Larson Davis NoiseTutor Bedienungsanleitung

NoiseTutor

System Manual

I021.02 Rev A NoiseTutor System Manual

NoiseTutor System Manual

Larson Davis

manual may not be copied in whole or in part for any use without prior written consent of PCB

Piezotronics, Inc.

Disclaimer

The following paragraph does not apply in any state or country where such statements are not

agreeable with local law:

Even though PCB Piezotronics, Inc. has reviewed its documentation, PCB Piezotronics, Inc. makes no

warranty or representation, either expressed or implied, with respect to this instrument and

documentation, its quality, performance, merchantability, or fitness for a particular purpose. This

documentation is subject to change without notice, and should not be construed as a commitment or

representation by PCB Piezotronics, Inc.

This publication may contain inaccuracies or typographical errors. PCB Piezotronics, Inc. will

periodically update the material for inclusion in new editions. Changes and improvements to the

information described in this manual may be made at any time.

Record of Purchase Date and Serial Number

Model 831 or

SoundTrack LxT: ________ Serial Number: ___________

Preamplifier Model: _________ Serial Number: ___________

Microphone Model: _________ Serial Number: ___________

Recycling

PCB Piezotronics, Inc. is an environmentally friendly organization and encourages our customers to

be environmentally conscious. When this product reaches its end of life, please recycle the product

through a local recycling center or return the product to:

PCB Piezotronics, Inc.

Attn: Recycling Coordinator

1681 West 820 North

Provo, Utah, USA 84601-1341

where it will be accepted for disposal

Product Warranty

Refer to our website, www.larsondavis.com, for a copy of the product warranty.

I021.02 Rev A NoiseTutor System Manual

Table of Contents

Chapter 1 Introduction 1-1

Setting up the NoiseTutor Station ...................................................1-2

Configuring the NoiseTutor Server .................................................1-3

System requirements for NoiseTutor Server Configuration ...........1-4

Installing NoiseTutor System Software ..........................................1-4

System Requirements for NoiseTutor System Software .................1-4

Chapter 2 Setting up the NoiseTutor Server 2-1

Installing IIS on Windows 7 ...........................................................2-1

Installing the NoiseTutor Server Configuration Tool ...................2-11

Running the NoiseTutor Configuration Tool ................................2-13

Creating User Accounts for FTP Uploads ....................................2-17

Setting up FTP Servers ..................................................................2-27

Configuring Windows Firewalls ...................................................2-31

Verifying Access to FTP Servers ..................................................2-40

Local Access .......................................................................................2-40

Local Network Access ........................................................................2-41

Public Access ......................................................................................2-42

Verifying Browser Connections ....................................................2-43

Chapter 3 Installation and Set-up 3-1

Installing NoiseTutor Software .......................................................3-1

Starting the NoiseTutor Station .......................................................3-3

Installing NoiseTutor System Licenses ...........................................3-4

Setting up Data Transmission .........................................................3-5

Deliver Data Files via E-mail ................................................................3-5

Deliver Data Files to an FTP Site .......................................................3-10

Create and Deliver Graphical Reports via E-mail ...............................3-12

Create and Publish Graphical Reports to Web Site ............................3-15

Chapter 4 NoiseTutor Station Setup Menu 4-1

Working Mode ......................................................................................4-2

Main Setup ............................................................................................ 4-3

Recipient Lists ...................................................................................... 4-5

Graph Setup .......................................................................................... 4-7

Data File ............................................................................................... 4-9

E-mail Service ..............................................................................................4-9

FTP Setup Service ......................................................................................4-11

Realtime Report Setup ........................................................................ 4-12

E-mail Publishing .......................................................................................4-13

Web Publishing ..........................................................................................4-14

System Administration Messages ....................................................... 4-18

Chapter 5 Commands Menu 1

Main commands ................................................................................... 5-1

Appendix A Technical Specifications A-1

System Power Requirements ................................................................A-1

Physical .................................................................................................A-1

Environmental ......................................................................................A-1

Station PC (provided) ...........................................................................A-2

Items not Included ................................................................................A-2

Appendix B Shipping Instructions B-1

NoiseTutor System Manual Introduction 1-1

CHAPTER

1Introduction

This manual describes how to set up and configure the

Larson Davis NoiseTutor System. The NoiseTutor System is

designed to interact with noise monitoring stations. It

provides portable and remote observation of monitoring

sites through a web interface.

Setting up the NoiseTutor System includes the following

steps:

Step 1 Setting up the NoiseTutor station

Step 2 Configuring the NoiseTutor server

The NoiseTutor System software

comes pre-installed when NoiseTutor

is purchased as a system.

Step 3 Installing the NoiseTutor System software, if not

already pre-installed.

Figure 1-1 shows the components and architecture of the

NoiseTutor System.

NoiseTutor System Manual 1-2

FIGURE 1-1 Components and Architecture - NoiseTutor System

Setting up the NoiseTutor Station

Start by reading the NoiseTutor

Quick Start Guide. It is a card

located inside your station case that

describes the steps for deploying

your NoiseTutor station.

To set up your NoiseTutor station, refer to the NoiseTutor

Quick Start Guide and the NoiseTutor Installation

Reference.

The NoiseTutor station consists of the following:

• The NoiseTutor Quick Reference Guide

The NoiseTutor Installation

Reference is located inside your

NoiseTutor station case and

describes the assembly and

operation of your station.

• The NoiseTutor Installation Reference

• Model 831 or SoundTrack LxT®sound level meter

• Preamplifier model PRM831, PRMLxT1, PRMLxT1L,

PRMLxT2, or PRMLxT2L.

• Microphone model number 377B02 or 377B20

• Microphone cable connecting Model 831 to

preamplifier/microphone

1-3 NoiseTutor System Manual

Note: Larson Davis does not supply

an active SIM card. You must obtain

one separately.

• Active SIM card

Refer to the NoiseTutor Installation Reference on the inside

of the NoiseTutor case to install your system hardware.

Configuring the NoiseTutor Server

Larson Davis provides server configuration aids with the

NoiseTutor System to provide web access to sound level

monitoring sites. This includes the NoiseTutor Server

Configuration Tool that can be used with the instructions in

this manual to set up a server on a Windows-based

computer. The server consists of both a website--with a

collection of pre-designed web pages--and an FTP site.

The pre-designed server web pages present information

from each monitoring site in the following forms:

• Ten-minute report

• One-hour report

• One-day report

• One-week report

• One-month report

Although you can use any web site server that is capable of

rendering HTML pages, along with Java Script, with the

NoiseTutor System, the configuration aids in this manual

describe the steps for using Internet Information Services

(IIS) from Microsoft. This manual describes configuration

with IIS because it is currently the most common web server

for Windows and it is available at no cost.

Although the NoiseTutor system

provides server configuration aids,

you are responsible for setting up the

web server.

By setting up an FTP site, you can collect noise monitoring

data from Noise Tutor clients. This data can then be

displayed in graphic reports for each monitoring site on a

web site.

The process of installing and configuring the NoiseTutor

Server involves complex and technical tasks, and generally

requires the services of an IT professional. For your

assistance, detailed instructions for installing and

configuring the NoiseTutor Server on a Windows 7 platform

are provided in this manual.

The NoiseTutor System also functions on Windows XP SP 3

and Windows Vista SP 1. However, the steps and options are

NoiseTutor System Manual 1-4

different than those represented in this manual. To install

and configure the NoiseTutor System on these platforms,

Larson Davis recommends that you consult with an IT

professional. Detailed instructions for setting up a server on

other platforms are not available from Larson Davis.

System requirements for NoiseTutor Server

Configuration

• Windows 7 SP 1, Server or Professional editions. Server

edition is recommended.

• IIS 5.1 or higher

• One or more NoiseTutor Noise Monitoring Systems

(NMS)

• One 831 analyzer serial number for each NMS

Installing NoiseTutor System Software

The NoiseTutor System software comes pre-installed when

ordering the NMS-021 (with Model 831 or SoundTrack LxT

analyzers), and the EPS 041 (without Model 831 or

SoundTrack LxT analyzers). For other configurations, the

software must be installed on the PC that is connected to the

sound level meter. The software interacts with noise

monitoring stations by downloading measured data from the

sound level meters at predefined intervals. It then sends data

or graphical reports to specified recipients. If your system

does not include pre-installed software, refer to the

instructions in the chapter “Installation and Setup.”

System Requirements for NoiseTutor System

Software

• Larson Davis analyzers 824, 831 and SoundTrack LxT.

• All Windows operating system versions, starting from

Windows 2000.

NoiseTutor System Manual Setting up the NoiseTutor Server 2-1

CHAPTER

2Setting up the NoiseTutor

Server

This chapter lists and describes the steps for setting up the

NoiseTutor server on the Windows 7 operating system. To

install the server, complete the following process:

Although the NoiseTutor System

provides server configuration aids,

you are responsible for setting up the

web server.

1. Install IIS on Windows 7.

2. Configure the IIS web server.

3. Install the NoiseTutor Server Configuration Tool.

4. Run the NoiseTutor Server Configuration Tool.

5. Create an FTP user account.

6. Configure the Windows Firewall.

Each step is described in more detail in the following

sections.

Before You Begin: The process of installing and config-

uring the NoiseTutor Server involves complex and technical

tasks, and generally requires the services of an IT profes-

sional. These detailed instructions are provided for the con-

venience of an IT professional working with your NoiseTutor

System.

Installing IIS on Windows 7

The NoiseTutor System also functions on Windows XP SP 3

and Windows Vista SP 1. However, the steps and options are

different than those represented in this manual. To install

and configure the NoiseTutor System on these platforms,

Larson Davis recommends that you consult with an IT

professional. Detailed instructions for setting up a server on

other platforms are not available from Larson Davis.

Installing the IIS addin provides your host PC with both

web- and FTP-server functionality. If you do not want to use

IIS, you will need to supply your own web server and FTP

server. To install IIS, follow these steps:

Inhaltsverzeichnis

Andere Larson Davis Messgerät Handbücher

Larson Davis

Larson Davis SoundAdvisor 831C Bedienungsanleitung

Larson Davis

Larson Davis HVM100 Bedienungsanleitung

Larson Davis

Larson Davis HVM200 Bedienungsanleitung

Larson Davis

Larson Davis SoundAdvisor 831C Bedienungsanleitung

Larson Davis

Larson Davis SoundAdvisor 831C Bedienungsanleitung

Larson Davis

Larson Davis Spartan 821 Bedienungsanleitung

Larson Davis

Larson Davis Spartan 730 Bedienungsanleitung

Larson Davis

Larson Davis System 824 Bedienungsanleitung

Larson Davis

Larson Davis System 824 Produkthandbuch

Larson Davis

Larson Davis Spartan 730 Bedienungsanleitung

Larson Davis

Larson Davis System 824 Installationsanleitung

Larson Davis

Larson Davis SoundTrack LxT N/Forcer Bedienungsanleitung

Larson Davis

Larson Davis SoundAdvisor NMS045 Bedienungsanleitung

Larson Davis

Larson Davis SoundTrack LxT Bedienungsanleitung

Larson Davis

Larson Davis System 824 Installationsanleitung

Larson Davis

Larson Davis SoundAdvisor 831C Bedienungsanleitung

Larson Davis

Larson Davis HVM100 Bedienungsanleitung

Larson Davis

Larson Davis AudCal Bedienungsanleitung

Larson Davis

Larson Davis Spartan 730 Bedienungsanleitung

Larson Davis

Larson Davis 831 Bedienungsanleitung

Larson Davis

Larson Davis 820 Produkthandbuch

Larson Davis

Larson Davis HVM200 Bedienungsanleitung

Larson Davis

Larson Davis Spartan 730 Bedienungsanleitung

Larson Davis

Larson Davis 820 Gebrauchsanweisung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung