Lantronix XPort Direct+ Bedienungsanleitung

Part No. 900-523

Revision A October 2007

XPort Direct+

User Guide

XPort Direct+ User Guide 2

be transmitted or reproduced in any form or by any means without the written

permission of Lantronix. Printed in the United States of America.

XPort Direct+, with its patent-pending technology, is a trademark of Lantronix.

Ethernet is a trademark of XEROX Corporation. UNIX is a registered trademark of

The Open Group. Windows 95, Windows 98, Windows 2000, Windows NT, and

Windows XP are trademarks of Microsoft Corp. Netscape is a trademark of Netscape

Communications Corporation.

Contacts

Lantronix Corporate Headquarters

15353 Barranca Parkway

Irvine, CA 92618, USA

Phone: 949-453-3990

Fax: 949-453-3995

Technical Support

Online: www.lantronix.com/support

Sales Offices

For a current list of our domestic and international sales offices, go to the Lantronix

web site at www.lantronix.com/about/contact

Contents

XPort Direct+ User Guide 3

Disclaimer and Revisions

Operation of this equipment in a residential area is likely to cause interference, in

which case the user, at his or her own expense, will be required to take whatever

measures may be required to correct the interference.

Changes or modifications to this device not explicitly approved by Lantronix will void

the user's authority to operate this device.

Date Rev. Firmware Comments

10/07 A Initial release

XPort Direct+ User Guide 4

Contents

Contacts __________________________________________________________ 2

Disclaimer and Revisions _____________________________________________ 3

1: About This Guide 8

Purpose and Audience _______________________________________________ 8

Chapter Summary ___________________________________________________ 8

Additional Documentation _____________________________________________ 9

2: Introduction 10

Capabilities _______________________________________________________ 10

Applications _______________________________________________________ 10

Protocol Support ___________________________________________________ 11

Addresses and Port Numbers _________________________________________ 11

Hardware Address ______________________________________________________ 11

IP Address_____________________________________________________________ 11

Port Numbers __________________________________________________________ 11

Configuration Methods ______________________________________________ 12

3: Using DeviceInstaller 13

Installing DeviceInstaller _____________________________________________ 13

Assigning an IP Address _____________________________________________ 13

Accessing the XPort Direct+ Using DeviceInstaller _________________________ 14

Viewing the Current Configuration______________________________________ 14

4: Configuration Using Web Manager 17

Accessing XPort Direct+ Using DeviceInstaller ____________________________ 17

Network Configuration _______________________________________________ 19

Network Mode __________________________________________________________ 19

Automatic IP Address Configuration _________________________________________ 19

Static IP Address Configuration ____________________________________________ 20

Ethernet Configuration ___________________________________________________ 20

Server Configuration ________________________________________________ 21

Host List Configuration ______________________________________________ 22

Channel 1 Configuration _____________________________________________ 23

Serial Settings __________________________________________________________ 23

Connection Settings - TCP ________________________________________________ 26

Contents

XPort Direct+ User Guide 5

Connection Settings - UDP ________________________________________________ 28

Email Settings _____________________________________________________ 30

Trigger Configuration ____________________________________________________ 30

Configurable Pin Settings ____________________________________________ 32

Apply Settings _____________________________________________________ 33

Apply Factory Defaults ______________________________________________ 33

5: Configuration via Telnet or Serial Port (Setup Mode) 34

Accessing Setup Mode ______________________________________________ 34

Telnet Connection _______________________________________________________ 34

Serial Port Connection ___________________________________________________ 35

Exiting Setup Mode _________________________________________________ 36

6: Setup Mode: Server Configuration 37

Server Configuration (Option 0)________________________________________ 37

IP Address________________________________________________________ 37

Set Gateway IP Address _____________________________________________ 38

Netmask: Number of Bits for Host Part __________________________________ 38

Change Telnet Configuration Password _________________________________ 38

DHCP Name ______________________________________________________ 38

7: Setup Mode: Channel Configuration 40

Channel 1 (Option 1) ________________________________________________ 40

Baudrate _________________________________________________________ 41

I/F (Interface) Mode _________________________________________________ 41

Flow_____________________________________________________________ 42

Port Number ______________________________________________________ 42

Connect Mode _____________________________________________________ 43

a) Incoming Connection __________________________________________________ 44

b) Response ___________________________________________________________ 44

c) Active Startup ________________________________________________________ 44

d) Datagram Type _______________________________________________________ 47

e) Modem Mode ________________________________________________________ 47

Send the Escape Sequence (+++) in Modem Mode ________________________ 49

Show IP addr after 'RING' ____________________________________________ 49

Auto Increment Source Port __________________________________________ 50

Remote IP Address _________________________________________________ 50

Remote Port ______________________________________________________ 50

DisConnMode _____________________________________________________ 50

Flush Mode (Buffer Flushing) _________________________________________ 51

Contents

XPort Direct+ User Guide 6

Pack Control ______________________________________________________ 52

Packing Interval_________________________________________________________ 52

Trailing Characters ______________________________________________________ 52

Send Characters ________________________________________________________ 53

DisConnTime (Inactivity Timeout) ______________________________________ 53

Send Characters ___________________________________________________ 53

Telnet Terminal Type________________________________________________ 53

Channel (Port) Password ____________________________________________ 53

8: Setup Mode: Advanced Settings 54

Email Settings (Option 3)_____________________________________________ 54

Mail Server ____________________________________________________________ 55

Unit Name _____________________________________________________________ 55

Domain Name __________________________________________________________ 55

Recipient 1 ____________________________________________________________ 55

Recipient 2 ____________________________________________________________ 55

Trigger 1 ______________________________________________________________ 55

Trigger 2 ______________________________________________________________ 56

Trigger 3 ______________________________________________________________ 56

Expert Settings (Option 5) ____________________________________________ 56

TCP Keepalive time in seconds ____________________________________________ 57

ARP Cache timeout in seconds ____________________________________________ 57

CPU Performance _______________________________________________________ 57

Disable Monitor Mode at bootup ____________________________________________ 58

HTTP Port Number ______________________________________________________ 58

SMTP Port Number______________________________________________________ 58

MTU Size _____________________________________________________________ 58

Enable alternate MAC____________________________________________________ 58

Ethernet Connection Type ________________________________________________ 59

Security Settings (Option 6)___________________________________________ 59

Disable SNMP__________________________________________________________ 59

SNMP Community Name _________________________________________________ 60

Disable Telnet Setup_____________________________________________________ 60

Disable TFTP Firmware Upgrade ___________________________________________ 60

Disable Port 77FE (Hex) __________________________________________________ 60

Disable Web Server _____________________________________________________ 60

Disable Web Setup ______________________________________________________ 61

Disable ECHO Ports _____________________________________________________ 61

Enable Enhanced Password_______________________________________________ 61

Disable Port 77F0 (Hex) __________________________________________________ 61

Contents

XPort Direct+ User Guide 7

Default Settings (Option 7) ___________________________________________ 61

Channel 1 Configuration Defaults ___________________________________________ 61

Expert Settings Defaults __________________________________________________ 62

Security Settings Defaults _________________________________________________ 62

Email Settings __________________________________________________________ 63

9: GPIO Interface 64

Configurable Pins __________________________________________________ 64

Features ______________________________________________________________ 64

Control Protocol____________________________________________________ 65

Guidelines _____________________________________________________________ 65

Commands ____________________________________________________________ 65

Examples_________________________________________________________ 67

10: Firmware Upgrades 69

Obtaining Firmware _________________________________________________ 69

Reloading Firmware ________________________________________________ 69

Using TFTP: Graphical User Interface _______________________________________ 69

Using TFTP: Command Line Interface _______________________________________ 70

Recovering the Firmware Using the Serial Port and DeviceInstaller ________________ 71

11: Monitor Mode 72

Entering Monitor Mode Using the Serial Port __________________________________ 72

Entering Monitor Mode Using the Network Port ________________________________ 72

Monitor Mode Commands_________________________________________________ 72

12: Troubleshooting 75

Problems and Error Messages ________________________________________ 75

Technical Support __________________________________________________ 78

A: Binary to Hexadecimal Conversions 79

Converting Binary to Hexadecimal _____________________________________ 79

Conversion Table _______________________________________________________ 79

Scientific Calculator _____________________________________________________ 79

XPort Direct+ User Guide 8

1: About This Guide

Purpose and Audience

This guide covers the Lantronix XPort Direct+. It provides the information needed to

configure, use, and update the XPort Direct+ firmware and is for OEMs and system

integrators who are embedding the XPort Direct+ in their product designs.

Chapter Summary

The remaining chapters in this guide include:

2: Introduction Describes the main features of the XPort Direct+ and the

protocols it supports.

3: Using DeviceInstaller Provides information for getting your unit up and running,

using DeviceInstaller to assign an IP address.

4: Configuration Using Web

Manager

Details using the Web-Manager to set parameters such

as port and server properties.

5: Configuration via Telnet or

Serial Port (Setup Mode)

Provides instructions for accessing Setup Mode

(command line interface) using a Telnet connection

through the network or a terminal or terminal emulation

program through the serial port.

6: Setup Mode: Server

Configuration

Details the network (server) settings

7: Setup Mode: Channel

Configuration

Details the serial port settings.

8: Setup Mode: Advanced

Settings

Details email, expert, and security settings and explains

how to reset the unit to factory default values.

9: GPIO Interface Provides instructions for configuring the three General

Purpose I/O pins (CP1-3).

10: Firmware Upgrades Provides instructions for obtaining the latest firmware and

updating the XPort Direct+.

11: Monitor Mode Provides instructions for accessing and using the

command line interface for monitoring the network and

diagnosing problems.

12: Troubleshooting Describes common problems and error messages and

how to contact Lantronix Technical Support.

A: Binary to Hexadecimal

Conversions

Provides instructions for converting binary numbers to

hexadecimals.

1: About This Guide

XPort Direct+ User Guide 9

Additional Documentation

The following guides are available on the product CD and the Lantronix web site

(www.lantronix.com).

XPort Direct+ Quick Start Provides the steps for getting the XPort

Direct+ evaluation board up and running.

XPort Direct+ Integration Guide Provides information about the XPort Direct+

hardware, testing the XPort Direct+ using the

evaluation board, and integrating the XPort

Direct+ into your product.

DeviceInstaller Online Help Provides information on using DeviceInstaller

to configure IP addresses and locate

Lantronix devices on the network.

XPort Direct+ User Guide 10

2: Introduction

This chapter summarizes the XPort Direct+ device server’s features and the basic

information needed to get started.

Capabilities

The XPort Direct+ device server has the following capabilities:

Connects devices through a TCP data channel or through a Telnet

connection to computers or to another device server. The XPort Direct+ also

supports UDP datagrams.

Contains a web [HTTP] server allowing presentation of custom content and

easy configuration through a browser.

Has three programmable I/O pins used to monitor or control attached

devices.

Applications

The XPort Direct+ device server connects serial devices such as those listed below

to Ethernet networks using the IP protocol family.

ATM machines

CNC controllers

Data collection devices

Environmental sensors

Universal Power Supply (UPS) management units

Telecommunications equipment

Data display devices

Security alarms and access control devices

Handheld instruments

Modems

Time/attendance clocks and terminals

Inhaltsverzeichnis

Andere Lantronix Server Handbücher

Lantronix

Lantronix SLC 8000 Bedienungsanleitung

Lantronix

Lantronix Console Server 3200 Bedienungsanleitung

Lantronix

Lantronix XPress DR+ Bedienungsanleitung

Lantronix

Lantronix ETS16PR Bedienungsanleitung

Lantronix

Lantronix PremierWave EN Bedienungsanleitung

Lantronix

Lantronix xPico Bedienungsanleitung

Lantronix

Lantronix CoBox-FL Bedienungsanleitung

Lantronix

Lantronix XPort Bedienungsanleitung

Lantronix

Lantronix xPico XPW100A003-01-B Kurzanleitung zur Einrichtung

Lantronix

Lantronix WiPort NR Bedienungsanleitung

Lantronix

Lantronix UDS1100 Bedienungsanleitung

Lantronix

Lantronix xPort Pro XPP1004000-02R Kurzanleitung zur Einrichtung

Lantronix

Lantronix XPort Kurzanleitung zur Einrichtung

Lantronix

Lantronix ETS Bedienungsanleitung

Lantronix

Lantronix SLC48 Bedienungsanleitung

Lantronix

Lantronix SecureBox SDS1100 Bedienungsanleitung

Lantronix

Lantronix DSTni-XPress DR Bedienungsanleitung

Lantronix

Lantronix EDS3000PR Bedienungsanleitung

Lantronix

Lantronix UDS1100 Bedienungsanleitung

Lantronix

Lantronix MatchPort b/g Pro Kurzanleitung zur Einrichtung

Lantronix

Lantronix XPress DR Bedienungsanleitung

Lantronix

Lantronix xSenso 2100 Bedienungsanleitung

Lantronix

Lantronix DeviceLinx EDS00812N-01 Bedienungsanleitung

Lantronix

Lantronix PremierWave XC Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung