Kyocera ECOSYS M3145dn Bedienungsanleitung

Card Authentication Kit (B)

OPERATION GUIDE

PRINT COPY SCAN

ECOSYS M3145dn

PRINT COPY SCAN FAX

ECOSYS M3645dn

Card Authentication Kit (B) Operation Guide

Introduction

Thank you for purchasing our Card Authentication Kit (B).

This product enables you to use the ID card user

authentication system.

Precautions

To install the optional function, you need the License Key.

Please access the designated website of your dealer or

service representative, and register “Machine No.”

indicated on your machine and “Product ID” indicated on

the License Certificate supplied with the product to issue

the License Key.

For ID card reading, refer to the instructions of the card

reader.

For User Login setting and user registration, refer to User

Authentication and Accounting (User Login, Job

Accounting) in the Operation Guide of the machine.

To make local authentication using your ID card, you need

to register the ID card information in the Local User List you

are pre-registered on. For registration procedure, refer to

the To register the ID card information.

To make network authentication using your ID card, you

need to install the KYOCERA Net Manager on the network

authentication server. Register the user from the server and

enter the ID card's ID number. Refer to the KYOCERA Net

Manager Install Manual for details.

Activation of Card Authentication Kit(B)

Activate the ID CARD from the operation panel on the

machine.

1 Press the System Menu/Counter key.

2 Press the ▲or ▼key to select [System/Network] and

then press the OK key.

NOTE:If User Login is set to Off, the Login screen appears.

Refer to the procedure of Key Login, and login using the

privileges.

3 Press the ▲or ▼key to select [Op Functions] and

then press the OK key.

4 Press the ▲or ▼key to select [ID CARD] and then

press the OK key.

5 Press the ▲or ▼key to select [Official] and then press

the OK key.

NOTE:To use the application as a trial, select [Trial] without

entering the license key.

6 Enter the Licence Key using the numeric keys and then

press the OK key.

7 When the confirmation screen appears, press [Yes]

(Left Select key).

Setting User Login

Make the settings of Local Authentic. or Netwk Authentic. in

User/Job Accounting on the machine.

NOTE:For User Login setting, refer to the Operation Guide

of the machine.

When you enable User Login on the machine, you need to

make the setting of user account for the printer driver in

order to print by the computer. For details, refer to the

Printer Driver User Guide, Device Settings, and

Administrator Settings.

Registering/deleting the ID card

information

The procedures below are to register or delete the card

information of a pre-registered user.

For new registration or change of user information on Local

User List, refer to the Operation Guide of the machine.

To register the ID card information

To login using the ID card, you need to register the ID card

information in the user information.

Follow the steps below.

1 Press the System Menu/Counter key.

NOTE:If Local Authentic. has been set in User Login, the

Use ID card to login. screen appears. Refer to Login or the

procedure of Key Login, and login using the ID card

registered with administrator privileges or using the login

user name.

To enter your login user name and login password, refer to

the machine's Operation Guide.

2Pressthe▲or ▼key to select [User/Job Account] and

then press the OK key.

NOTE:If User Login is disabled, the Use ID card to login.

screen appears. Refer to Login or the procedure of Key

administrator privileges or using the login user name.

To enter your login user name and login password, refer to

the machine's Operation Guide.

3 Press the ▲or ▼key to select [User Login Set.] and

then press the OK key.

4 Press the ▲or ▼key to select [Local User List.] and

then press the OK key.

5 Press the ▲or ▼key to select the user from User

6 Press the ▲or ▼key to select [ID Card Info.] and then

press [Change] (Right Select key).

7 Press the ▲or ▼key to select [Read] and then press

the OK key.

8 Hold the ID card to be registered over the card reader ,

and press [Read] (Right Select key). When

Registered. appears on the screen, and then returns to

the Detail menu.

9 In the Detail menu, press the OK key. The confirmation

screen appears.

10 Press [Yes] (Left Select key). The user information is

changed. When Registered. appears on the screen, the

ID card information is now registered.

To delete the ID card information

You can delete the ID card information registered in the

user information.

Follow the steps below.

1 Perform the step 1 to 6 of To register the ID card

information.

2 Press the ▲or ▼key to select [Delete].

3 In the confirmation screen, press [Yes] (Left Select

key). When Completed. appears on the screen, and

then returns to the Detail menu.

4 In the Detail menu, press the OK key. The confirmation

screen appears.

5 Press [Yes] (Left Select key). The user information is

changed. When Registered. appears on the screen, the

ID card information is now deleted.

Connecting the USB cable

Connect the USB cable of ID card reader to the USB

memory slot on the machine.

After installing the Card Authentication Kit (B) and setting

User Login, Use ID card to login. will appear when you use

the machine.

To login, hold the ID card over the ID Card Reader.

Caution: To read an ID card, bring the card within 10 mm of

the ID card reader.

Do not attempt to read two ID cards at once.

NOTE: When Additional Authentication is set to Use

Password, the Login Password is entered after

authentication using the ID card. For the setting procedure,

refer to Additional Authentication.

Key Login

You can login by entering the login user name and login

password without using the ID card.

NOTE: You can make the login permission or prohibition

setting. For the setting procedure, refer to Key Login

setting.

Follow the steps below.

1 Press the [KeyLogin] (Left Select key) in the ID card

2 Enter the login user name and password, and then

press [Login] (Right Select key).

NOTE:Refer to the Operation Guide of the printer for details

on entering characters.

To return to the Use ID card to login. screen, press [Menu]

(Left Select key) and press the ▼key to select [ID Card

Logout

After completing the procedure, press the Logout key on

the control panel.

Key Login setting

You can make the Key Login permission or prohibition

setting.

Follow the steps below.

1 Press the System Menu/Counter key.

NOTE:If Netwk Authentic. has been set in User Login,the

Use ID card to login. screen appears. Refer to Login or the

procedure of Key Login, and login using the ID card

registered with administrator privileges or using the login

user name.

2 Press the ▲or ▼key to select [User/Job Account] and

then press the OK key.

NOTE:If User Login is set to Off, the Use ID card to login.

screen appears. Refer to the procedure of Key Login, and

administrator privileges.

3 Press the ▲or ▼key to select [User Login Set.] and

then press the OK key.

4 Press the ▲or ▼key to select [ID Card Settings] and

then press the OK key.

5 Press the ▲or ▼key to select [Key Login] and then

press the OK key.

6 Press the ▲or ▼key to select [Permit] or [Prohibit]

and then press the OK key.

Additional Authentication

This sets whether or not to require the entry of a Login

Password after authentication using an ID card. When set

to Use Password, the Login Password entry screen is

displayed after the ID card is authenticated.

Follow the steps below.

1 Perform the step 1 to 4 of Key Login setting.

2 Press the ▲or ▼key select [Additional Auth.] and then

press the OK key.

3 Press the ▲or ▼key select [Off], [Use Password] or

[Use PIN] and then press the OK key.

NOTE:To use PIN code authentication, you must enable

network authentication and set the server type to [Ext.].

For details, refer to the machine's Operation Guide.

Responding to Error Messages

If the panel displays any of these message, follow the

corresponding procedure.

Error Message Corrective Actions

Cannot recognize. Make sure your ID card has been

registered.

This ID card is

already registered.

Your ID card has already been

registered. Change it to another ID

card.

Cannot read data in

this ID card.

In registration process, the ID card

information was not read correctly. Hold

again the ID card over the ID card

reading part.

If the same message still appears, the

ID card may not be compatible with this

product. Change it to another ID card.

First edition 2018.2

3MT2TGKDEN0

Andere Handbücher für ECOSYS M3145dn

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kyocera Multifunktionsdrucker Handbücher

Kyocera

Kyocera ECOSYS M2835dw Bedienungsanleitung

Kyocera

Kyocera FS FS-C8500DN Bedienungsanleitung

Kyocera

Kyocera KM-2540 Bedienungsanleitung

Kyocera

Kyocera TASKalfa 8001i Bedienungsanleitung

Kyocera

Kyocera TASKalfa 181 Bedienungsanleitung

Kyocera

Kyocera TASKalfa 255 Bedienungsanleitung

Kyocera

Kyocera PF-750 Bedienungsanleitung

Kyocera

Kyocera KM-C850 Bedienungsanleitung

Kyocera

Kyocera ECOSYS M6535cidn Bedienungsanleitung

Kyocera

Kyocera ECOSYS M4132idn Installations- und Betriebsanleitung

Kyocera

Kyocera FS-3040MFP Installations- und Betriebsanleitung

Kyocera

Kyocera FS-1100 Bedienungsanleitung

Kyocera

Kyocera TASKALFA 300I Bedienungsanleitung

Kyocera

Kyocera TASKalfa 3051ci Bedienungsanleitung

Kyocera

Kyocera TASKalfa 1801 Bedienungsanleitung

Kyocera

Kyocera FS-1100 Handbuch

Kyocera

Kyocera KM-C850 Einrichtungshandbuch

Kyocera

Kyocera AD-63 Bedienungsanleitung

Kyocera

Kyocera KM-5050 Bedienungsanleitung

Kyocera

Kyocera TASKalfa 620 Bedienungsanleitung

Kyocera

Kyocera TASKalfa 205c Bedienungsanleitung

Kyocera

Kyocera FS-C1020MFP Bedienungsanleitung

Kyocera

Kyocera FS-2020D Bedienungsanleitung

Kyocera

Kyocera 508ci Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 558 Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung