KYLAND Technology KIEN2204S Montageanleitung

KIEN2204S Industrial Ethernet Switch

Hardware Installation Manual

Kyland Technology Co., Ltd.

Publication Date: Mar. 2013

Version: V1.0

FAX: +86-10-88796678

Website: http://www.kyland.com

E-mail: [email protected]

No.: 1.12.02.1046-0

KIEN2204S Industrial Ethernet Switch

Hardware Installation Manual

Disclaimer: Kyland Technology Co., Ltd. tries to keep the content of this manual as accurate and

as updated as possible. This document is not guaranteed to be error-free, and we reserve the right

to amend it without notice to users.

No part of this documentation may be excerpted, reproduced, translated, annotated or duplicated,

in any form or by any means without the prior written permission of KYLAND Corporation.

Notice for Safety Operation

The product performs reliably as long as it is used according to the guidance. Artificial damage or

destruction of the device should be avoided. Before using the device, read this notice carefully for

personal and equipment safety. Please keep the manual for further reference. Kyland is not liable to

any personal or equipment damage caused by violation of this notice.

Do not place the device near water sources or damp areas. Keep the ambient relative humidity

within the range from 5% to 95% (non-condensing).

Do not place the device in an environment with high magnetic field, strong shock, or high

temperature. Keep the working and storage temperatures within the allowed range.

Install and place the device securely and firmly.

Please keep the device clean; if necessary, wipe it with a soft cotton cloth.

Do not place any irrelevant materials on the device or cables. Ensure adequate heat dissipation

and tidy cable layout without knots.

Wear antistatic gloves or take other protective measures when operating the device.

Avoid any exposed metal wires because they may be oxidized or electrified.

Install the device in accordance with related national and local regulations.

Before power-on, make sure the power supply is within the allowed range of the device. High

voltage may damage the device.

Power connectors and other connectors should be firmly interconnected.

Do not plug in or out the power supply with wet hands. When the device is powered on, do not

touch the device or any parts with wet hands.

Before operating a device connected to a power cable, remove all jewelry (such as rings,

bracelets, watches, and necklaces) or any other metal objects, because they may cause

electric shock or burns.

Do not operate the device or connect or disconnect cables during an electrical storm.

Use compatible connectors and cables. If you are not sure, contact our sales or technical

support personnel for confirmation.

Do not disassemble the device by yourself. When an anomaly occurs, contact our sales or

technical support personnel.

If any part is lost, contact our sales or technical support personnel to purchase the substitute.

Do not purchase parts from other channels.

Dispose of the device in accordance with relevant national provisions, preventing

environmental pollution.

In the following cases, please immediately shut down your power supply and contact your Kyland

representative:

Water gets into the equipment.

Equipment damage or shell damage.

Equipment operation or performance has abnormally changed.

The equipment emits odor, smoke or abnormal noise.

Contents

1Product Overview ....................................................................................................................1

2Structure and Interface ............................................................................................................2

2.1 Front Panel...........................................................................................................................2

2.2 Top Panel.............................................................................................................................3

3Mounting..................................................................................................................................4

3.1 Dimension Drawing............................................................................................................... 4

3.2 Mounting Modes and Steps..................................................................................................4

3.2.1DIN-Rail Mounting...........................................................................................................5

3.2.2Panel Mounting...............................................................................................................6

4Connection...............................................................................................................................8

4.1 10/100Base-T(X) Ethernet Port ............................................................................................8

4.1.1Functions.........................................................................................................................8

4.1.2Pin Definitions and Wiring Sequence..............................................................................8

4.2 10/100/1000Base-T(X) Ethernet Port ................................................................................. 10

4.3 1000Base-X, 10/100/1000Base-T(X) SFP Slot................................................................... 11

4.3.1Gigabit SFP Optical Module.......................................................................................... 12

4.3.2Gigabit SFP Electrical Module....................................................................................... 13

4.4 1000Base-X, 10/100/1000Base-T(X) Combo Port.............................................................. 13

4.5 Grounding........................................................................................................................... 14

4.6 Power Terminal Block......................................................................................................... 15

5LEDs......................................................................................................................................17

6Basic Features and Specifications.........................................................................................18

Product Overview

1 Product Overview

KIEN2204S includes a series of green low-consumption Power over Ethernet (POE) industrial

Ethernet switches applied in the security, highway monitoring, rail transit, railway disaster

prevention, coal mining operation, industrial production control, and many other industries.

Compatible with 802.3at-compliant Power Devices (PDs), KIEN2204S supports PD power

detection. The series switches support DIN-rail and panel mounting.

KIEN2204S provides two 1000Base-X, 10/100/1000Base-T(X) Combo ports (Combo ports) and

four 10/100Base-T(X) Ethernet ports. The four 10/100Base-T(X) Ethernet ports support 802.3at

POE output. Each POE port provides 30W feed (44-57VDC).

Table 1 KIEN2204S Model

Model

Port

Power Supply

Combo port

10/100Base-T(X) Ethernet

port (802.3at)

KIEN2204S-2GX/GE-4T-4P

48DC (redundant)

Note:

We reserve the right to amend the product information listed in this table without notice. To obtain the

latest information, contact our sales or technical support personnel.

Structure and Interface

2 Structure and Interface

Caution:

It is recommended to purchase the port dustproof shield (optional) to keep ports clean and ensure switch

performance.

2.1 Front Panel

Figure 1 Front Panel of KIEN2204S

Table 2 Description of the Front Panel of KIEN2204S

No.

Identifier

Description

(1)

PWR1

Power 1 LED

(2)

PWR2

Power 2 LED

(3)

Alarm

Alarm LED (for future release)

(4)

GX1, GX2

Gigabit SFP slot connection status LEDs

(5)

GX1, GX2

Two gigabit SFP slots

(6)

GE1, GE2

Two 10/100/1000Base-T(X) Ethernet ports

(7)

10/100/1000Base-T(X) Ethernet port speed LED (yellow)

(8)

10/100/1000Base-T(X) Ethernet port connection status LED (green)

(9)

GX1, GE1

Combo port 1

(10)

GX2, GE2

Combo port 2

Structure and Interface

(11)

1-4

Four 10/100Base-T(X) Ethernet ports

(12)

10/100Base-T(X) Ethernet port speed LED (yellow)

(13)

10/100Base-T(X) Ethernet port connection status LED (green)

(14)

POE, 1-4

POE LED

2.2 Top Panel

Figure 2 Top Panel of KIEN2204S

Table 3 Description of the Top Panel of KIEN2204S

No.

Identifier

Description

(1)

Power terminal block

(2)

Grounding screw

Mounting

3 Mounting

3.1 Dimension Drawing

Figure 3 Dimensions for DIN-Rail Mounting (unit: mm)

Figure 4 Dimensions for Panel Mounting (unit: mm)

Caution:

As part of the heat dissipation system, the switch housing becomes hot during operation. Please use

caution when coming in contact and avoid covering the switch housing when the switch is running.

3.2 Mounting Modes and Steps

The series switches support DIN-rail and panel mounting. Before installation, make sure that the

following requirements are met.

1) Environment: temperature (-40℃to 85℃), ambient relative humidity (5% to 95%,

non-condensing)

2) Power requirement: The power input is within the voltage range of the switch.

3) Grounding resistance: <5

Mounting

4) No direct sunlight, distant from heat source and areas with strong electromagnetic interference.

3.2.1 DIN-Rail Mounting

Mounting

Step 1: Select the mounting position for the device and guarantee adequate space and heat

dissipation (dimensions: 88mm×135mm×137mm).

Step 2: Insert the connecting seat onto the top of the DIN rail, and push the bottom of the device

inward and upward to ensure the DIN rail fits in the connecting seat. Make sure the device

is firmly installed on the DIN rail, as shown in the following figure.

Figure 5 DIN-Rail Mounting

Dismounting

Step 1: Insert the head of a screwdriver into the opening of the spring locking piece at the bottom

from the left. Lift the handle of the screwdriver to open the spring locking piece of the

connecting seat, as shown on the left of the following figure.

Step 2: Move the device in direction 2 until the bottom of the device is detached from the DIN rail.

Then move the device in direction 3 and uplift the device until the top of the connecting seat

is detached from the DIN rail.

Figure 6 DIN-Rail Dismounting

Inhaltsverzeichnis

Andere KYLAND Technology Netzwerk-Router Handbücher

KYLAND Technology

KYLAND Technology KIEN6000 Bedienungsanleitung

KYLAND Technology

KYLAND Technology SICOM3000 Bedienungsanleitung

KYLAND Technology

KYLAND Technology SICOM6000 Series Bedienungsanleitung

KYLAND Technology

KYLAND Technology SICOM3448G-Port-HV-HV Montageanleitung

KYLAND Technology

KYLAND Technology SICOM3000A Series Montageanleitung

KYLAND Technology

KYLAND Technology Opal5GS-1GX4GP-L10-L10 Montageanleitung

KYLAND Technology

KYLAND Technology SICOM3000 Montageanleitung

KYLAND Technology

KYLAND Technology SICOM3024SM Bedienungsanleitung

KYLAND Technology

KYLAND Technology SICOM3008PN Montageanleitung

KYLAND Technology

KYLAND Technology SICOM3010G Montageanleitung

KYLAND Technology

KYLAND Technology SICOM3024P Bedienungsanleitung

KYLAND Technology

KYLAND Technology SICOM3000A Series Montageanleitung

KYLAND Technology

KYLAND Technology KIEN1009 Montageanleitung

KYLAND Technology

KYLAND Technology SICOM3000GPT Montageanleitung

KYLAND Technology

KYLAND Technology KIEN7009 Series Montageanleitung

KYLAND Technology

KYLAND Technology KIEN1008G Montageanleitung

KYLAND Technology

KYLAND Technology SICOM3024PT-18MB Montageanleitung

KYLAND Technology

KYLAND Technology SICOM6000 Series Bedienungsanleitung

KYLAND Technology

KYLAND Technology SICOM2024M-4S/M-24T Montageanleitung

KYLAND Technology

KYLAND Technology SICOM3016BA-4GX-12S/M Montageanleitung

KYLAND Technology

KYLAND Technology KIEN1005G Montageanleitung

KYLAND Technology

KYLAND Technology SICOM6028GPT Montageanleitung

KYLAND Technology

KYLAND Technology KIEN3016M Bedienungsanleitung

KYLAND Technology

KYLAND Technology SICOM3004 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung