsanleitung

Yamaha

Yamaha NP-30 Montageanleitung