KYLAND Technology KIEN1008G Montageanleitung



KIEN1008G

Industrial Ethernet Switch

Hardware Installation Manual

Kyland Technology Co., LTD.

Publication Date: Oct. 2011

Version: V1.0

Customer Service Hotline: (+8610) 88796676

FAX: (+8610) 88796678

Website: http://www.kyland.cn

E-mail: [email protected]

No.: 1.12.02.1029-0



KIEN1008GIndustrial Ethernet Switch

Hardware Installation Manual

Disclaimer: Kyland Technology Co., Ltd. tries to keep the content in this manual as accurate and

as up-to-date as possible.This document is not guaranteed to be error-free, and we reserve the

right to amend it without notice.

No part of this documentation may be excerpted, reproduced, translated, annotated or duplicated,

in any form or by any means without the prior written permission of KYLAND Corporation.



Notice for Safety Operation

This product performs reliably as long as it is used according to guidelines. Artificial damage or

destruction of the equipment should be avoided.

zRead this manual carefully and keep it for future reference;

zDo not place the equipment near water sources or damp areas;

zDo not place anything on power cable and put the cable in unreachable places;

zDo not tie or wrap the cable to prevent fire.

zPower connectors and other equipment connectors should be firmly interconnected

and checked frequently.

zDo not repair the equipment by yourself, unless it is clearly specified in the manual.

zPlease keep the equipment clean; if necessary, wipe the equipment with soft cotton cloth.

In the following cases, please immediately cut off the power supply and contact our company:

zWater gets into the equipment;

zEquipment damage or shell breakage;

zEquipment operation or performance has abnormally changed;

zThe equipment emits odor, smoke or abnormal noise.



Contents

1. Packing List .......................................................................................................... 5

2. Product Overview ................................................................................................. 5

3. Structure and Interface ......................................................................................... 5

3.1 Front Panel ..................................................................................................... 5

3.2 Top Panel........................................................................................................ 7

4. Mounting............................................................................................................... 7

4.1 Mounting ......................................................................................................... 7

4.2 Mounting Steps............................................................................................... 8

5. Cable Connection ............................................................................................... 11

5.1 10/100/1000Base-T(X).................................................................................. 11

5.2 Combo port ................................................................................................... 12

5.3 Power............................................................................................................ 14

5.4 Grounding ..................................................................................................... 15

6. LED Indicators.................................................................................................... 17

7. Product Models and Accessories........................................................................ 18

8. Basic Features and Specifications...................................................................... 18



1. Packing List

KIEN1008G Industrial Ethernet Switch 1

Hardware Installation Manual 1

CertificateofQuality(includingWarrantyCard) 1

Note: After unpacking, please check the accessories and the appearance of the equipment. If

anything is missing or damaged, please contact us.

2. Product Overview

KIEN1008Gis a series of green, low power consumption, DIN-Rail

industrial Ethernet switch that can be applied extensively in wind power,

distribution network automation, subway PIS, power SCADA, wastewater

treatment, metallurgy, intelligent transportation, rail transit and many other

industries.

KIEN1008G industrial Ethernet switch supports DIN-Rail and panel mounting. It

supports IP40 protection class and provides abundant Gigabit ports.

3. Structure and Interface

3.1 Front Panel

KIEN1008G supports two kinds of product models. The interface is different for

each product model.

zKIEN1008G-2GX/GE-6GE front panel is shown in Figure 1 below



1: PWR1-Power 1 LED

2: PWR2-Power 2 LED

3:Comboport(SFP)Link/ACTLED

4:Combo port(SFP) Speed LED

5:(GX7/GE7、GX8/GE8)-two Combo

ports

6:(GE1-GE6)-six 10/100/1000Base-T(X)

RJ45 ports

7:RJ45port Speed LED

8:RJ45portLink/ACT LED

Figure 1 Front Panel 1

zKIEN1008G-8GE front panel is shown in Figure 2 below

1: PWR1-Power 1 LED

2: PWR2-Power 2 LED

3:(GE1-GE8)-eight 10/100/1000Base-T(X)

RJ45 ports

4:RJ45port Speed LED

5:RJ45portLink/ACT LED

Figure 2 Front Panel 2



3.2 Top Panel

1: Terminal block for power input

2: Screw hole for grounding

Figure 3 Top Panel

4. Mounting

4.1 Mounting

zDimension Drawing for DIN-Rail Mounting (Unit: mm)

Figure 4 DIN-Rail Mounting



zDimension Drawing for Panel Mounting (Unit: mm)

Figure 5 Panel Mounting

4.2 Mounting Steps

zKIEN1008G DIN-Rail Mounting

The specific steps are as follows:

Step 1: Select the mounting position for KIEN1008G and ensure that there is

adequate space.

Step 2: Insert the top of the DIN-Rail into the spring-supported slot of the

DIN-Rail connecting seat in the rear panel of KIEN1008G as seen below;

move the device in the direction of arrow 2 to put the whole Din-Rail into place;

verify the KIEN1008G is firmly mounted on the DIN-Rail, as shown below.

Figure 6 DIN-Rail Mounting



zRemove KIEN1008G from DIN-Rail

The specific steps are as follows:

Step 1: Place the screwdriver into the hole at the bottom of spring locking

plate; press the plate down to loosen the connection of DIN-Rail and switch,

as shown in arrow 1.

Step 2: Pull the KIEN1008G up in the direction of arrow 2; meanwhile remove

the device from the DIN-Rail along the direction of arrow 3.

Figure 7 DIN-Rail Dismounting

zKIEN1008GPanel Mounting

The specific steps are as follows:

Step 1: Select the mounting position for KIEN1008G on the wall or in cabinet;

ensure that there is adequate space for the switch.

Step 2: Drill 4 holes on the selected position according to the panel mounting

dimension drawings; use a cross-screwdriver to screw 4 cross-slot screws

(M3×10) into holes. Don’t tighten the screws completely; leave about 5mm of

space between.

Step 3: Aim 4 mounting holes on KIEN1008G mounting plate at 4 fixed

screws; pass the screws through 4 holes with the diameter of 6.5mm (Ф6.5);

then slide down KIEN1008G as seen below; finally screw 4 screws tightly.



Now the KIEN1008G should be firmly fixed to the wall or cabinet.

Figure 8 Panel Mounting

zRemove KIEN1008G from wall or cabinet

The specific steps are as follows:

Step 1: Use a screwdriver to loosen 4 screws; move the device up to let

screws into 4 holes with the diameter of 6.5mm (Ф6.5).

Step 2: Unscrew the screws from wall or cabinet; remove the device from wall

or cabinet.

Figure 9 Panel Dismounting

Inhaltsverzeichnis

Andere KYLAND Technology Netzwerk-Router Handbücher

KYLAND Technology

KYLAND Technology SICOM2024M-4S/M-24T Montageanleitung

KYLAND Technology

KYLAND Technology SICOM3008PN Montageanleitung

KYLAND Technology

KYLAND Technology KIEN3016A Montageanleitung

KYLAND Technology

KYLAND Technology KIEN3016M Bedienungsanleitung

KYLAND Technology

KYLAND Technology SICOM3000A Series Montageanleitung

KYLAND Technology

KYLAND Technology SICOM3024P Bedienungsanleitung

KYLAND Technology

KYLAND Technology SICOM6000 Series Bedienungsanleitung

KYLAND Technology

KYLAND Technology SICOM3010G Montageanleitung

KYLAND Technology

KYLAND Technology KIEN5000 Bedienungsanleitung

KYLAND Technology

KYLAND Technology SICOM3448G-Port-HV-HV Montageanleitung

KYLAND Technology

KYLAND Technology SICOM3000 Montageanleitung

KYLAND Technology

KYLAND Technology SICOM3024PT-18MB Montageanleitung

KYLAND Technology

KYLAND Technology SICOM3000GPT Montageanleitung

KYLAND Technology

KYLAND Technology SICOM6028GPT Montageanleitung

KYLAND Technology

KYLAND Technology KIEN7009 Series Montageanleitung

KYLAND Technology

KYLAND Technology SICOM3024SM Bedienungsanleitung

KYLAND Technology

KYLAND Technology KIEN1005G Montageanleitung

KYLAND Technology

KYLAND Technology KIEN6000 Bedienungsanleitung

KYLAND Technology

KYLAND Technology SICOM3000 Bedienungsanleitung

KYLAND Technology

KYLAND Technology SICOM3004 Bedienungsanleitung

KYLAND Technology

KYLAND Technology SICOM3016BA-4GX-12S/M Montageanleitung

KYLAND Technology

KYLAND Technology SICOM6000 Series Bedienungsanleitung

KYLAND Technology

KYLAND Technology KIEN1009 Montageanleitung

KYLAND Technology

KYLAND Technology KIEN2204S Montageanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung