Kusam-meco KM 63A Bedienungsanleitung

®®

AN ISO 9001:2008 COMPANY

MODEL - KM 63A

DIGITAL

VIBRATION METER

OPERATION MANUAL

G 17, Bharat Industrial Estate, T. J. Road,

Sewree (W), Mumbai - 400 015. INDIA.

(022) 24156638Sales Direct :

(022) 24124540, 24181649. (022) 24149659Tel. : Fax :

[email protected] Email :

www. Website : kusamelectrical.com

www.kusam-meco.co.in

LIST OF PRODUCTS

 Digital Multimeter  Digital AC & AC/DC Clampmeter

 AC Clamp Adaptor  AC/DC Current Adaptor

 Thermo Anemometer  Thermo Hygrometer

 Distance Meter  Digital Lux Meter

 Network Cable Tester  Power Factor Regulator

 Earth Resistance Tester  Digital Panel Meters

 DC Power Supplies  High Voltage Detector

 Calibrators  Gas Analysers

 Frequency Counter  Function Generator

 Phasing Sticks  Battery Tester

 Waterproof Pen Testers  Solar Power Meter

 EMF Detector

 Wood, Paper & Grain Moisture Meter

 Transistorised Electronic Analog & Digital Insulation

Resistance Testers(upto 10 KV)

 Digital Sound Level Meter & Sound Level Calibrator

 Digital contact & Non-contact Type Tachometer

 Digital Non-contact (infrared) Thermometer

 Maximum Demand Controller/Digital Power Meter

 Digital Hand Held Temperature Indicators

DIGITAL

VIBRATION METER

MODEL - KM 63A

TABLE OF CONTENTS

TITLE PAGE NO.

I. .................................Before Use..................

II. Features......................................................

III. Specifications.............................................

IV. Diagram of the Unit....................................

V. Operating Instructions...............................

VI. Maintenance.................................................

VI. Test Certificate.............................................

VII. Warranty.......................................................

® ®

I. BEFORE USE :

A. Check-Up :

Carefully unpack your kit and ensure that you have the following

items. In case that any item is missing or if you find any mismatch

or damage, promptly contact your dealer.

 Vibration meter 1 PCS

Handle sub-unit 1 PCS

9V battery 1 PCS

User manual 1 PCS

Detector probe attachments ”L” 1 PCS

Detector probe attachments ”S” 1 PCS

Magnetic probe 1 PCS

Aluminum box 1 PCS

B. Introduction :

This product adopts piezoelectric effect of artificial polarized

ceramic for design. It is suitable for monitoring of all kinds of

vibrating mechanical facility, specially the vibration measurement

of rotating and reciprocating machinery. The unit can measure

acceleration, velocity and displacement, which is widely used in

mechanical manufacture, electric power metallurgy and general

aviation field etc.

II. FEATURES :

 LCD displays measurement result and conditions directly.

Measures acceleration (m/s peak), velocity (mm/s ms), and

displacement (mm p-p).

Selective vibration characteristic.

Uses hi-sense of vibration sensor to measure accurately.

Equipped with two probes (S and L) to adapt the different 

measurement requirement.

Provides a magnetic probe to be used in conditions where it is

uneasy hold to the meter by hand.

Low battery indication.

Auto power off function.

LCD back light function.

Maximum value hold function.

Temperature unit ºC / ºF selection.

® ®

III. SPECIFICATIONS :

Technical parameter

Vibration pickup

Measurement range

of acceleration

Measurement range

of velocity

Measurement range

of displacement

Measurement accuracy

Measurement frequency

range of acceleration

Measurement frequency

range of velocity

Measurement frequency

range of displacement

Temperature range

Temperature accuracy

Display update cycle

LCD display

Single output

Power supply

Stand-by current

Operating current

Battery life

Auto power-off function

LCD backlight function

Operating temperature range

Operating humidity range

Low battery indication

Dimensions

Weight

Piezoelectric ceramic accelerometer (shear-type)

0.1~199.9m/s peak

0.1~199.9mm/s rms

0.001~1.999mm p-p

Velocity and displacement range is limited by

acceleration 199.9m/s

± (5% + 2 digits)

10Hz~1KHz(LO)

1KHz~15KHz (HI)

10Hz~1KHz(LO)

-10ºC~80ºC

± 2ºC

1 second

3 1/2 digits display

AC output 2V peak (display full scale), Load impedance

10K or more. Earphones can be connected

9V battery

 15A

 25mA

Approx. 20H continuous use

Turns off automatically after 60 seconds

7 seconds

0~40ºC

30~90%RH

6.4V ± 0.2V

70 x 30 x 150mm

Approx. 137g (not including battery)

Technical specification

IV. DIAGRAM OF THE UNIT : 1

A. Instruction of main parts :

1. Sub-unit handle connector (with directionality).

2. LCD screen.

ON/

MEAS

ON/ Off / measure button, press to turn on the meter. In

measurement mode, press for reading, release to hold the reading.

4. Frequency character selection button. (for acceleration)

HI/LO

5. Maximum value hold button.

MAX

HOLD

6. Temperature unit interchange button.

ºC/ ºF

A/V/D

7. Measurement mode (Acceleration/ Velocity/ Displacement)

select button.

8. Sub-unit handle on/off/measure button, press to turn on the

meter. In measurement mode, press for measurement, release

to hold the reading.

9. Detector head (Selective between probe head attachments “S” /

“L” and Magnetic probe.

Note : Above key function descriptions just are simple introduction,

for details please read operation instructions part in this manual.

®®

B. LCD Display :

1. : Battery mark shows current residual battery power. Has

following 5 grades :

: battery is sufficient.

: battery is comparative sufficient.

: battery is nearly deficient.

: battery is nearly exhausted, need to have a replacement.

: battery is exhausted completely.

2. LO : Low frequency symbol. (10Hz~1kHz)

3. Measured value display.

4. : Take the maximum value.

MAX

HOLD

6. : Temperature unit display, “ºC” for the Celsius scale, “ºF” for

the Fahrenheit scale.

5. Temperature and maximum value display.

7. : Value hold.

8. 2

mm/s : When measuring acceleration, LCD will display

acceleration unit “m/s ”.

When measuring velocity, LCD will display velocity unit

“mm/s ”.

When measuring displacement, LCD will display

displacement unit “mm”.

9. 1KHz : 1KHz indication.

10. HI : High frequency symbol. (1kHz~15kHz)

LO 1KHz HI

MAX

HOLD

mm/s

i888

. . .

i888

. . .

11. : Backlight icon, the back light will be active for 7 seconds.

V. OPERATING INSTRUCTIONS :

This vibration meter is designed to fit the different measurement

requirements as follows :

1. With Detector probe S : It provides good

response and reproducibility over a wide range.

ON/

MEAS

ON/

MEAS

2. With Detector head L : Suitable for narrow object or

special objects to obtain quick response.

3. With Magnetic probe : Suitable for measurement in

cases where flat Ferric object to the stable

measurement.

ON/

MEAS

4. Without probe tip : In this condition, best high-range

response is achieved (10Hz to 15kHz), but planar

contact with the measurement object is required.

ON/

MEAS

® ®

A. Battery installment :

1. Grip tightly the unit body with your left hand; hold down the

battery door with your right hand thumb to open it according to

the arrow referring direction, as shown in following figure :

2. Insert the 9V battery into battery compartment, note the battery

polarity, and then close the battery door.

B. Handle sub-unit installment :

Please pay attention to the directionality of the USB socket.

C. TURN ON THE UNIT AND CHECK-UP BATTERY :

1. Press the to turn on the main unit or on the handle sub-

unit key to turn on.

ON/

MEAS

ON/

MEAS

After the entire screen displays for 1 second, the default state is

acceleration mode. If the LCD displays the symbol or ,

(as shown in following figure) please promptly replace the battery.

Low battery indication.

LO 1KHz

m/s

000

D. SELECTING MEASUREMENT MODE :

1. Press “ ” to select the measuring mode, the default status is

accelerometer measurement “m/s ”, as following picture :

A/V/D

LO 1KHz

m/s

000

283

Acceleration

measure

Environment temperature

indication.

Press

®®

2. Press the “ ” key one time to select speed measuring mode

“mm/s”, as shown in the following picture.

A/V/D

LO 1KHz

mm/s

000

Velocity

measure

3. Press the “ ” key one more time to selecting displacement

mode “mm”, as shown in the following picture.

A/V/D

LO 1KHz

000

Displacement

E. Hi/ Lo frequency selection :

Hi frequency “HI” is only for acceleration measure mode. Press

“ ” key to select the high frequency measurement mode or

low frequency measurement mode.

HI/LO

LO 1KHz

m/s

000

Low frequency

measuring (10Hz~1kHz)

LO 1KHz HI

m/s

000

Acceleration

measure

High frequency

measuring

(1kHz~15kHz)

Caution : High frequency measurement is only for acceleration

measure mode.

F. Measurement :

Depending on the material physical value and vibratory source’s

vibration frequency, select the corresponding measurement mode

(Acceleration/ Velocity/ Displacement) and frequency (HI/ LO),

holding pressed the main unit or sub-unit handle’s “ ” button.

Press the handle sensor head against the surface with 500g~1kg

vertical force, the measuring value will be shown on LCD display,

release the button to lock the value. As shown below picture :

ON/

MEAS

LO 1KHz

mm/s

i68

LO 1KHz

000

Displacement

Velocity

measure

When press “ ” key again, the current locking value will be

cancelled, a new measurement can be preformed.

ON/

MEAS

® ®

G. Maximum value measurement :

After turn on, press “ ” to enter maximum value mode. In

maximum value measuring status, the current vibration data and

the maximum value will display on LCD :

MAX HOLD

LO 1KHz

MAX

HOLD

m/s

0 I8

028

Current

Vibration

value

Maximum

Vibration value

When press “ ” key again, the maximum measure status

will be cancelled, and change to temperature display status.

MAX HOLD

H. Temperature unit change :

During operation, press “ ” to select “ºC” Celsius scale or “ºF”

Fahrenheit scale., as shown below :

ºC/ ºF

LO 1KHz

m/s

000

LO 1KHz

m/s

000

Celsius scale Fahrenheit scale

Caution :

Probe “S” is apply to measure high/low frequency range vibration.

2. Probe “L” is only for low frequency measure, when measuring

acceleration, if the frequency is over 1kHz, please change to

Probe “S” for measurement.

3. When switching measurement mode from acceleration in high

frequency mode to velocity or displacement mode, the unit will

change to low frequency automatically.

4. Auto power-off for 1 minute.

5. LCD backlight will auto-off if there is no further operation in

7 seconds.

I. Vibration conversion chart :

Velocity

(mm/s) rms

Frequency (Hz)

10000

5000

3000

2000

1000

500

300

200

100

0.5

0.3

0.2

0.1

1 2

5 10 20

50 100 200

300

500 1000

3000

2000 5000 10000

-1

-2

-3

-4

-1

-2

5 2

Acceleration 10 m/s -PEAK

Displacement 10 mm

® ®

J. Contact resonance in acceleration measurement :

(Measured with FFT Signal analyzer)

Frequency (Hz)

LO range/ HI range

Without probe

With probe “S”

With probe “L”

Response (db)

-5

-10

-5

-10

-15

-20 200 400 600 800 1K

Frequency (Hz)

LO range/ HI range

Without probe

With probe “S”

With probe “L”

Response (db)

-5

-10

-5

-10

-15

-20 5K 10K 15K 20K 25K

VI. MAINTENANCE :

A. Replacement and upkeep of battery :

1. After power on, if an icon appears on the LCD, you need to

replace the battery immediately, for details please refer figures

and contents on page 9 of this manual.

Remove the battery from the unit if it is not required for extended

period of time in order to avoid damage to the battery

compartment and the erosion resulting from a battery leakage.

®®

WARRANTY

Each “KUSAM-MECO” product is warranted to be free from defects in

material and workmanship under normal use & service. The warranty

period is one year (12 months) and begins from the date of despatch of

goods. In case any defect occurs in functioning of the instrument,

under proper use, within the warranty period, the same will be rectified

by us free of charges, provided the to and fro freight charges are borne

by you.

This warranty extends only to the original buyer or end-user customer

of a “KUSAM-MECO” authorized dealer.

This warranty does not apply for damaged Ic’s, fuses, burnt PCB's,

disposable batteries, carrying case, sensor, damaged cable or to any

product which in “KUSAM-MECO’s” opinion, has been misused,

altered, neglected, contaminated or damaged by accident or abnormal

conditions of operation or handling.

“KUSAM-MECO” authorized dealer shall extend this warranty on new

and unused products to end-user customers only but have no authority

to extend a greater or different warranty on behalf of “KUSAM-MECO”.

“KUSAM-MECO’s” warranty obligation is limited, at option, free of

charge repair, or replacement of a defective product which is returned

to a “KUSAM-MECO” authorized service center within the warranty

period.

THIS WARRANTY IS BUYER’S SOLE AND EXCLUSIVE REMEDY

AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE. “KUSAM-MECO” SHALL NOT BE LIABLE

F O R A N Y S P E C I A L , I N D I R E C T, I N C I D E N TA L O R

CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF

DATA, ARISING FROM ANY CAUSE WHATSOEVER.

All transaction are subject to Mumbai Jurisdiction.

MUMBAI

TEST CERTIFICATE

DIGITAL VIBRATION METER

This Test Certificate warrantees that the product has been

inspected and tested in accordance with the published

specifications.

The instrument has been calibrated by using equipment

which has already been calibrated to standards traceable

to national standards.

MODEL NO. ________________

KM 63A

SERIAL NO. ___________

DATE: ___________

ISO 9001

REGISTERED

PASS

KUSAM-MECO

Inhaltsverzeichnis

Andere Kusam-meco Messgerät Handbücher

Kusam-meco

Kusam-meco KM 088 Bedienungsanleitung

Kusam-meco

Kusam-meco KM 503 Bedienungsanleitung

Kusam-meco

Kusam-meco KM 2008A Bedienungsanleitung

Kusam-meco

Kusam-meco KM 1620 Bedienungsanleitung

Kusam-meco

Kusam-meco KM-6300 Bedienungsanleitung

Kusam-meco

Kusam-meco KM-CAL-804 Bedienungsanleitung

Kusam-meco

Kusam-meco KM 2820EL Bedienungsanleitung

Kusam-meco

Kusam-meco KM 033 Bedienungsanleitung

Kusam-meco

Kusam-meco KM 2234BL Bedienungsanleitung

Kusam-meco

Kusam-meco KM 3060 Bedienungsanleitung

Kusam-meco

Kusam-meco KM-CAL-802 Bedienungsanleitung

Kusam-meco

Kusam-meco KM 086 Bedienungsanleitung

Kusam-meco

Kusam-meco KM 2805 MK-1 Bedienungsanleitung

Kusam-meco

Kusam-meco KM 1120 Bedienungsanleitung

Kusam-meco

Kusam-meco 2718 Bedienungsanleitung

Kusam-meco

Kusam-meco CA 3000 Bedienungsanleitung

Kusam-meco

Kusam-meco 9999 Bedienungsanleitung

Kusam-meco

Kusam-meco 860A Bedienungsanleitung

Kusam-meco

Kusam-meco KM 175D Bedienungsanleitung

Kusam-meco

Kusam-meco 108 Bedienungsanleitung

Kusam-meco

Kusam-meco KM 1001 Bedienungsanleitung

Kusam-meco

Kusam-meco KM 2720 Bedienungsanleitung

Kusam-meco

Kusam-meco KM 061 Bedienungsanleitung

Kusam-meco

Kusam-meco KM 2780 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung