LaserLiner AutoCross-Laser ACL 3 P Bedienungsanleitung

AutoCross-Laser ACL 3 P

Bedienungsanleitung

Operating instructions

Gebruiksaanwijzing

Betjeningsvejledning

Mode d´emploi

Instrucciones para su uso

Istruzioni d'uso

Instrukcja Obsługi

Käyttöohje

3-6

7-10

11-14

15-18

19-22

23-26

27-30

31-34

35-38

AutoCross-Laser ACL 3 P

ENGLISH 7

The cross-line laser with 3 line lasers and 1 plumb line laser

The automatic line laser with laser crosses projected forwards and upwards

and additional plumb line laser. Thanks to the upward laser cross and the

plumb line laser, it is easy to draw a plumb line from ceiling to floor.

Automatic alignment through pendulum system, 3.5° self-levelling range with

magnetic damping. 4 individually activatable lasers, laser wavelength 635 nm.

The rotatable housing allows the laser to be precisely positioned. Through the

removable base, the ACL 3 P can be used with or without a tripod.

Includes: Base with adjustable feet, magnetic target plate, laser enhancement

glasses, carrying bag, batteries.

General safety instructions

Caution: Do not look directly into the beam. Lasers must be kept out of

reach of children. Never intentionally aim the device

at people. This is a quality laser measuring device

and is 100% factory adjusted within the stated tole-

rance. For reasons of product liability, we must also

draw your attention to the following: Regularly check the calibration before

use, after transport and after extended periods of storage. We also wish to

point out that absolute calibration is only possible in a specialist workshop.

Calibration by yourself is only approximate and the accuracy of the

calibration will depend on the care with which you proceed.

Note: This product is a precision instrument that must be handled and

treated with care. Avoid shocks and impact. Always keep and carry in the

case! Switch all lasers off and secure the pendulum. For cleaning, use a soft

cloth and glass cleaner.

LASER LIGHT

DO NOT LOOK INTO

THE BEAM!

CLASS 2 M LASER

EN 60825-1:2001

Warranty:

The warranty period is 2 years from the date of purchase. The warranty

covers all material or manufacturing defects occurring during this time. The

following are excluded from warranty: Damage due to improper use (e.g.

operation with wrong type of current/voltage, connection to unsuitable

power source, fall onto hard surface, etc.) or improper storage, normal wear

and tear, and defects which only insignificantly impair the value or suitability

for use. Any tampering by unauthorised persons will render this warranty

void. In the event that you need to claim warranty, please take the complete

device together with all information and the invoice to one of our dealers or

send it in to Umarex-Laserliner.

AutoCross-Laser ACL 3 P

ENGLISH8

1Window for vertical

laser line

2Window for horizontal

laser line

3On / Off switch Transport

securing device

4Knob for precision

adjustment

5Base

6Adjustable feet

7Window for plumb

laser

8Battery compartment

9Window for upward

laser line

10 Round vial for rough

adjustment

11 Control field for

activating the lasers

Inserting the batteries: Open the battery compartment (8) and insert the

batteries in accordance with the installation symbols, ensuring the correct

polarity. Close the cover.

Switching on: Turn the On/Off switch (3) to the right, thereby releasing the

transport securing device. The lasers can now be individually activated via the

control field (11).

Note: If the device is too far off the horizontal (more than 3.5°), a warning

signal will sound and, if switched on, the lasers will blink. Align the device

using the adjustable feet or place on a more level surface. The round vial

(10) is provided as an aid to alignment.

AutoCross-Laser ACL 3 P

Technical data

Self-levelling range +3,5°

Precision +3 mm / 10 m

Working range (depending on ambient brightness) 20 m

Laser wavelength 635 nm

Laser / Laser output rating Classe 2 M / < 5 mW

Laser / Laser output rating Classe 2 / < 1 mW

Power supply / battery life 3 x 1,5V AA / ca. 48 h

Weight 1,4 kg

Operating temperature 0°C ... +50°C

Storage temperature -10°C ... + 70°C

Order number 034.00.00 A

Subject to technical alterations 04/2004

Note: Regularly check the calibration before use, after transport and after

extended periods of storage.

Note: For transport, the ACL 3 P must always be

switched off with the transport securing device (3)

so as to protect device from damage.

Alignment

For approximate alignment, the upper part of the

device can be turned on the base. Exact positioning

can be done with the adjusting knob (4). Because

of the adjustable feet (6), the device can also be

placed on surfaces which are not level.

Use with tripod

For easy use, the ACL 3 P can be mounted on a

tripod (5/8" thread). To do this, the upper part

must be removed from the base.

ENGLISH 9

Checking the vertical line: Position the device about 5 m from a wall. Fix a

plumb bob with a line of 2.5 m length on the wall, making sure that the bob

can swing freely. Switch on the device and align the vertical laser to the plumb

line. The precision is within the specified tolerance if the deviation between the

laser line and the plumb line is not greater than ± 1.5 mm.

Checking the horizontal line:

Position the device about 5 m from a wall and

switch on the cross laser. Mark point B on the wall.

Turn the laser cross approx. 2.5 m to the right and

mark point C. Check whether the horizontal line

from point C is level with point B to within ± 2 mm.

Repeat the process by turning the laser to the left.

AutoCross-Laser ACL 3 P

ENGLISH

Performing the calibration check:

3. Position the device as near as possible to the wall at the height of

point A1.

4. Turn the device

through 180° and

mark point A3. The

difference between

points A2 and A3 is

the tolerance.

Preparing the calibration check:

It is possible for you to check the calibration of the laser. To do this, position

the device midway between 2 walls, which must be at least 5 metres apart.

Switch the device on (Laser cross ON). The best calibration results are achie-

ved if the device is mounted on a tripod. 1. Mark point A1 on the wall.

2. Turn the device

through 180° and

mark point A2.

You now have a

horizontal reference

between points A1

and A2.

180°

Note: If points A2 and A3 are more than 3 mm / 10 m, the device is in

need of calibration. Contact your authorised dealer or else the UMAREX-

LASERLINER Service Department.

2,5 m

<2 mm = OK

180°

<3 mm / 10 m = OK

AutoCross-Laser ACL 3 P

Zubehör (optional)

Accessories (optional)

Accessoires (optioneel)

Tilbehør (flere typer)

Accessoires (en option)

Accesorios (opcional)

Accessori (optional)

Akcesoria (opcja)

Lisämahdollisuuksia

valinnaisvarusteilla

Art.-Nr: 090.120

Art.-Nr: 080.00

max. 165 cm

min. 95 cm

max. 160 cm

www.laserliner.com

min 143 cm – max. 327 cm

Art.-Nr: 023.61A

GmbH & Co KG

Donnerfeld 2

59757 Arnsberg, Germany

Tel.: +49 2932 638-300, Fax: -333

www.laserliner.com

Dirección de envío y de servicio

post-venta:

Telefon: +49 2932 638-300

Fax +49 2932 638-333

Indirizzo servizio manutenzione

- Indirizzo di spedizione

Telefono +49 2932 638-300

Fax +49 2932 638-333

Adres serwisu i wysyłki:

Telefon serwisu +49 2932 638-300

Fax +49 2932 638-333

Huolto- ja lähetysosoite:

Puhelin +49 2932 638-300

Fax +49 2932 638-333

Service- und Versand-Anschrift:

Service-Telefon +49 2932 638-486

Fax +49 2932 638-489

Service- and Shipping Address:

Service phone +49 2932 638-300

Fax +49 2932 638-333

Service- en verzendadres:

Servicetelefoon +49 2932 638-300

Fax +49 2932 638-333

Service- og Postadresse

Service-Telefon +49 2932 638-486

Fax +49 2932 638-489

Livraison et expédition:

Téléphone: +49 2932 638-330

Fax +49 2932 638-333 Umarex GmbH & Co KG

– Laserliner –

Möhnestraße 149

59755 Arnsberg, Germany

laserliner@umarex.de

AutoCross-Laser ACL 3 P

LASERSTRAHLUNG

NICHT IN DEN

STRAHL BLICKEN!

LASER KLASSE 2 M

EN 60825-1:2001

Inhaltsverzeichnis

Andere LaserLiner Messgerät Handbücher

LaserLiner

LaserLiner MultiFinder Pro Bedienungsanleitung

LaserLiner

LaserLiner LaserRange-Master T4 Pro Bedienungsanleitung

LaserLiner

LaserLiner EasyCross-Laser Green Bedienungsanleitung

LaserLiner

LaserLiner ClimaHome-Check Bedienungsanleitung

LaserLiner

LaserLiner SuperSquare Bedienungsanleitung

LaserLiner

LaserLiner RangeXtender RX 30 Bedienungsanleitung

LaserLiner

LaserLiner Revolution Bedienungsanleitung

LaserLiner

LaserLiner AirMonitor FRESH Bedienungsanleitung

LaserLiner

LaserLiner SensoLite 100 Bedienungsanleitung

LaserLiner

LaserLiner AirMonitor PURE Bedienungsanleitung

LaserLiner

LaserLiner CondenseSpot Pro Bedienungsanleitung

LaserLiner

LaserLiner CompactPalm-Laser PowerBright Plus Bedienungsanleitung

LaserLiner

LaserLiner SmartLine-Laser 360 Bedienungsanleitung

LaserLiner

LaserLiner VideoScope XL Bedienungsanleitung

LaserLiner

LaserLiner PowerCross-Laser 5 Combi Bedienungsanleitung

LaserLiner

LaserLiner DampFinder Compact Bedienungsanleitung

LaserLiner

LaserLiner HandyLaser Bedienungsanleitung

LaserLiner

LaserLiner ActiveFinder Pro Bedienungsanleitung

LaserLiner

LaserLiner BeamControl-Master BCM Bedienungsanleitung

LaserLiner

LaserLiner ClimaHome-Check Bedienungsanleitung

LaserLiner

LaserLiner G40 Bedienungsanleitung

LaserLiner

LaserLiner ThermoSpot XP Bedienungsanleitung

LaserLiner

LaserLiner LaserRangeMaster Pocket Bedienungsanleitung

LaserLiner

LaserLiner CenterScanner Plus TX Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung