LaCie 2big Quadra USB 3.0 Bedienungsanleitung

2big NAS User Manual 1

2BIG NAS USER MANUAL

CLICK HERE TO ACCESS UP-TO-DATE ONLINE VERSION

of this document for the most recent content as well as for features such as expandable

illustrations, easier navigation, and search capability.

2big NAS User Manual 2

INTRODUCTION

Congratulations on your purchase of a LaCie 2big NAS. Designed to satisfy the data sharing

and backup needs of small offices, your LaCie NAS (network-attached storage device)

represents the new generation of shared storage with security.

This manual will guide you through the process of connecting the NAS to your network and will assist you in

troubleshooting any issues that might arise. If you encounter problems, check Getting Help. Note that most of

the problems users encounter can be resolved by resetting the product to factory conditions (see Support).

BOX CONTENT

Ethernet cable

■

Power supply

■

Utilities CD-ROM with software and User Manual

■

Drive stand for upright use

■

Disk drawer key

■

Important info: Please save your packaging. In the event that the drive should need to be repaired or

serviced, it must be returned in its original packaging.

MINIMUM SYSTEM REQUIREMENTS

Computer with an Ethernet network adapter

■

Latest version of Windows® XP, Windows Vista®, Windows Vista 64-bit, Windows 7 / Mac® OS X 10.5, 10.6,

■

10.7 / Linux 2.6

Minimum free disk space: 600MB recommended

■

Ethernet switch or router

■

Web browsers: Internet Explorer™ 7.0 / 8.0 Firefox™ 3.0, Safari™ 3.0, or Chrome 2.0 or higher

■

Important info:

Your LaCie product's performance can be affected by such external forces as network activity, hardware,

distance, and setup.

For optimal performance, use a Gigabit Ethernet router and a Gigabit Ethernet board in your host computer.

2big NAS User Manual 3

VIEWS OF THE PRODUCT

FRONT VIEW

Front LED button: The front LED button provides feedback on your 2big (unless you turn it off using the1.

Dashboard, the administration tool) and can also be configured to put wake or put the product to sleep. For

details, see below and Eco Management.

2big NAS User Manual 4

REAR VIEW

Left drive status LED1.

ON/OFF2.

Gigabit Ethernet3.

USB 2.0 expansion4.

eSATA expansion5.

Right drive status LED6.

Drive tray handle7.

Drive lock8.

Power connector9.

FRONT BUTTON FUNCTIONS

The multi-function front LED/button allows you to activate/deactivate sleep mode and reset to default.

Activate deep sleep mode: If Deep Sleep Mode is enabled in Dashboard - Eco Management, click the

■

blue button.

Wake from sleep mode: Press the blue button.

■

To wake the drive from Deep Sleep Mode, press the blue button or use the Wake on LAN function in the LaCie

Network Assistant (see Wake on LAN (WOL)) (see also Eco Management).

Reset to default: This process is explained in Reset to Factory Conditions.

■

2big NAS User Manual 5

LED BEHAVIOR

The front and rear LEDs indicate drive status and activity. This section describes the behavior of the LED

indicators. Note that even if you have turned off the front LED using the Dashboard, events triggering a red light

will always cause the front LED to turn on.

Front LED

Color Rear LED Color State

Blinking blue Activity LED for working disk(s)

(until they are fully initialized) Occurs as the device is booting; will cease once the

drives are fully initialized

Solid blue Activity LED for working disk(s)

Drive working (read/write)

Blinking

blue/red

Blinking blue/red

RAID synchronizing; will cease once operation has

concluded

Activity LED for working disk(s)

Operating system update in progress

Blinking red

Activity LED for working disk(s)

RAID is degraded; data is intact but no longer

protected from further failed disks

Solid red for non-functional disk(s)

Activity LED Temperature alert (first level)

Fan is not spinning

Power supply has been cut but power is still being

supplied through the UPS

Solid red

Activity LED for working disk(s) Temperature alert (critic level) – the product will shut

off

Power supply has been cut and the UPS has run out of

reserve power – the product will shut off

Solid red for non-functional disk(s)

RAID has failed and data has been lost

Off in disconnected disk(s) Disk(s) is/are disconnected

2big NAS User Manual 6

2big NAS User Manual 7

HARD DISK HEAT MANAGEMENT

HEAT DISSIPATION DESIGN

This LaCie product's metal body is ideal for naturally dissipating internal drive heat. Its unique design actually

draws heat away from the internal drive toward the external casing. The large surface area of the heat sink

casing absorbs internal heat and dissipates it, keeping the drive safe and prolonging its life and reliability.

As a consequence, it is normal that the external casing is warm to the touch. Please make sure that

the vent on the back bezel is not obstructed and that there is a natural airflow across the casing.

UPRIGHT, STACK & RACKMOUNT CONFIGURATION

Heat dissipation is maximized when this LaCie product is in the upright position. When stacking LaCie products,

please remember to attach the included rubber feet (if included) on the under side of your drives. This will allow

for some airflow between your drives so that the heat dissipation can work effectively. LaCie does not

recommend stacking or racking more than two drives on top of each other, especially if these drives are turned

on simultaneously.

2big NAS User Manual 8

CONNECT TO THE NETWORK

This chapter explains how to connect your LaCie NAS to a network.

Important Info: If your 2big NAS did not include disks, you must install and initialize them before following

the steps below. See Adding Disks to an Empty Enclosure for details.

A - CONNECT THE ETHERNET CABLE

Connect the Ethernet cable to the Ethernet port on the back of the product.1.

Connect the other end of the Ethernet cable into an available Ethernet “out” port on your router or hub (refer2.

to your router or hub’s documentation if necessary).

2big NAS User Manual 9

B - CONNECT THE POWER SUPPLY

Connect the power supply to a wall outlet and to the product.1.

Turn on the drive by pressing the power button on the back of the drive. The front LED will turn on and then2.

begin blinking.

Caution: Only use the AC adapter supplied with your specific LaCie device. Do not use a power supply from

another LaCie device or another manufacturer. Using any other power cable or power supply may cause

damage to the device and void your warranty. Always remove the AC adapter before transporting your LaCie

device. Failure to remove the adapter may result in damage and will void your warranty.

The device is ready to be accessed once the blue LED has stopped blinking. The product may take up to 3

minutes to boot.

2big NAS User Manual 10

C - INSTALL LACIE NETWORK ASSISTANT

LaCie Network Assistant detects all LaCie network-attached storage devices on your network and gives you easy

ways to connect to or configure them.

Note: If you've installed LaCie Network Assistant before purchasing this LaCie product, make sure that

you've downloaded and installed the latest version from the LaCie website.

Insert the Utilities CD-ROM into your computer's CD-ROM drive.1.

Windows users, the CD should appear in My Computer or Computer. Mac users, the CD should appear on2.

the Desktop. Double-click the CD icon, then double-click LaCie Network Assistant Setup.

Follow the Wizard to complete installation.3.

Note: After you finish step C, move on to Access and Transfer Files or Dashboard (Administration).

Andere Handbücher für 2big Quadra USB 3.0

Inhaltsverzeichnis

Andere LaCie Netzwerkspeicherserver Handbücher

LaCie

LaCie 5big - Network NAS Server Bedienungsanleitung

LaCie

LaCie 301160U - 1TB Ethernet Disk RAID Network Attached... Bedienungsanleitung

LaCie

LaCie 12big Rack Fibre 8 Referenzhandbuch

LaCie

LaCie 8BIG RACK THUNDERBOLT 2 Bedienungsanleitung

LaCie

LaCie 301420U - 2big Network NAS Server Bedienungsanleitung

LaCie

LaCie 5BIG NAS PRO Bedienungsanleitung

LaCie

LaCie 301421U - 2big Network NAS Server Bedienungsanleitung

LaCie

LaCie 2big Network 2 Bedienungsanleitung

LaCie

LaCie 2big NAS Bedienungsanleitung

LaCie

LaCie 301423U - 2big Network NAS Server Bedienungsanleitung

LaCie

LaCie 301414U - d2 Network NAS Server Bedienungsanleitung

LaCie

LaCie 301417U - Big Disk Network NAS Server Bedienungsanleitung

LaCie

LaCie 301258U - 2big Network NAS Server Bedienungsanleitung

LaCie

LaCie 301346U - Big Disk Network NAS Server Bedienungsanleitung

LaCie

LaCie 5big Network 2 Bedienungsanleitung

LaCie

LaCie 301300U - Ethernet Disk NAS Server Bedienungsanleitung

LaCie

LaCie 12big Rack Fibre 8 Bedienungsanleitung

LaCie

LaCie 2big Network 2 Bedienungsanleitung

LaCie

LaCie ICA-312 Bedienungsanleitung

LaCie

LaCie 301507U Bedienungsanleitung

LaCie

LaCie 5big - Network NAS Server Bedienungsanleitung

LaCie

LaCie 2big Network 2 Bedienungsanleitung

LaCie

LaCie 5big - Network NAS Server Bedienungsanleitung

LaCie

LaCie 12big Rack Fibre 8 Referenzhandbuch

Beliebte Netzwerkspeicherserver Handbücher anderer Marken

HP NetStorage 6000 Bedienungsanleitung

Synology

Synology RackStation RS816 Handbuch

D-Link

D-Link ShareCenter Pro DNS-1200-05 Bedienungsanleitung

Avid Technology

Avid Technology VideoRAID ST Sicherheitsleitfaden

Western Digital

Western Digital My Cloud Home Duo Bedienungsanleitung

PrimeArray

PrimeArray 4xxx Bedienungsanleitung

Buffalo

Buffalo TeraStation WSS WSH5010N6 Bedienungsanleitung

Planex

Planex MZK-NAS01SG Bedienungsanleitung

Intel

Intel SS4000-E - Entry Storage System NAS Server Bedienungsanleitung

Synology

Synology RS2212+ Bedienungsanleitung

Allnet

Allnet ALL69000 Bedienungsanleitung

Adaptec

Adaptec 5325301580 Bedienungsanleitung

Motorola

Motorola EXORdisk II Bedienungsanleitung

Sony

Sony XDAAI1PK Bedienungsanleitung

Cisco

Cisco Linksys NAS200 Original Betriebsanleitung

Sans Digital

Sans Digital MR4UT6G Bedienungsanleitung

AIC

AIC FB128-LX Bedienungsanleitung

Dell

Dell PowerVault NX3500 Gebrauchsanweisung