Labino MB Poseiodon L111 Bedienungsanleitung

MB Poseiodon

Blue Light

OPERATING INSTRUCTIONS

CONTENTS

1. LABINO THE COMPANY 3

2. MODELS AVAILABLE IN MB POSEIDON 4

3. UNPACKING THE EQUIPMENT 4

4. TRANSPORTATION OF THE EQUIPMENT 5

5. HANDLING OF THE EQUIPMENT / INTENDED USE 5

6. SERVICE AND OPERATING INSTRUCTIONS 6

7. TECHNICAL DATA 8

8. STORAGE AND DISPOSAL 8

9. WARNING AND SAFETY 9

10. WARRANTY 10

11. DECLARATION OF CONFORMITY 12

12. LABINO AB QUALITY DECLARATION 15

Rev. A, April 2018

1. LABINO THE COMPANY

Labino AB is a Swedish-American, family owned company dedicated to the

development and manufacture of UV lamps since 1994. Since its inception,

Labino AB has been committed to high standards of quality in the design and

manufacture of new innovative products, helping NDT professionals worldwide to

make the world a safer place. Labino AB high quality lights are designed to comply

with all relevant international and ASTM standards, and are distributed to over 55

countries worldwide.

Labino AB lights are used in multiple applications, industrial as well as

non-industrial such as Nondestructive Testing, Medical Laboratories, Crime

Laboratories, Forensics, UV Curing, Leak Detection and others. We are very

condent you will enjoy using our new generation of lights that are much lighter

and more compact than many comparable products on the market today, but

with even more power and higher safety standards. Labino remains committed to

environmentally friendly technologies and materials.

Labino is a proud member of:

ASTM ISO Nadcap ASNT

2. MODELS AVAILABLE OF MB POSEIDON

e model and serial number of your specic Labino lamp is found at

the mark plate on the top of the head of your lamp. MB Poseidon is available as

A/C (mains) operated as well as battery operated version.

MAINS OPERATED LIGHTS BATTERY OPERATED LIGHTS

MB Poseidon Mains MB Poseidon Battery

P/N : L111 P/N: L110

MB Poseidon generates an intensity of approximately8 500μW/cm2

(at 38 cm or 15 inches) with a beam diameter of 23 cm2(9 in) with intensity

>1200μW/cm2at 38 cm distance. Battery lifetime is approx. 2.5 hours. e lamp

oers a beam that is extremely homogenous – without any footprints showing

from the LEDs, shades, dark spots or other disturbing defects in the beam.

For information about spare parts and accessories, please visit www.labino.com

3. UNPACKING THE EQUIPMENT

Check that the lamp has not been damaged during transport. In the event of

external damage to the PACKAGE, do not accept the package from the freight

company.

In the event of external damage to the PRODUCT, please contact the supplier

without testing whether the lamp works.

Make sure that no part is missing. If a part is missing, contact your supplier.

4. TRANSPORTATION OF THE EQUIPMENT

Warning! Shipping of batteries:

Make sure you ship all products including lithium batteries

according to IATA Dangerous Goods Regulations (DGR). DO

NOT ship broken lithium batteries. Broken batteries shall be

disposed in accordance with local waste disposal regulations.

5. HANDLING OF THE EQUIPMENT / INTENDED USE

Although the lamp is very sturdy, in view of the extensive electronic equipment it

contains, it should nevertheless be treated with a certain amount of care.

e lamp can be switched on and o at any interval.

Waterproof

Tested waterproof classication “IP68 1.1 m, 31 min”, means that the lamp can

withstand water from above without any harmful side-eects. It can be held up to

1.1 meter under water, for up to 31 minutes.

Cleaning – do not disassemble unit for cleaning

Exterior surfaces should be cleaned with a so lint free cloth and mild detergent.

Isopropanol and a microber cloth shall be used to perform the cleaning of the

lters. Disassembly voids warranty.

Temperature

Make sure the unit has good ventilation. Do not mount the unit at a closed

compartment and do not cover any part of the unit. e unit is cooled by

convection to surrounding air, remove all obstacles for ecient convection.

Maximum ambient temperature is 40° C (104° F).

Intended use

Intended use of the equipment is to inspect an object by irradiating the surface

with blue light emitted from the light source (MB Poseidon). e light is specially

designed to perform Non Destructive Testing.

e user should always wear Yellow contrast goggles supplied with the

equipment.

6. SERVICE AND OPERATING INSTRUCTIONS

FUNCTIONAL DESCRIPTION

Standard versions:

• Position 1: Blue radiation – Press the switch to activate.

• Position 2: O position – Press the switch a second time to deactivate the lamp.

MAINS OPERATED UNIT

• e external PSU may not be used for purposes/products other than those

prescribed by Labino.

• e external PSU is built for operation from mains (AC). During the

connecting and disconnecting procedure of the PSU, the lamp has to be shut-

o. Aer this procedure, the lamp can be operated as usual.

Mounting:

1. Dry environment: Connect the PSU in a dry location. Mind heat dissipation of

the PSU.

2. Connect: Connect mains cable to mains outlet.

3. Green light: When connected, the LED indicator lights green.

BATTERY OPERATED UNIT

• e Battery must not be used for purposes/products other than those

prescribed by Labino. Battery must not be charged with any charger not

supplied by Labino.

• Voltage: 3.6 V

• Capacity: 3 400 mAh

• Two batteries are required to operate the lamp.

Mounting:

1. Mount the batteries in the handle.

2. Open lid for battery slot by unscrewing the two screws holding the lid.

3. Batteries slides into slot. Mind polarity of batteries.

4. Mount lid by screwing it back on to handle.

Battery indicator:

Four colors indicates the status of the battery:

a. Green: over 75 % charged

b.Yellow: 50-75 % charged

c. Orange: 25-50 % charged

d. Red: 10-25 % charged

e. Red blinking: less than 10% charged

MB Poseidon can be used also while the batteries are charging. e LED indicator

shows than the staus of the charging (yellow or green).

Charging by connecting the Power Supply Unit to MB Poseidon:

1. Dry environment: Connect the external PSU in a dry location. Mind heat

dissipation of the PSU.

2. Connect the external Power Supply Unit to the connector in the back of the MB

Poseidon head.

3. Connect mains cable to mains outlet.

4. LED indicator: Shows yellow for charging and changes

to green when the batteries are fully charged.

Charging the batteries in the external battery charger:

1. Dismount batteries by unscrewing the lid on the

handle.

2. Remove batteries from slot.

3. Connect AC adapter to mains outlet.

4. Connect AC adapter circular DC jack to the charger

5. Observe battery polarity when inserting the batteries

into the charger. Misplacement of the batteries in the

charger can damage the charger.

6. Place battery in charging dock and make a gentle push.

7. TECHNICAL DATA

Weight Mains operated:

• 702 gr (8.76 oz)

Battery operated:

• without battery: 688 gr (8.27 oz)

• with battery: 781 gr (11.55 oz)

PSU for AC (Mains) version Mains voltage PSU: 100–240 V 50/60 Hz

Output voltage: 11.5 V DC / 3A/40W

Operation status LED: Green

Charger for Battery version Mains voltage PSU: 100–240 V 50/60 Hz

Output voltage: 11.5 V DC / 3A/40W

Operation status LED: Green

Battery 2 x 3.6 VDC

Operating time ≈ 2.5 hrs

Charging time Usage of the external charger charges the batteries fully

within 8 hours.

Usage of the internal charger (via a connector at the

back of the unit) charges the batteries fully within 4

hours.

Irradiation at distance of 15"

(380 mm)

Center ≈ 6 500 µW/cm²

Peak wavelength 440 nm +/- 5 nm

8. STORAGE AND DISPOSAL

• Store MB Poseidon and extra batteries in a dry and cool environment (below

30˚C).

• Store and handle batteries with care, keep away conductive objects that can

short cut batteries.

• Do not dispose battery in re or water.

• Consumed batteries shall be recycled at local waste disposal sites.

9. WARNING AND SAFETY

General Irradiation Safety Information

Blue light can cause burn injuries on your eyes. e exposure to light should be

considered with care.

Unprotected and prolonged exposure to high intensities of blue light might

result in skin injuries. Even brief exposure can be hazardous if the eyes are

exposed directly to blue light.

Blue light is Dangerous – Protect yourself!

It is advised to always shield the eyes/face. For maximum protection and whenever

possible hands and arms should also be covered with long sleeves and gloves of a

non-uorescent material.

• Yellow goggles: It is of utter importance to use the protection. To protect eyes –

use Yellow Goggles.

• Gloves: Be sure to use gloves that protect you not only from chemicals or cuts,

but from radiation. And make sure that they do not uoresce.

Sensitivity

Certain individuals are naturally hypersensitive to all forms of light and should

avoid any exposure. In general, if itching, inammation or other unusual

symptoms occur, exposure should cease immediately. People using certain drugs

that produce photosensitivity should avoid exposure to all blue light sources.

Heat

e unit generates heat that needs to dissipate though convection. Do not cover

unit when operating.

Battery Safety!

Never charge the battery with any other charger than the original charger that

comes with delivery. Usage of a non-Labino battery can cause serious damage to

the user and the lamp.

Warning! Shipping of batteries. Make sure you ship all

products including lithium batteries according to IATA

Dangerous Goods Regulations (DGR). DO NOT ship broken

lithium batteries. Broken batteries shall be disposed in

accordance with local waste disposal regulations.

10. WARRANTY

Labino AB guaranties that the armatures will be free from defects in manufacture

when delivered. Labino AB’s obligation under this warranty is limited to repairing

or replacing, at the option of Labino AB, any part(s) of the product which, if

properly installed, used and maintained, proves upon factory examination to

have been defective in material or workmanship. is warranty does not apply

to any product or part which (1) is normally consumed in operation or (2) has a

normal life inherently shorter than the stated warranty. In no event shall Labino

AB be liable for special, indirect, incidental or consequential damages, nor for any

damages arising out of delay in shipment or production.

Warranty for a brand new MB Poseidon lamp

• e warranty for a brandnew MB Poseidon lamp is twelve (12) months from

the date of purchase.

• An invoice that shows the actual date of when the lamp was purchased, as well

as the serial number of the actual unit, must be enclosed in the shipment in

order to be able to claim the warranty. If the invoice is not enclosed, Labino will

base the warranty period on the delivery date from Labino to the distributor.

Warranty for a repaired MB Poseidon lamp

• e warranty for MB Poseidon lamp repaired by Labino’s in-house service

center or an authorized Labino service center is three (3) months from the date

it is shipped from Labino’s in-house service center or an authorized Labino

service center, unless the initial warranty is still in force.

Warranty for Labino Spare Parts

• Labino MB Poseidon lamps have essentially one consumable part that

may need to be replaced aer long-term usage: Lithium Ion batteries loses

approximately 20 % performance aer 500 charge cycles.

• Batteries have a warranty of three (3) months.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Labino Messgerät Handbücher

Labino

Labino Apollo 1.0 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung